Krajina, Zahraničie, Príroda, Česko, Biotopy, Fotografie

Panská skála v Kamenickom Šenove

Hits: 371

Kamenický Šenov je mesto nachádzajúce sa na rozhraní dvoch chránených krajinných oblastí – Českého stredohoria a Lužických hôr. V nadmorskej výške 350 až 550 metrov nad morom. Mesto sa skladá z dvoch častí: Kamenický Šenov a Prácheň, s celkovým počtom približne 4 000 obyvateľov. Prvá písomná zmienka o Kamenickom Šenove pochádza z roku 1352, kde je v kronike Českej Kamenice uvedená obec nazývaná Sonov, založená prisťahovalcami z Lužice. Kamenický Šenov je svetoznámy svojou takmer tristo ročnou nepretržitou tradíciou výroby nádherných krištáľových lustrov a umeleckého skla. Prvé zmienky o miestnych sklárskych majstroch pochádzajú zo 17. storočia, keď obyvatelia začali spracovávať sklo dovážané z neďalekých sklární v Chřibskej, založenej už v roku 1414. V roku 1856 tu bola založená prvá odborná sklárska škola na svete, ktorá dodnes funguje a je najstaršou svojho druhu (kamenicky-senov.cz). Medzi najvýznamnejšie mesta patrí kostol Narodenia svätého Jána Krstiteľa, baroková stavba z rokov 1715–1718. Históriu sklárstva v meste predstavuje Sklárske múzeum Kamenický Šenov, ktoré sídli v historickom dome z roku 1770. Mesto tiež udržiava partnerské vzťahy s nemeckým mestom Rheinbach (en.wikipedia.org). Kamenický Šenov je sídlom najväčšieho českého výrobcu lustrov a svitidiel Preciosa Lustry (Informačná tabuľa).

Národnou prírodnou pamiatkou a symbolom mesta je Panská skála, známa aj ako „kamenné varhany“. Ide o čadičovú skalu, ktorá je najnavštevovanejšou geologickou formáciou v Českej republike (en.wikipedia.org). Nachádza sa pri obci Prácheň (cs.wikipedia.org). Panská skala sa nachádza približne 80 kilometrov severne od Prahy, medzi mestami Kamenický Šenov a Nový Bor (amazingczechia.com). Tento geologický fenomén je pozoruhodný svojou výraznou stĺpovitou odlučnosťou. Je tvorená päť až šesťbokými čadičovými stĺpmi, ktoré dosahujú dĺžku až 12 metrov a priemer okolo 20–25 centimetrov. Tieto stĺpy sú usporiadané prevažne vertikálne, niektoré sú šikmo orientované. Celý útvar vznikol pred približne 30 miliónmi rokov počas treťohôr v dôsledku vulkanickej činnosti, keď láva chladla a kryštalizovala, čo viedlo k tvorbe týchto charakteristických stĺpov (cs.wikipedia.org). Čadičová magma vystúpila z podložia, z hĺbky väčšej než 30 km, približne pred 25 miliónmi rokmi, ale nikdy nevytiekla na povrch. Chránená pod povrchom, chladla veľmi pomaly, čím začala vznikať typická čadičová odlučnosť, ktorú je možné dnes pozorovať (kudyznudy.cz).

Ťažba čadiča na Panskej skale prebiehala od 19. storočia, čo viedlo k odhaleniu a zvýrazneniu stĺpovitej štruktúry . V roku 1895 bola vyhlásená za chránený geologický útvar, čím sa stala najstaršou geologickou rezerváciou na území Českej republiky. Napriek tomuto statusu ťažba pokračovala až do roku 1914, keď územie odkúpili miestne úrady a ťažbu definitívne zastavili. Po druhej svetovej vojne bola tohto územia ešte viac posilnená (amazingczechia.com). Dnes je Panská skala obľúbeným turistickým cieľom, pri úpätí skaly sa nachádza malé jazierko, ktoré vzniklo zaplnením bývalého lomu dažďovou vodou (ceskehory.cz). Panská skala sa stala známou aj vďaka českému filmu „Pyšná princezna“ z roku 1952, kde poslúžila ako kulisa pre niektoré scény (kudyznudy.cz).


Kamenický Šenov is a town located at the intersection of two protected landscape areas – the České Středohoří and the Lusatian Mountains, at an altitude of 350 to 550 meters above sea level. The town consists of two parts: Kamenický Šenov and Prácheň, with a total population of approximately 4,000 inhabitants. The first written mention of Kamenický Šenov dates back to 1352, where a settlement called Sonov, founded by settlers from Lusatia, is recorded in the chronicle of Česká Kamenice. Kamenický Šenov is world-famous for its nearly 300-year-old continuous tradition of producing magnificent crystal chandeliers and artistic glass. The first records of local glassmakers date back to the 17th century when residents began processing glass imported from nearby glassworks in Chřibská, established in 1414. In 1856, the first specialized glass school in the world was founded here, which still operates today and is the oldest of its kind (kamenicky-senov.cz).

Among the town’s most significant landmarks is the Church of the Nativity of St. John the Baptist, a Baroque building from 1715–1718. The history of glassmaking in the town is represented by the Kamenický Šenov Glass Museum, housed in a historic building from 1770. The town also maintains a partnership with the German city of Rheinbach (en.wikipedia.org). Kamenický Šenov is home to Preciosa Lustry, the largest Czech manufacturer of chandeliers and lighting fixtures (Information board).

The national natural monument and symbol of the town is Panská skála, also known as the „Stone Organ.“ This basalt rock formation is the most visited geological site in the Czech Republic (en.wikipedia.org). It is located near the village of Prácheň (cs.wikipedia.org), about 80 kilometers north of Prague, between the towns of Kamenický Šenov and Nový Bor (amazingczechia.com). This geological phenomenon is remarkable for its distinctive columnar jointing. It consists of five- to six-sided basalt columns that reach up to 12 meters in length and have a diameter of around 20–25 cm. These columns are predominantly arranged vertically, while some are tilted. The entire formation originated about 30 million years ago during the Tertiary period due to volcanic activity when lava cooled and crystallized, forming these characteristic columns (cs.wikipedia.org). The basalt magma rose from a depth of more than 30 km approximately 25 million years ago but never reached the surface. Protected beneath the surface, it cooled very slowly, leading to the formation of the typical basaltic structure observed today (kudyznudy.cz).

Basalt extraction at Panská skála took place from the 19th century, revealing and emphasizing the rock’s columnar structure. In 1895, it was declared a protected geological site, making it the oldest geological reserve in the Czech Republic. Despite this status, mining continued until 1914, when the local authorities purchased the area and permanently halted extraction. After World War II, protection of this site was further strengthened (amazingczechia.com). Today, Panská skála is a popular tourist destination, with a small lake at its base that was formed by rainwater filling the former quarry (ceskehory.cz). Panská skála also gained fame thanks to the Czech film The Proud Princess (1952), where it served as a backdrop for some scenes (kudyznudy.cz).


Kamenický Šenov ist eine Stadt an der Schnittstelle zweier geschützter Landschaftsgebiete – des Böhmischen Mittelgebirges (České středohoří) und des Lausitzer Gebirges (Lužické ) – in einer Höhe von 350 bis 550 Metern über dem Meeresspiegel. Die Stadt besteht aus zwei Teilen: Kamenický Šenov und Prácheň, mit einer Gesamtbevölkerung von etwa 4.000 Einwohnern. Die erste schriftliche Erwähnung von Kamenický Šenov stammt aus dem Jahr 1352, als in der Chronik von Česká Kamenice eine Siedlung namens Sonov erwähnt wurde, die von Siedlern aus der Lausitz gegründet wurde. Kamenický Šenov ist weltweit bekannt für seine fast 300-jährige ununterbrochene Tradition in der Herstellung prächtiger Kristalllüster und künstlerischer Glaswaren. Erste Aufzeichnungen über lokale Glasmeister stammen aus dem 17. Jahrhundert, als die Bewohner begannen, Glas aus nahegelegenen Glashütten in Chřibská zu verarbeiten, die bereits 1414 gegründet wurde. Im Jahr 1856 wurde hier die erste Fachschule für Glas weltweit gegründet, die noch heute existiert und die älteste ihrer Art ist (kamenicky-senov.cz).

Zu den bedeutendsten Sehenswürdigkeiten der Stadt gehört die Kirche der Geburt Johannes des Täufers, ein barockes Bauwerk aus den Jahren 1715–1718. Die Geschichte der Glasherstellung in der Stadt wird im Glasmuseum Kamenický Šenov dokumentiert, das sich in einem historischen Gebäude aus dem Jahr 1770 befindet. Die Stadt pflegt außerdem eine Städtepartnerschaft mit der deutschen Stadt Rheinbach (en.wikipedia.org). Kamenický Šenov ist Sitz des größten tschechischen Herstellers von Kronleuchtern und Leuchten, Preciosa Lustry (Informationstafel).

Das nationale Naturdenkmal und Wahrzeichen der Stadt ist die Panská skála, auch bekannt als die „Steinerne Orgel“. Diese Basaltformation ist die meistbesuchte geologische Sehenswürdigkeit in der Tschechischen Republik (en.wikipedia.org). Sie befindet sich in der Nähe des Dorfes Prácheň (cs.wikipedia.org), etwa 80 Kilometer nördlich von Prag, zwischen den Städten Kamenický Šenov und Nový Bor (amazingczechia.com). Dieses geologische Phänomen ist bemerkenswert für seine ausgeprägte säulenförmige Absonderung. Es besteht aus fünf- bis sechseckigen Basaltsäulen, die bis zu 12 Meter lang sind und einen Durchmesser von etwa 20–25 cm haben. Diese Säulen sind überwiegend vertikal angeordnet, einige sind jedoch schräg ausgerichtet. Die gesamte Formation entstand vor etwa 30 Millionen Jahren während des Tertiärs durch vulkanische Aktivität, als Lava abkühlte und kristallisierte, wodurch diese charakteristischen Säulen entstanden (cs.wikipedia.org). Die basaltische Magma stieg vor etwa 25 Millionen Jahren aus einer Tiefe von mehr als 30 km auf, erreichte jedoch nie die Erdoberfläche. Geschützt unter der Erdkruste kühlte sie sehr langsam ab, was zur typischen basaltenen Absonderung führte, die heute beobachtet werden kann (kudyznudy.cz).

Der Basaltabbau an der Panská skála begann im 19. Jahrhundert und führte zur Freilegung und Hervorhebung der säulenförmigen Struktur des Gesteins. Im Jahr 1895 wurde sie als geschütztes geologisches Naturdenkmal ausgewiesen und ist somit das älteste geologische Reservat in der Tschechischen Republik. Trotz dieses Schutzstatus‘ wurde der Bergbau bis 1914 fortgesetzt, als die örtlichen Behörden das Gebiet erwarben und den Abbau endgültig einstellten. Nach dem Zweiten Weltkrieg wurde der Schutz dieses Gebiets weiter verstärkt (amazingczechia.com). Heute ist die Panská skála ein beliebtes Touristenziel. Am Fuße des Felsens befindet sich ein kleiner See, der durch Regenwasser entstanden ist, das den ehemaligen Steinbruch füllte (ceskehory.cz). Die Panská skála wurde auch durch den tschechischen Film Die stolze Prinzessin (1952) bekannt, in dem sie als Kulisse für einige Szenen diente (kudyznudy.cz).


Kamenický Šenov to miasto położone na styku dwóch chronionych obszarów krajobrazowych – Czeskiego Średniogórza (České středohoří) i Gór Łużyckich (Lužické hory), na wysokości od 350 do 550 m n.p.m. Miasto składa się z dwóch części: Kamenický Šenov i Prácheň, z łączną liczbą mieszkańców około 4 000. Pierwsza pisemna wzmianka o Kamenickým Šenovie pochodzi z 1352 roku, gdzie w kronice Českiej Kamenice wspomniano o osadzie Sonov, założonej przez osadników z Łużyc. Kamenický Šenov jest znany na całym świecie ze swojej prawie 300-letniej nieprzerwanej tradycji produkcji wspaniałych kryształowych żyrandoli i szkła artystycznego. Pierwsze wzmianki o miejscowych hutnikach szkła pochodzą z XVII wieku, kiedy mieszkańcy zaczęli przetwarzać szkło sprowadzane z pobliskich hut w Chřibskiej, założonych już w 1414 roku. W 1856 roku powstała tutaj pierwsza na świecie specjalistyczna szkoła szklarska, która działa do dziś i jest najstarszą tego typu placówką (kamenicky-senov.cz). Do najważniejszych zabytków miasta należy kościół Narodzenia św. Jana Chrzciciela, barokowa budowla z lat 1715–1718. Historię hutnictwa szkła w mieście przedstawia Muzeum Szkła w Kamenickým Šenovie, mieszczące się w zabytkowym budynku z 1770 roku. Miasto utrzymuje także partnerstwo z niemieckim Rheinbachem (en.wikipedia.org). Kamenický Šenov jest siedzibą największego czeskiego producenta żyrandoli i oświetlenia, Preciosa Lustry (Tablica informacyjna).

Narodowym pomnikiem przyrody i symbolem miasta jest Panská skála, znana również jako „Kamienne Organy”. Ta bazaltowa formacja skalna jest najczęściej odwiedzaną atrakcją geologiczną w Czechach (en.wikipedia.org). Znajduje się w pobliżu wsi Prácheň (cs.wikipedia.org), około 80 kilometrów na północ od Pragi, między miastami Kamenický Šenov i Nový Bor (amazingczechia.com). To zjawisko geologiczne wyróżnia się charakterystyczną kolumnową strukturą. Składa się z pięcio- i sześciokątnych kolumn bazaltowych, które osiągają długość do 12 metrów i średnicę około 20–25 cm. Kolumny te są ułożone głównie pionowo, choć niektóre są nachylone. Cała formacja powstała około 30 milionów lat temu w okresie trzeciorzędu w wyniku działalności wulkanicznej, gdy lawa stygnęła i krystalizowała, tworząc te charakterystyczne kolumny (cs.wikipedia.org). Magma bazaltowa wynurzyła się z głębokości ponad 30 km około 25 milionów lat temu, ale nigdy nie wypłynęła na powierzchnię. Chroniona pod ziemią, ochładzała się bardzo powoli, co doprowadziło do powstania typowej struktury bazaltowej, którą można dziś podziwiać (kudyznudy.cz). Wydobycie bazaltu na Panskiej skale rozpoczęło się w XIX wieku, co pozwoliło na odsłonięcie i uwydatnienie kolumnowej struktury skały. W 1895 roku została ona uznana za chroniony pomnik geologiczny, co czyni ją najstarszym rezerwatem geologicznym w Czechach. Pomimo tego statusu wydobycie trwało do 1914 roku, kiedy władze lokalne wykupiły teren i definitywnie zakończyły eksploatację. Po II wojnie światowej ochrona tego obszaru została dodatkowo wzmocniona (amazingczechia.com).

Dziś Panská skála jest popularnym celem turystycznym, u podnóża której znajduje się niewielkie jezioro powstałe w wyniku wypełnienia dawnego kamieniołomu wodą deszczową (ceskehory.cz). Panská skála zyskała także sławę dzięki czeskiemu filmowi Dumna księżniczka (1952), w którym posłużyła jako tło dla niektórych scen (kudyznudy.cz).


Kamenický Šenov je město nacházející se na rozhraní dvou chráněných krajinných oblastí – Českého středohoří a Lužických hor, v nadmořské výšce 350 až 550 metrů. Město se skládá ze dvou částí: Kamenický Šenov a Prácheň, s celkovým počtem přibližně 4 000 obyvatel. První písemná zmínka o Kamenickém Šenově pochází z roku 1352, kdy je v kronice České Kamenice uvedena obec nazývaná Sonov, založená přistěhovalci z Lužice. Kamenický Šenov je světově proslulý svou téměř třistaletou nepřetržitou tradicí výroby nádherných křišťálových lustrů a uměleckého skla. První zmínky o místních sklářských mistrech pocházejí ze 17. století, kdy obyvatelé začali zpracovávat sklo dovážené z nedalekých skláren v Chřibské, které byly založeny již v roce 1414. V roce 1856 zde byla založena první odborná sklářská škola na světě, která funguje dodnes a je nejstarší svého druhu (kamenicky-senov.cz). Mezi nejvýznamnější památky města patří kostel Narození svatého Jana Křtitele, barokní stavba z let 1715–1718. Historii sklářství v městě představuje Sklářské muzeum Kamenický Šenov, které sídlí v historickém domě z roku 1770. Město také udržuje partnerské vztahy s německým městem Rheinbach (en.wikipedia.org). Kamenický Šenov je sídlem největšího českého výrobce lustrů a svítidel Preciosa Lustry (Informační tabule).

Národní přírodní památkou a symbolem města je Panská skála, známá také jako „kamenné varhany“. Tato čedičová skalní formace je nejnavštěvovanější geologickou lokalitou v České republice (en.wikipedia.org). Nachází se poblíž Prácheň (cs.wikipedia.org), přibližně 80 kilometrů severně od Prahy, mezi městy Kamenický Šenov a Nový Bor (amazingczechia.com). Tento geologický fenomén je pozoruhodný svou výraznou sloupcovitou odlučností. Tvoří ho pětiboké až šestiboké čedičové sloupce, které dosahují délky až 12 metrů a průměru okolo 20–25 cm. Tyto sloupce jsou převážně uspořádány vertikálně, některé jsou však nakloněné. Celý útvar vznikl přibližně před 30 miliony let během třetihor v důsledku vulkanické činnosti, kdy láva chladla a krystalizovala, což vedlo k tvorbě těchto charakteristických sloupců (cs.wikipedia.org). Čedičová magma vystoupila z hloubky větší než 30 km přibližně před 25 miliony let, ale nikdy nevytekla na povrch. Chránína pod povrchem chladla velmi pomalu, což vedlo ke vzniku typické čedičové odlučnosti, kterou je možné dnes pozorovat (kudyznudy.cz).

Těžba čediče na Panské skále probíhala od 19. století, což vedlo k odhalení a zvýraznění sloupcovité struktury skály. V roce 1895 byla vyhlášena chráněným geologickým útvarem, čímž se stala nejstarší geologickou rezervací na území České republiky. Navzdory tomuto statusu těžba pokračovala až do roku 1914, kdy místní úřady území odkoupily a těžbu definitivně zastavily. Po druhé světové válce byla ochrana tohoto území ještě více posílena (amazingczechia.com). Dnes je Panská skála oblíbeným turistickým cílem, u jejího úpatí se nachází malé jezírko, které vzniklo zaplněním bývalého lomu dešťovou vodou (ceskehory.cz). Panská skála se stala známou i díky českému filmu Pyšná princezna (1952), kde posloužila jako kulisa pro některé scény (kudyznudy.cz).


Odkazy


TOP

Všetky

Objekty, predmety a priestory, TOP, Stavby, Fotografie

Dvere

Hits: 2464

sú pohyblivé panely alebo dosky, ktoré slúžia na uzatváranie vchodu v stene alebo inom priestore. Ich hlavnou funkciou je poskytnúť kontrolu nad prístupom do miestnosti, alebo iného uzavretého priestoru. Dvere môžu mať rôzne formy, veľkosti a štýly, a môžu byť vyrobené z rôznych materiálov, vrátane dreva, kovu, skla alebo plastu. Pre účely tohto príspevku ako dvere označujem drevené, sklenené a plastové dvere. Kovové a kamenné dvere považujem z brány. Dvere sú dôležitým prvkom v architektonickom návrhu a dizajne interiérov a exteriérov. Okrem svojej praktickej funkcie prispievajú aj k celkovej estetike a charakteru miestnosti alebo budovy. Dvere môžu byť navrhnuté tak, aby sa otvárali rôznymi spôsobmi, napríklad otáčaním, posúvaním, sklápaním. Súčasné dvere často obsahujú alebo iné mechanizmy, ktoré umožňujú ich uzamykanie alebo otváranie iba s použitím kľúča, kódu alebo iného oprávnenia. Materiály použité na výrobu dverí môžu ovplyvniť ich vzhľad, bezpečnosť a izolačné vlastnosti. Rôzne druhy dreva, kovové zliatiny, skloplasty a iné materiály sa používajú na výrobu dverí v závislosti od ich účelu a umiestnenia. Existujú rôzne druhy dverí, ktoré slúžia rôznym účelom, ako sú vchodové dvere, interiérové dvere, bezpečnostné dvere, posuvné dvere.


Doors are movable panels or boards designed to close an entrance in a wall or another space. Their primary function is to provide control over access to a room, building, or other enclosed space. Doors can come in various forms, sizes, and styles, and can be made from different materials, including wood, metal, glass, or plastic. For the purpose of this post, I refer to wooden, glass, and plastic doors as doors. I consider metal and stone doors to be gates. Doors are a crucial element in architectural design and the interior and exterior aesthetics of a space. In addition to their practical function, they contribute to the overall look and character of a room or building. Doors can be designed to open in various ways, such as swinging, sliding, or folding. Modern doors often include locks or other mechanisms that allow them to be locked or opened only with a key, code, or other authorization. The materials used to make doors can influence their appearance, safety, and insulation properties. Different types of wood, metal alloys, glass-reinforced plastics, and other materials are used to manufacture doors depending on their purpose and location. There are various types of doors serving different purposes, including entrance doors, interior doors, security doors, sliding doors, and more.


Krajina, Zahraničie, Typ krajiny, Mestá, Mestá, Česko, Fotografie

Chřibská – starodávna, kľukatá

Hits: 2305

Mesto Chřibská leží v najzápadnejšej časti Lužických hôr, v južnej časti Šluknovského výbežku. Je obklopené Kytlickou pahorkatinou, Lužických chrbátom a Jetřichovskými stenami. Na území Chránenej krajinnej oblasti Lužické a CHKO Labské pieskovce a Národného parku České Švajčiarsko. Miestne časti mesta: Chřibská, Dolní Chřibská, Horní Chřibská, Krásne Pole. Žije tu 1399 obyvateľov (mesto-chribska.cz). Prvá písomná zmienka je z roku 1352, avšak mesto existovalo podľa nápisu na kameni, už pre rokom 1144. Nemecký názov je Kreibitz, je slovanského pôvodu zo slova Krzywycza, vyjadruje meandrujúci potok. Súčasný názov je staročeský od slova chřib – pahorok (mesto-chribska.cz). Dominantou je kostol svätého Juraja s farou a krížovou cestou, so štyrmi kaplnkami. Miestne vlastivedné múzeum je venované Chřibskej a jeho rodákovi Tadeášovi Haenkemu (Informačná tabuľa). 

Bola tu najstaršia sklárska huta v Strednej Európe, existovala už v roku 1414 (Alexandr Vanžura). Jej činnosť skončila v roku 2007 (Informačná tabuľa). Po roku 1946 tu dramaticky poklesol počet obyvateľov po odsune Nemcov. Znovuosídlenie nebolo úspešné. Opustené chátrali, boli ničené, aj mnoho z nich bolo zbúraných. Najviac v rokoch 1955, 1965 a 1967. Boli zbúrané súvislé poschodových a prakticky bolo zlikvidované aj námestie. Mnoho cenných ľudových domov. Mnoho týchto stavieb zachránili chalupári, ktorých počet takmer dosahuje počet trvalo žijúcich obyvateľov (mesto-chribska.cz). V mladosti tu žil Christoph Willibald Gluck (1714 – 1787), ktorého otec bol v rokoch 1722 – 1727 lesmajstrom na kamenickom panstve Kinských (Jiří Kühn).

V okolí a priamo v Chřibské rastú tisíce orchideí na podmáčaných lúkach, napr. na lúke u Brodských a v prírodnej rezervácii Marschnerova lúka (Informačné letáky).


The town of Chřibská is located in the westernmost part of the Lusatian Mountains, in the southern part of the Šluknov Hook. It is surrounded by the Kytlice Hills, Lusatian Ridge, and Jetřichovice Walls. The town lies within the Lusatian Mountains Protected Landscape Area, the Elbe Sandstone Protected Landscape Area, and the Bohemian Switzerland National Park. Its local districts are Chřibská, Dolní Chřibská, Horní Chřibská, and Krásné Pole. It has a population of 1,399 inhabitants (mesto-chribska.cz). The first written record dates back to 1352, although, according to an inscription on a stone, the town existed before 1144. The German name is Kreibitz, derived from the Slavic word Krzywycza, meaning a meandering stream. The current name is Old Czech, derived from the word chřib, meaning hill (mesto-chribska.cz). The dominant feature of the town is the Church of St. George, along with its parish and the Stations of the Cross with four chapels. The local history museum is dedicated to Chřibská and its native, Tadeáš Haenke (information board).

Central Europe’s oldest glassworks, established in 1414, operated here (Alexandr Vanžura). It ceased operations in 2007 (information board). After 1946, the population dramatically decreased due to the expulsion of Germans. Resettlement was unsuccessful; abandoned houses decayed, were vandalized, and many were demolished, especially in 1955, 1965, and 1967. Entire rows of multi-story buildings and even the town square were practically destroyed, along with many valuable folk houses. Numerous buildings were saved by weekend residents, whose number almost equals the permanent residents (mesto-chribska.cz). Christoph Willibald Gluck (1714–1787) lived here in his youth. His father served as the forestry manager for the Kinsky estate in Kamenice from 1722 to 1727 (Jiří Kühn).

Thousands of orchids grow in the vicinity and directly in Chřibská, especially in wet meadows such as the Brodský meadow and the Marschnerova louka nature reserve (information leaflets).


Die Stadt Chřibská liegt im westlichsten Teil des Lausitzer Gebirges, im südlichen Teil des Schluckenauer Zipfels. Sie ist umgeben von der Kittlitzer Hügellandschaft, dem Lausitzer Kamm und den Dittersbacher Wänden. Das Gebiet liegt in den Schutzgebieten Lausitzer Gebirge, Elbsandsteingebirge und im Nationalpark Böhmische Schweiz. Stadtteile sind Chřibská, Dolní Chřibská, Horní Chřibská und Krásné Pole. Die Stadt hat 1.399 Einwohner (mesto-chribska.cz). Die erste schriftliche Erwähnung stammt aus dem Jahr 1352, allerdings existierte die Stadt laut einer Inschrift auf einem Stein bereits vor dem Jahr 1144. Der deutsche Name Kreibitz ist slawischen Ursprungs (Krzywycza) und bedeutet „mäandernder Bach“. Der heutige Name ist alttschechisch und stammt vom Wort chřib („Hügel“) ab (mesto-chribska.cz). Dominierend ist die Kirche St. Georg mit Pfarrhaus und Kreuzweg mit vier Kapellen. Das örtliche Heimatmuseum widmet sich Chřibská und seinem berühmten Sohn Tadeáš Haenke (Informationstafel).

Hier befand sich die älteste Glashütte Mitteleuropas, bereits seit 1414 in Betrieb (Alexandr Vanžura). Ihre Tätigkeit wurde 2007 eingestellt (Informationstafel). Nach 1946 sank die Bevölkerungszahl dramatisch durch die Vertreibung der Deutschen. Die Wiederbesiedlung war nicht erfolgreich. Verlassene Häuser verfielen, wurden beschädigt und viele abgerissen, besonders in den Jahren 1955, 1965 und 1967. Ganze Häuserreihen und auch der Stadtplatz wurden weitgehend zerstört, darunter auch viele wertvolle Volksbauten. Viele Gebäude retteten Wochenendhausbesitzer, deren Zahl heute fast die der festen Einwohner erreicht (mesto-chribska.cz). Christoph Willibald Gluck (1714–1787) lebte hier in seiner Jugend. Sein Vater war von 1722 bis 1727 Oberförster auf der Herrschaft der Kinskys in Kamenice (Jiří Kühn).

In der Umgebung und direkt in Chřibská wachsen tausende Orchideen auf feuchten Wiesen, z.B. auf der Brodský-Wiese und im Naturschutzgebiet Marschnerova louka (Informationsblätter).


Miasto Chřibská leży w najbardziej na zachód wysuniętej części Gór Łużyckich, w południowej części Występu Šluknovskiego. Jest otoczone przez Pogórze Kytlickie, Grzbiet Łużycki i Skały Jetřichovickie. Miasto znajduje się na terenie Obszaru Chronionego Krajobrazu Gór Łużyckich, Obszaru Chronionego Krajobrazu Łabskich Piaskowców oraz Parku Narodowego Czeska Szwajcaria. Części miasta to Chřibská, Dolní Chřibská, Horní Chřibská i Krásné Pole. Mieszka tu 1399 osób (mesto-chribska.cz). Pierwsza wzmianka pochodzi z 1352 roku, choć według inskrypcji na kamieniu miasto istniało już przed rokiem 1144. Niemiecka nazwa Kreibitz pochodzi od słowiańskiego Krzywycza i oznacza meandrujący potok. Obecna nazwa pochodzi od staroczeskiego słowa chřib (pagórek) (mesto-chribska.cz). Dominantą jest kościół św. Jerzego z plebanią i drogą krzyżową z czterema kapliczkami. Muzeum regionalne poświęcone jest Chřibskiej i Tadeášowi Haenkemu (tablica informacyjna).

Znajdowała się tu najstarsza huta szkła w Europie Środkowej, działająca już w 1414 roku (Alexandr Vanžura), zamknięta w 2007 roku (tablica informacyjna). Po 1946 dramatycznie zmniejszyła się liczba mieszkańców przez wysiedlenie Niemców. Ponowne zasiedlenie nie powiodło się. Opuszczone domy niszczały, były burzone szczególnie w latach 1955, 1965 i 1967. Uratowali je mieszkańcy sezonowi (mesto-chribska.cz). Młodość spędził tu Christoph Willibald Gluck (1714–1787), którego ojciec zarządzał lasami rodu Kinskich w latach 1722–1727 (Jiří Kühn).

W okolicy i w samym mieście rosną tysiące storczyków na wilgotnych łąkach, np. Brodský i Marschnerova louka (ulotki informacyjne).


Čeština (Česky): Město Chřibská leží v nejzápadnější části Lužických hor, v jižní části Šluknovského výběžku. Je obklopeno Kytlickou pahorkatinou, Lužickým hřbetem a Jetřichovickými stěnami. Nachází se na území Chráněné krajinné oblasti Lužické hory, CHKO Labské pískovce a Národního parku České Švýcarsko. Místní části města jsou Chřibská, Dolní Chřibská, Horní Chřibská a Krásné Pole. Žije zde 1399 obyvatel (mesto-chribska.cz). První písemná zmínka pochází z roku 1352, avšak podle nápisu na kameni existovalo město již před rokem 1144. Německý název Kreibitz má slovanský původ od slova Krzywycza a znamená meandrující potok. Současný název je staročeský, odvozený od slova chřib (pahorek) (mesto-chribska.cz). Dominantou města je kostel svatého Jiří s farou a křížovou cestou se čtyřmi kaplemi. Místní vlastivědné muzeum je věnováno Chřibské a zdejšímu rodákovi Tadeáši Haenkemu (informační tabule).

Byla zde nejstarší sklářská huť ve střední Evropě, založená již roku 1414 (Alexandr Vanžura). Svoji činnost ukončila v roce 2007 (informační tabule). Po roce 1946 zde dramaticky poklesl počet obyvatel kvůli odsunu Němců. Znovuosídlení nebylo úspěšné; opuštěné domy chátraly, byly ničeny a mnoho z nich bylo zbořeno, zejména v letech 1955, 1965 a 1967. Byly zbořeny celé řady patrových domů a prakticky bylo zlikvidováno i náměstí, včetně mnoha cenných lidových staveb. Mnohé objekty zachránili chalupáři, jejichž počet téměř dosahuje počtu trvale žijících obyvatel (mesto-chribska.cz). V mládí zde žil Christoph Willibald Gluck (1714–1787), jehož otec byl v letech 1722–1727 lesmistrem na kamenickém panství Kinských (Jiří Kühn).

V okolí a přímo v Chřibské rostou tisíce orchidejí na podmáčených loukách, například na louce u Brodských a v přírodní rezervaci Marschnerova louka (informační letáky).


Príroda, Rastliny, Akvaristika, Organizmy, Fotografie

Riasy a sinice

Hits: 25753

Chcel by som zdôrazniť, že riasy sú rastliny. Nepatria medzi vyššie Magnoliophyta ako väčšina dostupných vodných rastlín, ale medzi nižšie rastliny Algae – riasy. Riasy do , snažiť sa zabrániť, aby sme ich v akváriu vôbec nemali je nerovný boj a v konečnom dôsledku aj zbytočný. Akvárium absolútne bez rias pôsobí neprirodzene až sterilne.

Riasy úzko súvisia s množstvom svetla. Optimálne svetelné podmienky nie je vôbec ľahké pre náš konkrétny prípad zabezpečiť. Za najdôležitejšie považujem dosiahnuť optimálny vyšších rastlín. V takom prípade si vyššie rastliny poradia s konkurenčne slabším protivníkom. Riasy však dokážu reagovať na zmeny oveľa rýchlejšie ako vyššie rastliny. Ak máte rastlinné akvárium, odporúčam pokryť voľné dno rastlinami na viac ako 75 %. V takom prípade dokážu vodné rastliny účinne spracovať aj väčšie množstvo svetla a živín. Dokážu do istej miery kompenzovať aj vyššie prísuny energie.

Riasy sa najčastejšie likvidujú mechanicky. Odporúčam drsnú hubku na riad, alebo mäkkú drôtenku. Žiletku, magnetickú škrabku neodporúčam, avšak aj v prípade hubky, či drôtenky, dajme pozor na to, aby sa nám pri čistení nedostali pod ruky kúsky štrku, ktoré účinné vedia sklo poškriabať. Najmä na čelnom skle je to nepríjemne.

Biologickým prostriedkom proti riasam, sú napr. slimáky. Ale aj niektoré konzumujú riasy. Najmä Poecilia sphenops, Xiphophorus helleri, Gyrinocheilus aymonieri, Crossocheilus siamensis, Otocinclus, Epalzeorhynchus, Labeo, Helostoma temmincki, Ancistrus atď. Z kreviet najmä Caridina japonica, Neocaritida denticulata. Treba prihliadať na to, že pre niektoré tieto organizmy je riasa prirodzenou potravou, ale častokrát ak majú dostatok inej potravy, dávajú prednosť práve jej. Čiernu riasu žerie spoľahlivo len prísavka thajská – Gyrinocheilus aymonieri a krevetka Caridina japonica. V prírode mikroskopické riasy konzumujú malé kôrovce – cyklopy, vírniky, dafnie. Spoliehať sa na biologické prostriedky v prípade vyššieho výskytu rias je naivné. Vtedy si treba vyhrnúť radšej rukávy a pustiť sa do práce. 

Riasy možno účinne odstrániť pôsobením ultrafialového žiarenia. V akvaristických obchodoch je možné zakúpiť UV-lampu, prípadne si ju viete vyrobiť. Funguje na princípe pôsobenie UV žiarenia na vodu, ktorá prechádza trubkou, v ktorej je poháňaná filtrom, teoreticky nejakým čerpadlom. Voda pri prechode je vystavovaná žiareniu, ktoré svojimi účinkami zabíja zárodky rias, samozrejme aj choroboplodných zárodky. Lampa pôsobí na vodu prechádzajúcu do akvária a tým chráni vodu od rias. V prípade zákalu je možné použiť aj priame pôsobenie priameho svetla lampy na vodu – avšak v takom prípade je nutné chrániť si oči a nemať v nádrži ryby ani rastliny.

Rias sa dá zbaviť aj chemickou cestou, prostriedkami, ktoré zakúpite v akvaristických obchodoch, prípadne na akvaristických burzách. Niektoré sú založené na medi ktorá nie je práve vhodná pre niektoré druhy, napr. sumčeky. Odporúčam použiť produkty od EasyLife, prípadne Seachem. Napr. AlgExit. Čiastočne sa dá použiť aj účinné hnojivo Carbo, ktoré ak aplikujeme párkrát priamo na problematický chumáč riasy, tak dokáže časom zlikvidovať aj odolné riasy.

Prúdenie vplýva aj na riasy. Známej čiernej štetinkovej riase, ktorá patrí medzi červené rias, sa darí pri silnom prúdení, často ju nájdeme v najmä na filtri, pri jeho výpuste. Pri nadbytku svetla a živín vznikajú zelené a červené riasy. Hnedé riasy sa vyskytujú v akváriach výnimočne pri nedostatku svetla. Napr. v pôrodničkách, prípadne v prípade ak akvarista nesvieti dostatočne, predovšetkým dostatočne dlhú dobu.

Ako osvedčený nástroj aj proti štetinkovej riase možno označiť aj použitie Sava. Savo samozrejme ničí všetky riasy. Savo zriedime v pomere 1:20. Jemnolisté rastliny znesú 2-3 minúty, väčšina rastlín 3 minúty, rastliny s tuhšími listami ako Anubias, Echinodorus, Crypotocoryne 3-4 minúty. Stačí ich ponoriť do pripraveného roztoku a následne poriadne prepláchnuť vo vode. Samozrejme aplikujte tento postup mimo akvária, napr. v kýbli. Takto môžeme zbaviť rias aj štrk, apod., ostane doslova vybielený.


Algae

I would like to emphasize that algae are plants. They do not belong to higher plants – Magnoliophyta like most available aquatic plants, but rather to lower plants Algae – algae. Algae are part of the aquarium, trying to prevent them from being in the aquarium at all is an uneven battle and ultimately unnecessary. An aquarium without algae looks unnaturally sterile.

Algae are closely related to the amount of light. It is not easy at all to ensure optimal lighting conditions for our specific case. I consider it most important to achieve optimal growth of higher plants. In this case, higher plants can cope with a competitively weaker opponent. However, algae can react to changes much faster than higher plants. If you have a planted aquarium, I recommend covering the open bottom with plants by more than 75%. In that case, aquatic plants can effectively process even larger amounts of light and nutrients. They can to some extent compensate for higher energy inputs as well.

Algae are most commonly eliminated mechanically. I recommend a rough sponge for dishes or a soft wire. I do not recommend a razor blade, magnetic scraper, but even with a sponge or wire, be careful not to accidentally scratch the glass with gravel pieces during cleaning, especially on the front glass, it is unpleasant.

Biological means against algae include, for example, snails. But some fish also consume algae. Especially Poecilia sphenops, Xiphophorus helleri, Gyrinocheilus aymonieri, Crossocheilus siamensis, Otocinclus, Epalzeorhynchus, Labeo, Helostoma temmincki, Ancistrus, etc. Of shrimp, especially Caridina japonica, Neocaritida denticulata. It is important to note that for some of these organisms, algae are a natural food, but often, if they have enough other food, they prefer it. Black algae are reliably eaten only by the Chinese algae eater – Gyrinocheilus aymonieri and shrimp Caridina japonica. In nature, microscopic algae are consumed by small crustaceans – cyclops, rotifers, daphnia. Relying on biological means in case of higher algae occurrence is naive. In that case, it’s better to roll up your sleeves and get to work.

Algae can be effectively removed by the action of ultraviolet radiation. UV lamps can be purchased in pet stores, or you can make them yourself. It works on the principle of UV radiation acting on water passing through a tube, in which water is propelled by a filter, theoretically by some pump. The water passing through is exposed to radiation, which kills algae spores, of course, as well as pathogenic spores. The lamp acts on the water passing into the aquarium, thus protecting the water from algae. In the case of turbidity, direct exposure of the lamp’s light to the water can be used – but in that case, it is necessary to protect the eyes and not have fish or plants in the tank.

Algae can also be removed chemically, using products available in pet stores or at pet fairs. Some are based on copper, which is not suitable for some species, e.g., catfish. I recommend using products from EasyLife or Seachem. For example, AlgExit. Partially, effective fertilizer Carbo can be used, which if applied a few times directly to the problematic bunch of algae, can eventually kill even resistant algae.

Water flow also affects algae. The well-known black bristle algae, which belongs to red algae, thrives in strong flow, often found mainly on the filter, at its outlet. With an excess of light and nutrients, green and red algae are created. Brown algae occur in aquariums exceptionally in case of insufficient light. For example, in breeding tanks, or in case the aquarist does not shine enough, especially for a long time.

As a proven tool against bristle algae, the use of bleach can also be mentioned. Bleach naturally destroys all algae. Dilute the bleach at a ratio of 1:20. Fine-leaved plants tolerate 2-3 minutes, most plants 3 minutes, plants with tougher leaves like Anubias, Echinodorus, Cryptocoryne 3-4 minutes. Just immerse them in the prepared solution and then rinse thoroughly in water. Of course, apply this procedure outside the aquarium, e.g., in a bucket. This way, we can also get rid of algae, gravel, stones, etc., which will literally be bleached.


Algen

Ich möchte betonen, dass Algen Pflanzen sind. Sie gehören nicht zu den höheren Pflanzen – Magnoliophyta wie die meisten verfügbaren Wasserpflanzen, sondern zu den niederen Pflanzen Algen – Algen. Algen gehören zum Aquarium, zu versuchen, sie überhaupt nicht im Aquarium zu haben, ist ein ungleicher Kampf und letztendlich unnötig. Ein Aquarium ohne Algen sieht unnatürlich steril aus.

Algen hängen eng mit der Lichtmenge zusammen. Es ist überhaupt nicht einfach, für unseren spezifischen Fall optimale Lichtverhältnisse sicherzustellen. Ich halte es für am wichtigsten, ein optimales Wachstum höherer Pflanzen zu erreichen. In diesem Fall können sich höhere Pflanzen mit einem konkurrenzschwächeren Gegner behaupten. Algen können jedoch auf Veränderungen viel schneller reagieren als höhere Pflanzen. Wenn Sie ein bepflanztes Aquarium haben, empfehle ich, den offenen Boden mit Pflanzen zu mehr als 75% zu bedecken. In diesem Fall können Wasserpflanzen auch größere Licht- und Nährstoffmengen effektiv verarbeiten. Sie können auch höhere Energiezufuhren teilweise kompensieren.

Algen werden am häufigsten mechanisch beseitigt. Ich empfehle einen groben Schwamm für Geschirr oder einen weichen Draht. Ich empfehle keine Rasierklinge, keinen magnetischen Schaber, aber auch bei einem Schwamm oder Draht sollten Sie darauf achten, dass Sie beim Reinigen keine Glasscherben versehentlich mit Kiesstücken zerkratzen, insbesondere am Vorderglas, das ist unangenehm.

Biologische Mittel gegen Algen umfassen zum Beispiel Schnecken. Aber auch einige Fische fressen Algen. Besonders Poecilia sphenops, Xiphophorus helleri, Gyrinocheilus aymonieri, Crossocheilus siamensis, Otocinclus, Epalzeorhynchus, Labeo, Helostoma temmincki, Ancistrus usw. Von Garnelen, insbesondere Caridina japonica, Neocaritida denticulata. Es ist wichtig zu beachten, dass Algen für einige dieser Organismen eine natürliche Nahrung sind, aber oft, wenn sie genug andere Nahrung haben, bevorzugen sie es. Schwarze Algen werden nur von der chinesischen Algenfresser – Gyrinocheilus aymonieri und der Garnele Caridina japonica zuverlässig gefressen. In der Natur werden mikroskopische Algen von kleinen Krebstieren – Cyclops, Rädertierchen, Daphnien – konsumiert. Sich auf biologische Mittel im Falle eines höheren Algenauftretens zu verlassen, ist naiv. In diesem Fall ist es besser, die Ärmel hochzukrempeln und anzufangen zu arbeiten.

Algen können durch die Wirkung ultravioletter Strahlung wirksam entfernt werden. UV-Lampen können in Zoohandlungen gekauft oder selbst hergestellt werden. Es funktioniert nach dem Prinzip, dass UV-Strahlung auf Wasser wirkt, das durch einen Schlauch fließt, in dem Wasser von einem Filter angetrieben wird, theoretisch von einer Pumpe. Das Wasser, das durchfließt, ist der Strahlung ausgesetzt, die Algensporen abtötet, natürlich auch pathogene Sporen. Die Lampe wirkt auf das in das Aquarium einlaufende Wasser und schützt so das Wasser vor Algen. Im Falle von Trübungen kann die direkte Einwirkung des Lampenlichts auf das Wasser verwendet werden – aber in diesem Fall ist es notwendig, die Augen zu schützen und keine Fische oder Pflanzen im Tank zu haben.

Algen können auch chemisch entfernt werden, indem Produkte verwendet werden, die in Zoohandlungen oder auf Tiermessen erhältlich sind. Einige basieren auf Kupfer, das für einige Arten nicht geeignet ist, z. B. Welse. Ich empfehle die Verwendung von Produkten von EasyLife oder Seachem. Zum Beispiel AlgExit. Teilweise kann das wirksame Düngemittel Carbo verwendet werden, das, wenn es einige Male direkt auf den problematischen Algenbüschel aufgetragen wird, schließlich auch widerstandsfähige Algen abtöten kann.

Die Wasserströmung beeinflusst auch Algen. Die bekannten schwarzen Borstenalgen, die zu den roten Algen gehören, gedeihen bei starkem Strömung, oft finden sie sich hauptsächlich am Filter, an dessen Auslass. Bei einem Überschuss an Licht und Nährstoffen entstehen grüne und rote Algen. Braune Algen treten im Aquarium nur in Ausnahmefällen bei unzureichendem Licht auf. Zum Beispiel in Zuchttanks oder wenn der Aquarianer nicht genug leuchtet, insbesondere nicht lange genug.

Als bewährtes Mittel gegen Borstenalgen kann auch die Verwendung von Bleichmittel erwähnt werden. Bleichmittel zerstört natürlich alle Algen. Verdünnen Sie das Bleichmittel im Verhältnis 1:20. Feinblättrige Pflanzen vertragen 2-3 Minuten, die meisten Pflanzen 3 Minuten, Pflanzen mit härteren Blättern wie Anubias, Echinodorus, Cryptocoryne 3-4 Minuten. Tauchen Sie sie einfach in die vorbereitete Lösung ein und spülen Sie sie dann gründlich in Wasser ab. Wenden Sie dieses Verfahren natürlich außerhalb des Aquariums an, z. B. in einem Eimer. Auf diese Weise können wir auch Algen, Kies, Steine usw. loswerden, die buchstäblich gebleicht werden.


Zelené riasy

Najznámejšie sú zelené riasyChlorophyta a červené riasy Rhodophyta. Sú však napr.aj hnedé riasyPhaephyceae, rozsievkyBacillariophyceae. Medzi známe druhy patrí Chlorella – jednobunková riasa schopná do zelena totálne “ zafarbiť“ celú nádrž. V akvaristike sa preto používa termín zelený zákal, všeobecne sa používa termín vodný kvet. Medzi červené riasy patrí napr. Audouinella. Riasy sú rovnako ako vyššie rastliny asimilátory hmoty, obdobným spôsobom viažu , a tvoria organickú hmotu a ako vedľajší produkt kyslík.

Tzv. vodný kvet najmä v eutrofizovaných jazerách a nádržiach tvoria často mikroskopické druhy Chlorella pyrenoidosa, Volvox aureus.  V prípade zeleného zákalu pomôžu bežné prostriedky ako výmena vody, odkalenie, ale predovšetkým totálne zatemnenie na nejaký . Po tomto neestetickom čine je vhodné opäť vymeniť väčšie množstvo vody. Iným častým typom je dlhá vláknitá zelená riasa napr. Pithophora, Oedogonium, Cladophora, ktorá sa pomerne ťažko odstraňuje. Azda najúčinnejšou metódou je mechanické namotanie na špajdlu, alebo podobný nástroj. Žerú ju však živorodky, Ancistrus, Crossocheilus siamensis, Gyrinocheilus aymonieri apod. Na rozdiel od štetinkovej riasy nie je tak pevne ukotvená v rastlinách, preto pri odtŕhaní dochádza ku poškodeniu rastlín len zriedkavo. Na vlasovú riasu je možné aplikovať aj kúpeľ Sava. Riasy, tvoriace malé kolónie, podobne ako hnedé riasy na listoch sú napr. Draparnaldia, Tetraspora gelatinosa, Hydrodictyon reticulatum, Euglena. Dajú sa pomerne ťažko zo skla.


Green Algae

The most well-known are green algae – Chlorophyta and red algae – Rhodophyta. However, there are also brown algae – Phaeophyceae, diatoms – Bacillariophyceae, for example. Among the well-known species is Chlorella – a single-celled algae capable of completely „coloring“ the entire tank green. In aquarium keeping, the term „green water“ is used, while the general term „water bloom“ is also commonly used. Among the red algae is, for example, Audouinella. Algae, like higher plants, are assimilators of matter, bind light in a similar way, and produce organic matter and oxygen as a by-product.

The so-called water bloom, especially in eutrophic lakes and reservoirs, is often formed by microscopic species such as Chlorella pyrenoidosa, Volvox aureus. In the case of green water, common methods such as water changes, sedimentation, but especially total tank blackout for some time, can help. After this unaesthetic procedure, it is advisable to again replace a large amount of water. Another common type is the long filamentous green algae such as Pithophora, Oedogonium, Cladophora, which are relatively difficult to remove. Perhaps the most effective method is mechanical winding on a spindle or similar tool. However, they are eaten by livebearers, Ancistrus, Crossocheilus siamensis, Gyrinocheilus aymonieri, etc. Unlike brush algae, it is not so firmly anchored in the plants, so damage to the plants rarely occurs when removed. Savo bath can also be applied to hair algae. Algae forming small colonies, similar to brown algae on leaves, include Draparnaldia, Tetraspora gelatinosa, Hydrodictyon reticulatum, Euglena. They can be quite difficult to remove from glass.


Grüne Algen

Die bekanntesten sind grüne Algen – Chlorophyta und rote Algen – Rhodophyta. Es gibt jedoch auch braune Algen – Phaeophyceae, Kieselalgen – Bacillariophyceae, zum Beispiel. Zu den bekannten Arten gehört Chlorella – eine einzellige Alge, die in der Lage ist, das gesamte Aquarium grün zu färben. In der Aquaristik wird der Begriff „grünes Wasser“ verwendet, während auch der allgemeine Begriff „Wasserblüte“ üblich ist. Zu den roten Algen gehört zum Beispiel Audouinella. Algen sind wie höhere Pflanzen Assimilatoren von Materie, binden Licht auf ähnliche Weise und produzieren organische Materie und Sauerstoff als Nebenprodukt.

Die sogenannte Wasserblüte, insbesondere in eutrophen Seen und Stauseen, wird oft von mikroskopischen Arten wie Chlorella pyrenoidosa, Volvox aureus gebildet. Im Falle von grünem Wasser können übliche Methoden wie Wasserwechsel, Sedimentation, aber vor allem eine totale Verdunkelung des Tanks für einige Zeit helfen. Nach diesem wenig ästhetischen Verfahren ist es ratsam, wieder eine große Menge Wasser zu wechseln. Ein weiterer häufiger Typ sind die langen fadenförmigen grünen Algen wie Pithophora, Oedogonium, Cladophora, die relativ schwer zu entfernen sind. Vielleicht ist die effektivste Methode das mechanische Aufwickeln auf einer Spindel oder einem ähnlichen Werkzeug. Sie werden jedoch von Lebendgebärenden, Ancistrus, Crossocheilus siamensis, Gyrinocheilus aymonieri usw. gefressen. Im Gegensatz zu Bürstenalgen ist es nicht so fest in den Pflanzen verankert, sodass Schäden an den Pflanzen selten auftreten, wenn es entfernt wird. Ein Savo-Bad kann auch auf Haaralgen aufgetragen werden. Algen, die kleine Kolonien bilden, ähnlich den braunen Algen auf Blättern, sind Draparnaldia, Tetraspora gelatinosa, Hydrodictyon reticulatum, Euglena. Sie können ziemlich schwierig von Glas zu entfernen sein.


Červené riasy

Medzi červené riasy – Rhodophyta patrí už spomínaná štetinková riasa, ktorá vie byť nevítaným hosťom. Často je nazývaná aj ako čierna riasa. Vyznačuje sa chromatickou adaptáciou – svoje fotosyntetické pigmenty (sfarbenie) mení vzhľadom na momentálne svetelné podmienky. Do nádrže obyčajne infiltruje prinesenými rastlinami, vodou z inej nádrže, slimákmi, alebo aj rybami. K prenosu riasy vodou z inej nádrže môže dôjsť veľmi nevinne – riasu prenesie náhodou. Na „úspešnú“ introdukciu postačia zárodky riasy. Živnou pôdou sú pre riasy najmä staršie vyšších rastlín.

Taxonomicky ide o viaceré druhy napr. Audouinella, Compsopogon, Batrachospermum moniliforme, Lemanea. Skúsenosti akvaristov s ňou sú rôzne. Všeobecne sa aj červeným riasam a rovnako „čiernej riase“, darí pri prebytku živín. Napr. v letnom období sa často vyskytuje veľmi hojne, od septembra začne postupne miznúť v akváriu. Jej rast ovplyvňuje množstvo denného svetla. Darí sa jej na príliš bohatom dne. Táto riasa je obyčajne čierna, jej farba môže byť však aj tmavomodrá, tmavozelená. Prichytáva sa prakticky na všetko, na rastliny, na substrát, na schránky slimákov, na sklo akvária, narúša lep na okrajoch stien apod. Drží veľmi pevne, mechanicky je veľmi problematické ju likvidovať z povrchu rastlín. Obyčajne pri takomto pokuse odtrhneme aj kus z rastliny. Z vlastnej skúsenosti viem, že je ťažké odstrániť ju aj cirokovou kefou z tvrdého kameňa.

Čiernej riasy sa dá zbaviť aj prirodzenejšou cestou. V prvom rade treba znížiť príjem živín. Jestvuje na to niekoľko možností – napr. odkaliť častejšie dno, častejšie meniť vodu, prípadne zvýšiť jej množstvo pri výmene, menej kŕmiť, menej svietiť, premiestniť akvárium na tmavšie miesto.


Red Algae

Among the red algae – Rhodophyta, the previously mentioned brush algae can be an unwelcome guest. It is often also referred to as black algae. It is characterized by chromatic adaptation – it changes its photosynthetic pigments (color) depending on the current light conditions. It usually infiltrates through imported plants, water from another tank, snails, or even fish. The transfer of algae with water from another tank can occur very innocently – the algae is accidentally transferred. Spores of algae are sufficient for a „successful“ introduction. The main source of nutrition for algae is primarily older leaves of higher plants.

Taxonomically, it is several species such as Audouinella, Compsopogon, Batrachospermum moniliforme, Lemanea. Aquarists‘ experiences with it vary. Generally, red algae and also „black algae“ thrive in nutrient excess. For example, they often occur very frequently in the summer and gradually begin to disappear from the aquarium from September. Their growth is influenced by daylight. They thrive in too much light. This algae is usually black, but its color can also be dark blue or dark green. It adheres practically everywhere, to plants, to the substrate, to the shells of snails, to the aquarium glass, it disrupts the film on the walls, etc. It holds very firmly, and it is mechanically very problematic to remove it from the surface of the plants. Usually, when trying to remove it, we also tear off a part of the plant. From personal experience, I know that it is difficult to remove it even with a wire brush from hard stone.

Black algae can also be fought in a more natural way. First and foremost, the nutrient intake should be reduced. There are several options for this – for example, removing sediment more frequently, changing the water more often, possibly increasing the amount during a change, feeding less, providing less light, moving the aquarium to a darker place.


Rote Algen

Zu den roten Algen – Rhodophyta gehört die bereits erwähnte Pinselalge, die ein unerwünschter Gast sein kann. Sie wird oft auch als Schwarze Alge bezeichnet. Sie zeichnet sich durch chromatische Anpassung aus – sie ändert ihre fotosynthetischen Pigmente (Farbe) je nach den aktuellen Lichtverhältnissen. Sie dringt normalerweise durch importierte Pflanzen, Wasser aus einem anderen Tank, Schnecken oder auch Fische in den Tank ein. Die Übertragung der Alge mit Wasser aus einem anderen Tank kann sehr unschuldig erfolgen – die Alge wird versehentlich übertragen. Zur „erfolgreichen“ Einführung reichen die Algensporen aus. Die Hauptnahrungsquelle für Algen sind vor allem ältere Blätter höherer Pflanzen.

Taxonomisch handelt es sich um mehrere Arten wie Audouinella, Compsopogon, Batrachospermum moniliforme, Lemanea. Die Erfahrungen der Aquarianer damit sind unterschiedlich. Im Allgemeinen gedeihen rote Algen und auch „schwarze Algen“ bei Nährstoffüberschuss. Zum Beispiel treten sie im Sommer oft sehr häufig auf und beginnen ab September allmählich im Aquarium zu verschwinden. Ihr Wachstum wird vom Tageslicht beeinflusst. Sie gedeiht bei zu viel Licht. Diese Alge ist normalerweise schwarz, ihre Farbe kann jedoch auch dunkelblau oder dunkelgrün sein. Sie haftet praktisch überall, an Pflanzen, am Substrat, an den Gehäusen von Schnecken, am Aquariumglas, sie stört den Film an den Wänden usw. Sie hält sehr fest, es ist mechanisch sehr problematisch, sie von der Oberfläche der Pflanzen zu entfernen. In der Regel reißen wir beim Versuch, sie zu entfernen, auch einen Teil der Pflanze ab. Aus eigener Erfahrung weiß ich, dass es schwierig ist, sie selbst mit einer Drahtbürste vom harten Stein zu entfernen.

Schwarze Algen können auch auf natürlichere Weise bekämpft werden. Zunächst sollte die Nährstoffzufuhr reduziert werden. Es gibt mehrere Möglichkeiten dafür – zum Beispiel das Sediment häufiger entfernen, das Wasser häufiger wechseln, gegebenenfalls die Menge bei einem Wechsel erhöhen, weniger füttern, weniger Licht geben, das Aquarium an einen dunkleren Ort verschieben.

Hnedé riasy

Hnedé riasy – vyžadujú iné podmienky ako zelené a červené riasy. Medzi tento typ rias akvaristi zaraďujú aj rozsievky Bacillariophyceae (Diatomae). Hnedá riasa vzniká pomerne často po založení nádrže. Jej stav sa obyčajne rýchlo zredukuje a obyčajne pozvoľne zmizne. Ak je však stav trvalý, zrejme sme nášmu akváriu neposkytli dostatok svetla. Hnedé riasy sa uchycujú najmä na stenách nádrže, môžeme ich však registrovať aj na povrchu rastlín. Riešenie tejto situácie je preto veľmi prosté. Zvýšením množstva svetla. Niektoré druhy: Stephanodiscus bellus, Gomphonema geminatum, Hydrurus foetidus, Tabellaria ventricosa, Cymbella cistula.


Brown Algae

Brown algae – require different conditions than green and red algae. Among this type of algae, aquarists also include diatoms – Bacillariophyceae (Diatomae). Brown algae often appear shortly after the tank is set up. Their presence usually diminishes quickly and gradually disappears. However, if the presence is persistent, it is likely that our aquarium has not been provided with enough light. Brown algae mainly attach to the walls of the tank, but they can also be found on the surface of plants. Therefore, the solution to this situation is very simple: increasing the amount of light. Some species include: Stephanodiscus bellus, Gomphonema geminatum, Hydrurus foetidus, Tabellaria ventricosa, Cymbella cistula.


Braune Algen

Braune Algen – erfordern andere Bedingungen als grüne und rote Algen. Zu diesem Algentyp gehören auch Kieselalgen – Bacillariophyceae (Diatomae). Braune Algen treten oft kurz nach der Einrichtung des Aquariums auf. Ihre Präsenz nimmt in der Regel schnell ab und verschwindet allmählich. Wenn ihr Auftreten jedoch anhält, liegt es wahrscheinlich daran, dass unser Aquarium nicht genügend Licht erhält. Braune Algen haften hauptsächlich an den Wänden des Tanks, können aber auch auf der Oberfläche von Pflanzen vorkommen. Daher ist die Lösung für diese Situation sehr einfach: Erhöhung der Lichtmenge. Einige Arten sind: Stephanodiscus bellus, Gomphonema geminatum, Hydrurus foetidus, Tabellaria ventricosa, Cymbella cistula.


Sinice

Sinice nepatria medzi rastliny (riasy), ale často sa medzi ne zaraďujú. Často sú označované za modrozelené riasy. Sú obyčajne naozaj modrozelené, čo spôsobuje farbivo fykocyanín, ale môžu byť aj hnedočierne. Riasy a vyššie rastliny patria medzi eukaryotické organizmy. Sinice sú prokaryotické organizmy na rozdiel od rias, rastlín a živočíchov. Sú príbuzné baktériám. Ich produkty metabolizmu sú škodlivé pre ryby, pri vysokej koncentrácii aj pre človeka – spomeňme si napr. na zákaz kúpania na Kuchajde v Bratislave, ale aj na iných vodných plochách. Sú často mazľavej konzistencie, vyskytujú sa pri vysokej koncentrácii dusíka a fosforu. Sinice sú veľmi odolný protivník, platia pre ne rovnaké postupy, ak ich chceme eliminovať, ako v prípade rias. Niektoré druhy: Aphanizomenon gracile, Rivularia haematites, Anabaena flos-aquae, Mycrocystis auruginosa, Oscillatoria limosa. Nie je jednoduché sa ich zbaviť, odporúčam použiť produkty od EasyLife, Seachem apod. Zaujímavosťou je, že sú jedny z mála skupín rýb, ktoré požierajú aj sinice.


Algae

Algae do not belong to plants (seaweed), but they are often classified among them. They are often referred to as blue-green algae. They are usually truly blue-green, which is caused by the pigment phycocyanin, but they can also be brown-black. Algae and higher plants belong to eukaryotic organisms. Algae are prokaryotic organisms unlike seaweed, plants, and animals. They are related to bacteria. Their metabolic products are harmful to fish, and at high concentrations, also to humans – let’s remember, for example, the ban on swimming in Kuchajda in , but also in other bodies of water. They are often slimy in consistency and occur at high concentrations of nitrogen and phosphorus. Algae are very resilient opponents, the same procedures apply to eliminate them as in the case of seaweed. Some species: Aphanizomenon gracile, Rivularia haematites, Anabaena flos-aquae, Mycrocystis auruginosa, Oscillatoria limosa. It is not easy to get rid of them; I recommend using products from EasyLife, Seachem, etc. Interestingly, Malawi cichlids are one of the few groups of fish that consume algae.


Algen

Algen gehören nicht zu den Pflanzen (Algen), werden aber oft zu ihnen gezählt. Sie werden oft als Blaualgen bezeichnet. Sie sind normalerweise wirklich blau-grün, was durch das Pigment Phycocyanin verursacht wird, können aber auch braun-schwarz sein. Algen und höhere Pflanzen gehören zu den eukaryotischen Organismen. Algen sind prokaryotische Organismen im Gegensatz zu Algen, Pflanzen und Tieren. Sie sind mit Bakterien verwandt. Ihre Stoffwechselprodukte sind für Fische schädlich und bei hoher Konzentration auch für Menschen – erinnern wir uns beispielsweise an das Badeverbot in Kuchajda in Bratislava, aber auch in anderen Gewässern. Sie sind oft schleimig in der Konsistenz und treten bei hoher Konzentration von Stickstoff und Phosphor auf. Algen sind sehr widerstandsfähige Gegner, die gleichen Verfahren gelten für ihre Beseitigung wie im Fall von Algen. Einige Arten: Aphanizomenon gracile, Rivularia haematites, Anabaena flos-aquae, Mycrocystis auruginosa, Oscillatoria limosa. Es ist nicht einfach, sie loszuwerden; Ich empfehle die Verwendung von Produkten von EasyLife, Seachem usw. Interessanterweise sind Malawiseebuntbarsche eine der wenigen Fischgruppen, die Algen konsumieren.

Akvaristika

Údržba akvária

Hits: 36082

Keď sme si zaobstarali akvárium, je treba sa oňho starať. Nie je to komplet, ktorý sa raz pripraví a potom existuje sám. Každé akvárium potrebuje od človeka určité vstupy – energiu, ktorú je nutné vynaložiť na zachovanie života v ňom. Niektoré zásahy sú nutné z hľadiska funkcie, niektoré sú viac-menej estetické. Medzi vybavenie na údržbu by som zaradil: sieťky, hadice, hadičky, drôtenku, odkaľovací zvon, vedrá, nožnice. Vodu je treba z času načas vymeniť. Akvárium totiž nedokáže zabezpečiť celý kolobeh látok, niektoré musia byť z neho odoberané, iné pridávané. Nie je tomu ako v prírode, kde je vo vodných tokoch, jazerách a moriach neustály prietok, ktorý prináša nové živiny, a spracované odnáša. Existujú síce aj prietokové komplexy, ale nie sú bežné a nedosahujú samozrejme prirodzené rozmery. V takom prípade môžeme hovoriť o eliminácii pravidelných výmen . Dá sa to nazvať kontinuálnou výmenou vody. Vráťme sa však do bežného stavu. Ako často treba vymieňať a aké množstvo závisí od veľmi veľa faktorov. Ak mám na mysli bežné akvárium radové akvaristu, bežná výmena by nemala presiahnuť tretinu objemu . sa vymieňa za vodu čistú, prípadne upravenú – napr. osmózou. V prípade ak vám voda pení, voda je špinavá alebo organicky silne znečistená. Čistá voda nepení. Penenie sa môže až pri filtrácii.

Farba vody v akváriu by mala byť hnedožltá až zelená. Aj číra priezračná čistá voda je niekedy znakom vysokého obsahu škodlivých dusitanov. Sklo sa vplyvom osvetlenia a denného svetla zariasi. Je možné, že vám ho prísavníky, slimáky „čistia“, napriek tomu je sklá nutné očistiť. Napr. drsnejšou hubkou na riad, bankomatovou kartou alebo mäkkou drôtenkou. Vždy dajme dozor nato, aby sa nám do týchto nástrojov nedostal substrát z dna. Pretože aj malé zrnko štrku dokáže účinne doškrabať sklo. Magnetickú škrabka a žiletka majú nevýhodou v tom, že sklo ľahko doškriabu. Vodný kameň sa ľahko odstráni mäkká drôtenka. Ak chceme a môžeme použiť chémiu, tak sa hodí kyselina fosforečná prípadne ocot. Silnejšie kyseliny sú príliš silné pre naše ruky. Napr. pomocou handričky. Aj vtedy pomôže abrazívna drôtenka. Krycie sklo sa rovnako ľahko čistí drôtenkou. Čelné sklo spredu odporúčam čistiť čistou vodou dvoma handrami – jednou na mokré a druhovu na suché čistenie – leštenie.

Vnútorné filtre je potrebné čistiť pomerne často. Ako často, závisí od mnohých faktorov. Každý akvarista sa musí naučiť odhadnúť správny , ale dá sa povedať, že priemerná doba by v normálnom spoločenskom akváriu, ktoré nie je prerybnené mohla, činiť 1 týždeň. V prípade, že filter nasal do seba toľko častíc, že je doslova nasatý na trubku v ňom, je ho treba ihneď vyčistiť. Pozor, pretože filter dokážu upchať aj vežovky malajské. Raz za čas je nutné vyčistiť aj lopatky čerpadla, celé zariadenie filtra premyť pod vodou, vykefovať, vyrajbať jednotlivé časti. Filtračný molitan vnútorného filtra je lepšie neumývať pod tečúcou vodou vodovodnej siete, ale vo vode, ktorú predtým zlejem z nádrže. Vodovodná voda by mohla ublížiť baktériám, ktoré sú v molitane. Pokiaľ umyjeme filtračnú náplň vodou z , prípadne vodou neobsahujúcou nežiaduce plyny, zachováme filter funkčný. V inom prípade sa baktérie v ňom zdecimujú. Pokiaľ dávate do akvária nový molitan, trochu ho zašpiňte pomocou inej vložky z už zabehaného filtra, alebo ho aspoň napustite vodou zo staršieho akvária. V prípade vonkajšieho filtra stačí filtračný molitan menej často. Na začiatku častejšie, neskôr občas. Rovnako aj filtračnú vatu a ostatné časti filtra. Vonkajší filter je výhodný z hľadiska údržby, po jeho zakúpení je nutné sa oň viac starať, ale nie sú ojedinelé prípady, kedy akvarista čistil molitan po roku a všetko bolo v poriadku. Optimálna veľkosť všetkých filtrov a ich zložiek závisí od záťaže nádrže, jej veľkosti. O ohrievač sa netreba osobitne starať, akurát by som ho raz začas očistil od rias, napr. mäkkou drôtenkou.

V prípade, že vodu vymieňame, odkaľujeme, je vhodnejšie ohrievač odpojiť elektrickú sieť, najmä ak vymieňame väčšie množstvo. V takom prípade sa môže stať, že časť ohrievača (najmä so silnejším príkonom) je silne rozpálená a po doplnení obyčajne studenšej vody môže prasknúť. To či je odkaľovanie nutné je individuálne. Záleží od množstva rýb, ich charakteru, filtrácie, vzduchovania a spotreby rastlín. Ak sa vám detritrozkladajúce sa exkrementy rýb a nespotrebovaného krmiva rozmáha, pristúpte k odkaľovaniu. Sú na to určené zvony, ktoré sú na zakončené širším hrdlom, ktoré vedie to užšej časti, na ktorú, alebo do ktorej sa vkladá hadica. Prípadne môžete odkaliť akvárium aj samotnou hadicou, ale obyčajne je to dosť nepraktické, pretože hrubšou hadicou vtiahnete aj štrk a piesok, a menšou hadicou zase operácia trvá neúmerne dlho. Samotný detrit je samozrejme do určitej miery žiaduci, za predpokladu, že pestujeme rastliny. Pretože detrit spotrebúvajú a menia ho na rastlinnú hmotu – je to vlastne ich . Ak máme v nádrži čierne stmavnuté plocha dna, je už detrit v deficite kyslíka a dávno sme ho mali odkaliť. Ak vám dobre rastú vodné rastliny, je nutné ich z času na čas preriediť. Prípadne očistiť od rias – mechanicky, presadiť, inak zoradiť. Rastliny sa zastrihávajú. Ak napr. chceme vytvoriť koberec z vodných rastlín, je dobré na začiatku strihať viac. Hnilé, zažltnuté je treba z akvária odstraňovať. Menšie rastliny je dobré sadiť pinzetami. Pri zastrihávaní odporúčam ostré nožničky. Pri koreňoch odstrihnite radšej viac, staré aj tak najskôr zhnijú a samotný tento proces hnitia nie je žiaduci.


When we acquire an aquarium, it requires care. It’s not a setup that you prepare once and then it exists on its own. Every aquarium needs certain inputs from humans – energy that must be expended to sustain life in it. Some interventions are necessary for functionality, while others are more aesthetic. Among the maintenance equipment, I would include: nets, hoses, wire brushes, siphon, buckets, scissors. Water needs to be changed from time to time. An aquarium cannot maintain the entire cycle of substances on its own; some must be removed, others added. It’s not like in nature, where there is a constant flow in watercourses, lakes, and seas that brings in new nutrients and carries away processed ones. Although there are flow systems, they are not common and certainly do not reach natural dimensions. In that case, we can talk about eliminating regular water changes. It can be called continuous water exchange. However, let’s return to the normal state. How often water needs to be changed and how much depends on many factors. If I mean a typical aquarium for a casual aquarist, the regular exchange should not exceed one-third of the tank’s volume. Water is replaced with clean water, or possibly treated water – for example, through reverse osmosis. If the water foams, is dirty, or organically heavily polluted, it needs to be changed. Clean water doesn’t foam. Foaming can occur during filtration.

The color of the water in the aquarium should be brownish-yellow to green. Even clear, translucent clean water is sometimes a sign of high levels of harmful nitrates. The glass becomes hazy due to lighting and daylight. It’s possible that suction cups, snails „clean“ it, but it still needs to be cleaned. For example, with a rough sponge for dishes, a bank card, or a soft wire brush. Always be careful not to let substrate from the bottom get into these tools. Because even a small grain of gravel can effectively scratch the glass. A magnetic scraper and a razor blade have the disadvantage that they can easily scratch the glass. Lime scale can be easily removed with a soft wire brush. If we want and can use chemicals, phosphoric acid or vinegar are suitable. Stronger acids are too strong for our hands. For example, use a cloth. An abrasive wire brush can also help in this case. The cover glass is cleaned in the same way with a wire brush. I recommend cleaning the front glass with clean water using two cloths – one for wet and the other for dry cleaning – polishing.

Internal filters need to be cleaned relatively often. How often depends on many factors. Every aquarist must learn to estimate the right time, but it can be said that the average time in a normal community tank, which is not overstocked, could be about 1 week. If the filter sucks in so many particles that it is literally clogged to the tube, it needs to be cleaned immediately. Be careful because the filter can also be clogged by Malaysian trumpet snails. Occasionally, the impellers of the pump need to be cleaned, the entire filter device rinsed under water, brushed, and each part cleaned out. It’s better not to wash the filter sponge of the internal filter with tap water but with water poured from the tank before. Tap water could harm the bacteria in the sponge. If we wash the filter media in aquarium water or water that does not contain unwanted gases, we keep the filter functional. Otherwise, the bacteria in it will be decimated. If you put in a new sponge for the aquarium, dirty it a bit with another insert from a run-in filter, or at least fill it with water from an older aquarium. For an external filter, the filter sponge needs to be cleaned less frequently. Initially more often, later occasionally. The filter wool and other filter parts as well. An external filter is advantageous in terms of maintenance; after purchasing it, you need to take care of it more, but there are not rare cases when an aquarist cleaned the sponge after a year, and everything was fine. The optimal size of all filters and their components depends on the load of the tank, its size. The heater does not need special care; I would just clean it occasionally from algae, for example, with a soft wire brush.

If we change water, siphon, it is better to disconnect the heater from the electric network, especially if we are replacing a larger amount. In that case, it may happen that a part of the heater (especially with a stronger power input) is heavily heated, and after replenishing it with usually colder water, it may burst. Whether siphoning is necessary is individual. It depends on the number of fish, their character, filtration, aeration, and plant consumption. If detritus – decomposing fish excrement and uneaten food – proliferates, proceed to siphoning. There are bells designed for this purpose, which have a wider throat at the end, which leads to a narrower part, onto which or into which a hose is inserted. Alternatively, you can siphon the aquarium with the hose itself, but it’s usually quite impractical because with a thicker hose, you draw in gravel and sand, and with a thinner hose, the operation takes disproportionately long. The detritus itself is, of course, to a certain extent desirable, assuming we are growing plants. Because plants consume detritus and turn it into plant matter – it’s actually their food. If there is a darkened area on the bottom of the tank, detritus is already deficient in oxygen, and we should have siphoned it long ago. If your aquatic plants are growing well, they need to be thinned out from time to time. Or clean from algae – mechanically, repot, rearrange. Plants are pruned. For example, if we want to create a carpet of aquatic plants, it is good to prune more at the beginning. Rotten, yellowed leaves should be removed from the aquarium. It is good to plant smaller plants with tweezers. When trimming, I recommend sharp scissors. When cutting roots, it is better to cut off more; old roots will rot anyway, and the process of rotting itself is not desirable.


Wenn wir ein Aquarium anschaffen, müssen wir uns darum kümmern. Es ist keine Einrichtung, die einmal vorbereitet wird und dann von selbst existiert. Jedes Aquarium benötigt bestimmte Inputs von Menschen – Energie, die aufgewendet werden muss, um das Leben darin aufrechtzuerhalten. Einige Eingriffe sind für die Funktionalität erforderlich, andere sind eher ästhetisch. Zu den Wartungsausrüstungen würde ich zählen: Netze, Schläuche, Drahtbürsten, Siphon, Eimer, Scheren. Das Wasser muss von Zeit zu Zeit gewechselt werden. Ein Aquarium kann den gesamten Stoffkreislauf nicht allein aufrechterhalten; einige müssen entfernt, andere hinzugefügt werden. Es ist nicht wie in der Natur, wo es einen ständigen Fluss in Wasserläufen, Seen und Meeren gibt, der neue Nährstoffe bringt und verarbeitete mitnimmt. Obwohl es Durchflusssysteme gibt, sind sie nicht üblich und erreichen sicherlich nicht natürliche Ausmaße. In diesem Fall können wir über die Beseitigung regelmäßiger Wasserwechsel sprechen. Es kann als kontinuierlicher Wasseraustausch bezeichnet werden. Aber lassen Sie uns zum normalen Zustand zurückkehren. Wie oft Wasser gewechselt werden muss und wie viel, hängt von vielen Faktoren ab. Wenn ich ein typisches Aquarium für einen Gelegenheitsaquarianer meine, sollte der reguläre Wechsel nicht mehr als ein Drittel des Tankvolumens betragen. Wasser wird durch sauberes Wasser ersetzt, oder möglicherweise behandelt – zum Beispiel durch Umkehrosmose. Wenn das Wasser schäumt, schmutzig ist oder organisch stark verschmutzt ist, muss es gewechselt werden. Sauberes Wasser schäumt nicht. Schäumen kann während der Filtration auftreten.

Die Farbe des Wassers im Aquarium sollte bräunlich-gelb bis grün sein. Selbst klares, transparentes sauberes Wasser ist manchmal ein Zeichen für einen hohen Gehalt an schädlichen Nitraten. Das Glas wird durch Beleuchtung und Tageslicht trüb. Es ist möglich, dass Saugnäpfe, Schnecken es „reinigen“, aber es muss dennoch gereinigt werden. Zum Beispiel mit einem groben Schwamm für Geschirr, einer Bankkarte oder einer weichen Drahtbürste. Achten Sie immer darauf, dass kein Substrat vom Boden in diese Werkzeuge gelangt. Denn selbst ein kleines Korn Kies kann das Glas effektiv zerkratzen. Ein magnetischer Schaber und eine Rasierklinge haben den Nachteil, dass sie das Glas leicht zerkratzen können. Kalkablagerungen können leicht mit einer weichen Drahtbürste entfernt werden. Wenn wir Chemikalien verwenden wollen und können, sind Phosphorsäure oder Essig geeignet. Stärkere Säuren sind zu stark für unsere Hände. Verwenden Sie zum Beispiel ein Tuch. Auch in diesem Fall kann eine abrasive Drahtbürste helfen. Die Abdeckglasscheibe wird auf die gleiche Weise mit einer Drahtbürste gereinigt. Ich empfehle, das Vorderglas mit sauberem Wasser mit zwei Tüchern zu reinigen – eines zum Nass- und das andere zum Trockenreinigen – Polieren.

Interne Filter müssen relativ oft gereinigt werden. Wie oft hängt von vielen Faktoren ab. Jeder Aquarianer muss lernen, die richtige Zeit einzuschätzen, aber man kann sagen, dass die durchschnittliche Zeit bei einem normalen Gemeinschaftsbecken, das nicht überbesetzt ist, etwa 1 Woche betragen könnte. Wenn der Filter so viele Partikel ansaugt, dass er buchstäblich bis zum Rohr darin verstopft ist, muss er sofort gereinigt werden. Seien Sie vorsichtig, denn der Filter kann auch von malaysischen Turmdeckelschnecken verstopft werden. Gelegentlich müssen die Flügelräder der Pumpe gereinigt, das gesamte Filtergerät unter Wasser gespült, gebürstet und alle Teile gereinigt werden. Es ist besser, den Filterschwamm des Innenfilters nicht mit Leitungswasser, sondern mit Wasser aus dem Tank vorher zu waschen. Leitungswasser könnte die Bakterien im Schwamm schädigen. Wenn wir das Filtermedium in Aquariumwasser oder Wasser, das keine unerwünschten Gase enthält, waschen, halten wir den Filter funktionsfähig. Andernfalls werden die Bakterien darin dezimiert. Wenn Sie einen neuen Schwamm für das Aquarium einsetzen, verschmutzen Sie ihn etwas mit einem anderen Einsatz aus einem eingelaufenen Filter oder füllen Sie ihn zumindest mit Wasser aus einem älteren Aquarium. Für einen externen Filter muss der Filterschwamm weniger häufig gereinigt werden. Anfangs öfter, später gelegentlich. Das Filtervlies und andere Filterteile auch. Ein externer Filter ist in Bezug auf die Wartung vorteilhaft; nach dem Kauf muss man sich mehr darum kümmern, aber es gibt nicht selten Fälle, in denen ein Aquarianer den Schwamm nach einem Jahr gereinigt hat, und alles war in Ordnung. Die optimale Größe aller Filter und ihrer Bestandteile hängt von der Belastung des Tanks und seiner Größe ab. Der Heizer benötigt keine besondere Pflege; Ich würde ihn nur gelegentlich von Algen reinigen, zum Beispiel mit einer weichen Drahtbürste.

Wenn wir Wasser wechseln, absaugen, ist es besser, den Heizer vom Stromnetz zu trennen, insbesondere wenn wir eine größere Menge ersetzen. In diesem Fall kann es passieren, dass ein Teil des Heizers (besonders mit einer stärkeren Leistungsaufnahme) stark erhitzt wird und nach dem Auffüllen mit normalerweise kälterem Wasser platzen kann. Ob das Absaugen notwendig ist, ist individuell. Es hängt von der Anzahl der Fische, ihrem Charakter, der Filtration, der Belüftung und dem Pflanzenverbrauch ab. Wenn sich Detritus – zersetzter Fischkot und ungenutztes Futter – vermehrt, gehen Sie zum Absaugen über. Dafür gibt es Glocken, die am Ende einen breiteren Hals haben, der in einen schmaleren Teil übergeht, in den der Schlauch eingeführt wird. Alternativ können Sie das Aquarium auch mit dem Schlauch selbst absaugen, aber es ist normalerweise ziemlich unpraktisch, weil Sie mit einem dickeren Schlauch Kies und Sand einsaugen und mit einem dünnen Schlauch die Operation unverhältnismäßig lange dauert. Der Detritus selbst ist natürlich bis zu einem gewissen Grad erwünscht, vorausgesetzt, wir ziehen Pflanzen an. Denn Pflanzen konsumieren Detritus und verwandeln ihn in Pflanzenmaterial – es ist eigentlich ihre Nahrung. Wenn auf dem Boden des Tanks eine verdunkelte Fläche vorhanden ist, ist der Detritus bereits sauerstoffarm, und wir hätten ihn längst absaugen sollen. Wenn Ihre Wasserpflanzen gut wachsen, müssen sie von Zeit zu Zeit ausgedünnt werden. Oder reinigen Sie von Algen – mechanisch, umtopfen, neu anordnen. Pflanzen werden beschnitten. Wenn Sie beispielsweise einen Teppich aus Wasserpflanzen erstellen möchten, ist es gut, am Anfang mehr zu schneiden. Faulige, vergilbte Blätter sollten aus dem Aquarium entfernt werden. Kleinere Pflanzen sollten mit Pinzetten gepflanzt werden. Beim Beschneiden empfehle ich scharfe Scheren. Beim Schneiden von Wurzeln ist es besser, mehr abzuschneiden; alte Wurzeln verrotten sowieso, und der Verrottungsprozess selbst ist nicht wünschenswert.