Rastliny, Príroda, Organizmy, Fotografie

Rastliny

Hits: 26378

Rastliny predstavujú neskutočný svet, ktorý tvorí základ biodiverzity našej planéty. Táto pestrosť zohráva kľúčovú úlohu v udržiavaní ekologickej rovnováhy.  majú pestrú morfológiu. Korene slúžia na fixáciu rastliny v pôde a na získavanie živín. Stonky podporujú rastlinu a slúžia na prenos vody a živín. Listy sú hlavnými orgánmi fotosyntézy, kde sa slnečná energia premieňa na chemickú energiu. Kvety sú orgány rozmnožovania, zatiaľ čo plody obsahujú semeno, ktoré je nevyhnutné pre nový cyklus života. Rastliny majú komplexné , ktoré im umožňujú prežiť a rásť.

je kľúčovým procesom, pri ktorom rastliny využívajú slnečnú energiu a na tvorbu organickej hmoty, pričom uvoľňujú kyslík do atmosféry. , transpirácia a vedenie vody sú ďalšie dôležité fyziologické procesy, ktoré zabezpečujú život a funkčnosť rastlín. Rastliny sú základnými stavebnou súčasťou ekosystémov. Sú prakticky jedinými producentmi hmoty, okrem veľmi malého počtu chemotrofných organizmov. Poskytujú priestor a potravu pre rôznorodé druhy živočíchov. Rastliny majú tiež schopnosť regenerovať pôdu a vodu od nežiadúcich látok a toxínov. Sú neoddeliteľnou súčasťou ľudskej civilizácie. Poskytujú potravu aj nám, vo forme ovocia, zeleniny, obilia a ďalších plodín.

Mnohé rastliny majú a sú využívané v tradičnej a modernej medicíne. Okrem toho majú rastliny kultúrne a estetické hodnoty, ktoré sú vyjadrené v záhradách, umení a symboloch. S narastajúcim tlakom ľudskej činnosti a zmenami klímy sú prírodné rastliny často ohrozené. Straty biodiverzity, a odlesňovanie sú ich nepriateľmi. Preto je dôležité implementovať ochranné opatrenia, vrátane zachovávania prírodných biotopov, udržiavania genofondu a zavedenia udržateľného hospodárenia s pôdou.

majú dlhú históriu spojenú s ľudskou kultúrou a sú neodmysliteľnou súčasťou našich záhrad, domovov. Ich krása, vôňa a symbolický význam robia z nich viac ako len dekoráciu – sú to symboly lásky, radosti, pokoja a mnohých ďalších emócií. Kvety pridávajú farbu, textúru a život, ich krása je zdrojom radosti a potešenia, a ich prítomnosť oživuje priestor a dodáva mu charakter. Mnohé druhy majú symbolický význam a sú spojené s rôznymi emóciami a udalosťami. sú symbolom lásky a romantiky, predstavujú čistotu a nevinnosť, a slnečnice symbolizujú priateľstvo a radostné myslenie. Kvety sa často používajú aj na vyjadrenie sústrasti, osláv alebo poďakovania. Kvety majú aj terapeutické účinky. Prítomnosť kvetov v domácnostiach alebo pracovných priestoroch môže zlepšiť náladu, znížiť stres a úzkosť a zvýšiť kreativitu a produktivitu. Práca v záhrade alebo starostlivosť o kvety môže byť aj relaxačná a terapeutická aktivita.


Pestoval som pestujem (859) / I cultivated I cultivate (859)

Agapanthus (8)

  1. Agapanthus `White`
  2. Agapanthus `Black Magic`
  3. Agapanthus `Blush Pink`
  4. Agapanthus africanus
  5. Agapanthus africanus `Fireworks`
  6. Agapanthus umbellatum `Blue`
  7. Agapanthus umbellatum `White`
  8. Agapanthus praecox

(5)

  1. Achillea filipendulina `Cloth of Gold`
  2. Achillea millefolium
  3. Achillea millefolium `Red Beauty`
  4. Achillea millefolium `Rose`
  5. Achillea millefolium `Summerwine`

Allium (19)

  1. Allium altaicum
  2. Allium ampeloprasum
  3. Allium ampeloprasum `Ping Pong`
  4. Allium bulgaricum
  5. Allium giganteum
  6. Allium hollandicum `Purple Sensation`
  7. Allium ledebourianum
  8. Allium nutans
  9. Allium oreophilum
  10. Allium sativum `Hanácky paličák`
  11. Allium sativum `Manín jarní z Dolněčí`
  12. Allium sativum `Rovenský`
  13. Allium schoenoprasum
  14. Allium schoenoprasum `Erecta
  15. Allium schoenoprasum `Praga
  16. Allium sp. `Gladiator`
  17. Allium sphaerocephalon `Drumstick`
  18. Allium vineale `Hair`
  19. Allium `Graceful Beauty`

Amaryllis (4)

  1. Amaryllis `Cleopatra`
  2. Amaryllis `Wild Amazone`
  3. Amaryllis belladonna
  4. Amaryllis belladonna `Pink`

(7)

  1. Anemone `Annabela Deep Rose`
  2. Anemone blanda
  3. Anemone blanda `Blue`
  4. Anemone blanda `Charmer`
  5. Anemone coronaria single `Mr. Fokker`
  6. Anemone coronaria single `Sylphide`
  7. Anemone japonica `Hadspen Abundance`

Argyranthemum (3)

  1. Argyranthemum `Magenta`
  2. Argyranthemum `Red`
  3. Argyranthemum `Toffee`

(4)

  1. Aster `Weisse Schöne`
  2. Aster amellus `Rudolf Goethe`
  3. Aster amellus `Rudolf Goethe`
  4. Aster dumosus `Scheekissen`

Astilbe (6)

  1. Astilbe ‚Close Harmony‘
  2. Astilbe `Glitter and Glamour`
  3. Astilbe `Pumila`
  4. Astilbe `White`
  5. Astilbe x arendsii `Weisse Gloria`
  6. Astilbe japonica `Deutschland`

A (31)

  1. Achillea `Pomegranate`
  2. Actinidia arguta `Red Jumbo`
  3. Adonis vernalis
  4. Aethionema grandiflorum
  5. Achiconia silvestre
  6. Alopecurus pratensis aureovariegatus
  7. Alstroemeria `Aurea Lutea`
  8. Alstroemeria `Orange King`
  9. Alstroemeria `Red`
  10. Amarcrinum howardii
  11. Amelanchier `Martin`
  12. Amelanchier alnifolia `Honeywood`
  13. Anacyclus depressus
  14. Androsace sevicea
  15. Anethum graveolens `Tetra`
  16. Anthurium andraeanum
  17. `Crimson Star`
  18. Aquilegia `Kirichami`
  19. Aquilegia `Nora Barlow`
  20. Arenaria montana
  21. Armeria `Amanda White`
  22. Aronia melanocarpa `Viking`
  23. Aronia melanocarpa `Rubina`
  24. Artemisia drancunculus
  25. Artemisia stelleriana
  26. Asplenium `Angustifolia`
  27. Astrantia `Star of Treasure`
  28. Aubrieta hybrida `Leichtlinii`
  29. Aubrieta hybrida `Royal Blue`
  30. Azalea japonica `Julietta`
  31. Azalea japonica `Nancy Dippel`

B (11)

  1. Belamcanda chinensis
  2. `Pink`
  3. Bergenia `Rotblum`
  4. Bidens `2Teeth Oly Star
  5. Bidens `2Teeth`M Red Yellow Center`
  6. Bistorta officinalis
  7. Bracteantha heliana `Gold`
  8. Brachyscome `Surdaisy Blue`
  9. Brachyscome `Surdaisy White`
  10. Buddleja `Flower Power`
  11. Burrageara `Nelly Isler`

Callistephus (8)

  1. Callistephus chinensis
  2. Callistephus chinensis `Anielka`
  3. Callistephus chinensis `Electric Alba`
  4. Callistephus chinensis `Nel`
  5. Callistephus chinensis `Princess Alba`
  6. Callistephus chinensis `Sandra`
  7. Callistephus chinensis `Silvery Blue`
  8. Callistephus chinensis `Silvery Rose`

Campanula (6)

  1. Campanula carpatica `Pearl White`
  2. Campanula cochleariifolia ` White`
  3. Campanula cochleariifolia `Blue Baby`
  4. Campanula persicifolia `Alba`
  5. Campanula portenschlagiana
  6. Campanula punctata ``

(11)

  1. Capsicum annum `Di Capriglio`
  2. Capsicum annum `Dumas`
  3. Capsicum annum `Etna Rosso a Mazzetti`
  4. Capsicum annum `Friggitello`
  5. Capsicum annum `Liebesapfel`
  6. Capsicum annum `Lipstick`
  7. Capsicum annum `Papaccella`
  8. Capsicum annum `Peperone`
  9. Capsicum annum `Pyramid`
  10. Capsicum annum `Yolo Wonder B`
  11. Capsicum chinense `Peperoncino Piccante Naga Morich Chocolate`

Clematis (23)

  1. Clematis `Andromeda`
  2. Clematis `Asao`
  3. Clematis `Dr. Ruppel`
  4. Clematis `Duchess of Edinburgh`
  5. Clematis `Ernest Markham`
  6. Clematis `Golden Dream`
  7. Clematis `Ivan Olsson`
  8. Clematis `Little Mermaid`
  9. Clematis `Maidwell Hall`
  10. Clematis `Multi Blue`
  11. Clematis `My Darling`
  12. Clematis `Niobe`
  13. Clematis `Omoshiro`
  14. Clematis `Patricia Ann Fretwell`
  15. Clematis `Patricia Ann Fretwell `Pafar„
  16. Clematis `Princess Kate`
  17. Clematis `Golden Dream`
  18. Clematis `Sarah Elisabeth`
  19. Clematis `Rouge Cardinal`
  20. Clematis `The President`
  21. Clematis `Ville de Lyon`
  22. Clematis montana `Freda`
  23. Clematis montana `Rubens`

Coreopsis (5)

  1. Coreopsis verticiliata `Moonbeam`
  2. Coreopsis verticiliata `Red Ruby`
  3. Coreopsis verticillata `Li`l Bang Daybreak`
  4. Coreopsis `Bengal Tiger`
  5. Coreopsis `Ruby Frost`

(3)

  1. Crinum `Cintho Alpha`
  2. Crinum powellii
  3. Crinum powellii `Alba`

Crocus (16)

  1. Crocus `Kosolkowii`
  2. Crocus `Sieberi Spring Beauty`
  3. Crocus `Sieberi Tricolor`
  4. Crocus fuscotinctus
  5. Crocus chrysanthus `Ard Schenk`
  6. Crocus chrysanthus `Blue pearl`
  7. Crocus chrysanthus `Orange Monarch`
  8. Crocus chrysanthus `Prins Claus`
  9. Crocus chrysanthus `Romance`
  10. Crocus sieberi `Firefly`
  11. Crocus speciosus `Oxonian`
  12. Crocus vernus `Grandiflora Pickwick`
  13. Crocus vernus `Jeanne D`Arc`
  14. Crocus vernus `King of Striped`
  15. Crocus vernus `Vanguard`
  16. Crocus sativus

Cucumis (4)

  1. Cucumis melo `Banana`
  2. Cucumis melo `Kazakh`
  3. Cucumis melo var. flexuosus`
  4. Cucumis sativus `Aikon F1`

Cucurbita (7)

  1. Cucurbita pepo `Banana`
  2. Cucurbita pepo `Costates Romanesco`
  3. Cucurbita pepo `Goldena`
  4. Cucurbita pepo `Green Disc`
  5. Cucurbita pepo `Maskáčik`
  6. Cucurbita pepo `Orelia`
  7. Cucurbita pepo `Sunseance`

Cyclamen (6)

  1. Cyclamen cilicicum
  2. Cyclamen coum
  3. Cyclamen hederifolium
  4. Cyclamen hederifolium `Album`
  5. Cyclamen hederifolium `Rosea`
  6. Cyclamen neapolitanum

C (21)

  1. Calathea makoyana
  2. Calendula officinalis
  3. Calibrachoa `Beautical French Vanilla`
  4. Calibrachoa hybrida `Eyeconic Cherry Blossom`
  5. Caltha palustris `Alba`
  6. Caltha palustris `Multiplex`
  7. Cambria catatante
  8. Canna `Picasso`
  9. Canna indica `Lucifer`
  10. buchananii
  11. Carex morrowii `Ice Dance`
  12. Celosia argenta
  13. Centaurea dealbata
  14. Centaurea macrocephala
  15. Citrullus lanatus`Early Moonbeam`
  16. Corydalis `Porcelain Blue`
  17. Cosmos bipinnatus
  18. Crassula ovata
  19. Crocosmia `Emily McKenzie`
  20. Cyclanthera pedata
  21. Cynara scolymus

Dahlia (13)

  1. Dahlia `Crazy Love`
  2. Dahlia `Pablo`
  3. Dahlia `Peaches and Cream`
  4. Dahlia `Rebecca`s World`
  5. Dahlia `Topmix White`
  6. Dahlia `Verone`s Obsidian`
  7. Dahlia `Winesome`
  8. Dahlia cactus `Happy Days Bicolour Yellow Red`
  9. Dahlia cactus `Holyphill Spiderwoman`
  10. Dahlia cactus `Sprarkler`
  11. Dahlia cactus `Vuurvogel`
  12. Dahlia decorative `Procyon`
  13. Dahlia dinnerplate `Lady Darlene`

Delosperma (7)

  1. Delosperma `Fire Spinner`
  2. Delosperma acanthodes `Beaufort West`
  3. Delosperma cooperi `Jewel of Desert Peridott`
  4. Delosperma dyeri `Red Mountain`
  5. Delosperma nubigeum `Gold Nugget`
  6. Delosperma obtusum `Safari`
  7. Delosperma sp. `Strongred`

Delphinium (11)

  1. Delphinium `Astolat`
  2. Delphinium `Black Knight`
  3. Delphinium `Delgenius Kingsley`
  4. Delphinium `Galahad`
  5. Delphinium `Higlander Bolero`
  6. Delphinium `Higlander Samba`
  7. Delphinium `Kleine Nachtmusik`
  8. Delphinium `Rose`
  9. Delphinium `Rose White Bee`
  10. Delphinium `Summer Skies`
  11. Delphinium Belladonna `Völkerfrieden`

D (4)

  1. Daucus carota `Cosmic Purple`
  2. Diascia `Doorlje Pink Elfjes`
  3. Digitalis purpurea `Dalmatian F1 Peach`
  4. Dryas octopetala

Echinacea (21)

  1. Echinacea `Big Kahuna`
  2. Echinacea `Butterfly Kisses`
  3. Echinacea `Eccentric`
  4. Echinacea `Fatal Attraction`
  5. Echinacea `Fountain Pink Eye`
  6. Echinacea `Golden Skipper`
  7. Echinacea `Green Twister
  8. Echinacea `Hot Lava`
  9. Echinacea `Cherry Fluff`
  10. Echinacea `Innocent Meadow `
  11. Echinacea `Lemon Drop`
  12. Echinacea `Marmalade`
  13. Echinacea `Milkshake`
  14. Echinacea `Now Cheesier`
  15. Echinacea `Prima Ginger`
  16. Echinacea `Strawberry and Cream`
  17. Echinacea `Supreme Cantaloupe`
  18. Echinacea `Sunseekers Magenta`
  19. Echinacea purpurea
  20. Echinacea purpurea `Marmalade`
  21. Echinacea purpurea `Southern Belle`

Erigeron (3)

  1. Erigeron flelltii
  2. Erigeron linearis
  3. Erigeron scopulinus

(3)

  1. Echinops ritro
  2. Eremurus `Bungel`
  3. Eremurus x isabellinus `Cleopatra`
  4.  Erodium `Bishop`s Form`

Fritillaria (9)

  1. Fritillaria persica
  2. Fritillaria persica `Adiyaman`
  3. Fritillaria imperialis
  4. Fritillaria imperialis `Aurora`
  5. Fritillaria imperialis `Red`
  6. Fritillaria imperialis `Lutea`
  7. Fritillaria imperialis `Rubra`
  8. Fritillaria meleagris
  9. Fritillaria uva-vulpis

Fuchsia (4)

  1. Fuchsia `Harry Grey`
  2. Fuchsia `Mrs. Popple`
  3. Fuchsia `Shadow Dancer Helena`
  4. Fuchsia `Sir Matt Busby`

F (7)

  1. Ferraria crispa
  2. glauca `Instense Blue`
  3. Ficus carica `Francuesco`
  4. Fittonia verschaffeltii
  5. Fragaria vesca
  6. Fragaria vesca `Yellow Wonder`
  7. Fragaria vesca `Korsica`

Gladiolus (10)

  1. Gladiolus `Atom`
  2. Gladiolus `Blue Frost`
  3. Gladiolus `Mini Atom
  4. Gladiolus `Peter Pears`
  5. Gladiolus `Rose Supreme`
  6. Gladiolus `Tricolor`
  7. Gladiolus grandiflora `Espresso`
  8. Gladiolus grandiflora `Violetta`
  9. Gladiolus grandiflora `Yellow`
  10. Gladiolus nanus `Nymph`

G (10)

  1. Gaillardia `Red Sun`
  2. Garvinea `Cheeky`
  3. Gaura lindheimeri
  4. Gentiana acualis
  5. Gentiana angustifolia
  6. Geum coccineum
  7. Globularia cordifolia
  8. Gloriosa rothschildiana
  9. Guzmania lingulata
  10. Gypsophila cerastoides

Helianthemum (3)

  1. Helianthemum `Apricot Queen`
  2. Helianthemum `Fire Dragon`
  3. Helianthemum nummularium

(5)

  1. Helleborus `Double Green Spotted`
  2. Helleborus `White Spotted`
  3. Helleborus `Winter Sunshine`
  4. Helleborus niger `Christmas Carol`
  5. Helleborus orientalis `Ballard Hybrids`

Hemerocallis (7)

  1. Hemerocallis sp. `Stella de Oro`
  2. Hemerocallis sp. `Arctic Snow`
  3. Hemerocallis `Bonanza`
  4. Hemerocallis `Crimson Pirate`
  5. Hemerocallis `Cryptic Message`
  6. Hemerocallis `Frans Hals`
  7. Hemerocallis `White Lemonade`

(23)

  1. Heuchera `Amber Waves`
  2. Heuchera `Black Pearl`
  3. Heuchera `Blondie`
  4. Heuchera `Citrus Shock`
  5. Heuchera `Forever Purple`
  6. Heuchera `Champagne`
  7. Heuchera `Cherry Truffles`
  8. Heuchera `Lime Marmelade`
  9. Heuchera `Lipstick`
  10. Heuchera `Master Painter Picasso`
  11. Heuchera `Nothern Exposure Amber`
  12. Heuchera `Nothern Exposure Red`
  13. Heuchera `Peach Flambe`
  14. Heuchera `Red Lightning`
  15. Heuchera `Red Rover`
  16. Heuchera `Rex Purple`
  17. Heuchera `Silver Scrolls`
  18. Heuchera `Sugar Plum`
  19. Heuchera `Sweet Tea`
  20. Heuchera `Peach Flambe`
  21. Heuchera `Master Painter Picasso`
  22. Heuchera `Sugar Plum`
  23. Heuchera x hybrida `Electra`

(3)

  1. Heucherella `Citrus Shock`
  2. Heucherella `Red Rover`
  3. Heucherella `Sweet Tea`

Hibiscus (8)

  1. Hibiscus moscheutos`Kopper King`
  2. Hibiscus moscheutos`Nippon Blush F1`
  3. Hibiscus moscheutos`Nippon Red F1`
  4. Hibiscus moscheutos XXL
  5. Hibiscus rosa sinensis
  6. Hibiscus syriacus `Duc de Brabant`
  7. Hibiscus syriacus `Ardens`
  8. Hibiscus syriacus `Oisseau Bleu`

Hippophae (4)

  1. Hippophae rhamnoides
  2. Hippophae rhamnoides `Pollmix 3`
  3. Hippophae rhamnoides `Aromat`
  4. Hippophae rhamnoides `Slniečko`

Hyacinthus (5)

  1. Hyacinthus `Dark Dimension`
  2. Hyacinthus orientalis `Blue Jacket`
  3. Hyacinthus orientalis `Carnegie`
  4. Hyacinthus orientalis `Gipsy Queen`
  5. Hyacinthus orientalis `Jan Bos`

Hydrangea (5)

  1. Hydrangea macrophylla `Peppermint`
  2. Hydrangea macrophylla `Renate Steiniger`
  3. Hydrangea serrata `Bluebird`
  4. Hydrangea paniculata `Wims Red`
  5. Hydrangea petiolaris

H (11)

  1. Hablitzia tamnoides
  2. Habranthus robustus
  3. Haworthia kraussiana
  4. annuus – slnečnica ročná
  5. Helianthus tuberosus
  6. Helichrysum bracteatum
  7. Heliopsis helianthoides
  8. Hepatica nobilis
  9. Heucherella `Sweet Tea`
  10. Hippeastrum `Flora Magica`
  11. Hymenocallis `Sulphur Queen`

CH (1)

  1. Chasmanthe saturnus

(3)

  1. Iberis sempervirens `Pink Ice`
  2. Iberis umbellata
  3. Iberis umbellata amara

Iris (18)

  1. Iris `Butterfly`
  2. Iris `Butter and Sugar`B
  3. Iris ensata
  4. Iris lousiana black `Gamecock`
  5. Iris pumila
  6. Iris pumila `Petite Polka`
  7. Iris reticulata `Harmony`
  8. Iris sibirica
  9. Iris sibirica `Blue King`
  10. Iris sibirica `Sea Stars`
  11. Iris sibirica `Snow Queen`
  12. Iris sibirica `Sparkling Rose`
  13. Iris sibirica `Sugar Rush`
  14. Iris sibirica `Tiffed in Blue`
  15. Iris versicolor
  16. Iris versicolor `Kermesina`
  17. Iris `Butter and Sugar`

I (4)

  1. Inula ensifolia
  2. Ipomea purpurea
  3. Ismene `Sulphur Queen`
  4. Ixia `Spotlight`

J (1)

  1. Jasione `Blue Light`

(8)

  1. Lactuca sativa `Kamelot`
  2. Lactuca sativa `Listonoh`
  3. Lactuca sativa `Roden`
  4. Lactuca sativa crispa
  5. Lactuca sativa var. capitata
  6. Lactuca sativa var. capitata `Citrin`
  7. Lactuca sativa var. capitata `Mars`
  8. Lactuca sativa var. capitata ‘Rekord‘

Leucanthemum (4)

  1. Leucanthemum `Banana Cream`
  2. Leucanthemum `Real Galaxy`
  3. Leucanthemum x superbum
  4. Leucanthemum maximum

Liatris (5)

  1. Liatris spicata
  2. Liatris spicata `Alba`
  3. Liatris spicata `Floristan White`
  4. Liatris spicata `Kobold`
  5. Liatris spicata `Purpur`

Lilium (29)

  1. Lilium `Arabian Night`
  2. Lilium `Happy Love`
  3. Lilium `Forever Linda`
  4. Lilium `Forever Susan`
  5. Lilium `Landini`
  6. Lilium `Little Kiss`
  7. Lilium `Lotus Elegance`
  8. Lilium `Magic Star`
  9. Lilium `Mount Aspiring`
  10. Lilium `Nightrider`
  11. Lilium `Pearl Frances`
  12. Lilium `Red Velvet`
  13. Lilium `Roselily Celina`
  14. Lilium `Sheherezade`
  15. Lilium `Virtuoso`
  16. Lilium `Yellow Cocotte`
  17. Lilium asiatic `Mapira`
  18. Lilium asiatic `Must See`
  19. Lilium asiatic `Zwart Black`
  20. Lilium asiatic `Zwart Black White`
  21. Lilium lancifolium`Flore Pleno`
  22. Lilium martagon
  23. Lilium oriental
  24. Lilium oriental `Dizzy`
  25. Lilium oriental `Milano`
  26. Lilium oriental `Red`
  27. Lilium oriental `Stargazer`
  28. Lilium pardalinum x longiflorum fusion
  29. Lilium regale

(4)

  1. Lobelia cardinalis
  2. Lobelia hybrid `Hot Waterblue`
  3. Lobelia hybrid `Frico Shine`
  4. Lobelia speciosa

Lycopersicon (80)

  1. Lycopersicon lycopersicum `Altai Whiteg`
  2. Lycopersicon lycopersicum `Amania Orange`
  3. Lycopersicon lycopersicum `Baba Sura`
  4. Lycopersicon lycopersicum `Berkeley Tie Dye`
  5. Lycopersicon lycopersicum `Big Rainbow`
  6. Lycopersicon lycopersicum `Big Yellow Zebra`
  7. Lycopersicon lycopersicum `Black from Tula`
  8. Lycopersicon lycopersicum `Black Giant`
  9. Lycopersicon lycopersicum `Black Iccicle`
  10. Lycopersicon lycopersicum `Black Strawberry`
  11. Lycopersicon lycopersicum `Blue Smoke`
  12. Lycopersicon lycopersicum `Bodrjatsok`
  13. Lycopersicon lycopersicum `Brown Berry`
  14. Lycopersicon lycopersicum `Cappuccino`
  15. Lycopersicon lycopersicum `Crushed Heart`
  16. Lycopersicon lycopersicum `Curranto F1`
  17. Lycopersicon lycopersicum `Čokoládový zajac`
  18. Lycopersicon lycopersicum `Čudo Altaja`
  19. Lycopersicon lycopersicum `Dark Galaxy`
  20. Lycopersicon lycopersicum `Dwarf Freds Tie Dye`
  21. Lycopersicon lycopersicum `Eagle Beak`
  22. Lycopersicon lycopersicum `Egyptian`
  23. Lycopersicon lycopersicum `Emerald Apple`
  24. Lycopersicon lycopersicum `Golden Queen`
  25. Lycopersicon lycopersicum `Green Zebra`
  26. Lycopersicon lycopersicum `Harvard Square`
  27. Lycopersicon lycopersicum `Hillbilly`
  28. Lycopersicon lycopersicum `Himber Alt`
  29. Lycopersicon lycopersicum `Hippie Zebra`
  30. Lycopersicon lycopersicum `Hviezda Taškentu`
  31. Lycopersicon lycopersicum `Honey Moon F1`
  32. Lycopersicon lycopersicum `Cherokee Purple`
  33. Lycopersicon lycopersicum `Chocolate Miracle`
  34. Lycopersicon lycopersicum `Chocolate Stripes`
  35. Lycopersicon lycopersicum `Indigo Apple`
  36. Lycopersicon lycopersicum `Ispolin`
  37. Lycopersicon lycopersicum `Kakao F1`
  38. Lycopersicon lycopersicum `Kosovo`
  39. Lycopersicon lycopersicum `Kozula 186`
  40. Lycopersicon lycopersicum `Le Sirop Derable`
  41. Lycopersicon lycopersicum `Líškin nos`
  42. Lycopersicon lycopersicum `Long Tal Sally`
  43. Lycopersicon lycopersicum `Lovely Lush`
  44. Lycopersicon lycopersicum `Lucky Tiger`
  45. Lycopersicon lycopersicum `Medvedia labka`
  46. Lycopersicon lycopersicum `Mint Julep`
  47. Lycopersicon lycopersicum `Mille Forries`
  48. Lycopersicon lycopersicum `Moneymaker`
  49. Lycopersicon lycopersicum `Orange Banana`
  50. Lycopersicon lycopersicum `Pinneaple Heart`
  51. Lycopersicon lycopersicum `Ping Fig`
  52. Lycopersicon lycopersicum `Ping Tiger`
  53. Lycopersicon lycopersicum `Pink Bull`
  54. Lycopersicon lycopersicum `Pink Helmet`
  55. Lycopersicon lycopersicum `Purple Calabash`
  56. Lycopersicon lycopersicum `Puzala Khata`
  57. Lycopersicon lycopersicum `Queen of the Night`
  58. Lycopersicon lycopersicum `Rebel Starfighter VT 16`
  59. Lycopersicon lycopersicum `Red Dragon Heart`
  60. Lycopersicon lycopersicum `Roma Striee`
  61. Lycopersicon lycopersicum `Rosa`
  62. Lycopersicon lycopersicum `Rose Honei`
  63. Lycopersicon lycopersicum `Rosijskij Koralowy`
  64. Lycopersicon lycopersicum `Russian Purple`
  65. Lycopersicon lycopersicum `Russian Rose`
  66. Lycopersicon lycopersicum `Snow White Cherry`
  67. Lycopersicon lycopersicum `Siberian Shangy`
  68. Lycopersicon lycopersicum `Sibírska Olečka`
  69. Lycopersicon lycopersicum `Sumo`
  70. Lycopersicon lycopersicum `Tajga`
  71. Lycopersicon lycopersicum `Tipo S. Marzano`
  72. Lycopersicon lycopersicum `Tlacolula`
  73. Lycopersicon lycopersicum `Ussuri Tigger`
  74. Lycopersicon lycopersicum `Valencia`
  75. Lycopersicon lycopersicum `Vajce vtáka Ohniváka`
  76. Lycopersicon lycopersicum `Vaňka`
  77. Lycopersicon lycopersicum `Veselý sused`
  78. Lycopersicon lycopersicum `Yellow `
  79. Lycopersicon lycopersicum `Yup`
  80. Lycopersicon lycopersicum `Zapotec Brown Flesh`

L (15)

  1. Lavandula angustifolia
  2. Lavandula angustifolia `Hidcote Blue`
  3. Leucojum aestivum
  4. Lewisia cotyledon `Elise`
  5. Linim flavum `Compactum`
  6. perenne
  7. Linum perenne `Saphir`
  8. Liso calcuta
  9. Lonicera japonica `Red World`
  10. Ludisia discolor
  11. Luffa cylindrica
  12. Lupinus polyphyllus `Gallery Blue`
  13. Lupinus polyphyllus `Kronleuchter`
  14. Lychnis coronaria
  15. Lychnis chalcedonica

(4)

  1. Muscari armeniacum `Touch of Snow`
  2. Muscari aucheri `White Magic`
  3. Muscari botryoides
  4. Muscari botryoides `Pink Sunrise

(5)

  1. Mentha spicata `Marokko`
  2. Mentha suaveolens
  3. Mentha suaveolens ´Variegata´
  4. Mentha x piperita `Glaciale`
  5. Mentha x piperita var. citrata

Monarda (6)

  1. Monarda `Balmy Rose`
  2. Monarda `Balmy Lilac`
  3. Monarda `Bee Bright`
  4. Monarda `Bee-Merry Imp.`
  5. Monarda `Cambridge Scarlet`
  6. Monarda `Sugar Buzz Pink Frosting`

Morus (3)

  1. Morus alba pendula
  2. Morus nigra `Milanówek`
  3. Morus rotundiloba `Mojo Berry`

M (9)

  1. Malva mauritiana
  2. Malus domestica
  3. Malus domestica `Pidi Merlin`
  4. Mandevilla sanderi `Dark Red`
  5. Mandevilla sanderi `Rosa`
  6. Mandevilla sanderi `White`
  7. Mandevilla sanderi `Yellow`
  8. Morus acidosa `Mulle`
  9. Myosotis alpestris

N (5)

  1. acropolis
  2. Narcissus hybrid
  3. Nerium oleander
  4. Nicotiana alata
  5. Nymphaea `Rot`

(5)

  1. Ocimum basillicum `Cinnamonette`
  2. Ocimum basillicum `Dark Green`
  3. Ocimum basillicum `Limone`
  4. Ocimum basillicum `Purple Opaal`
  5. Ocimum basilicum var. thyrsiflora

O (4)

  1. Oenothera macrocarpa
  2. Oenothera `Siskyou Pink`
  3. Origanum majorana
  4. Osteospermum spp.

Pelargonium (4)

  1. Pelargonium peltatum `Anti-Mosquito`
  2. Pelargonium peltatum `Lila`
  3. Pelargonium peltatum `Red`
  4. Pelargonium zonale `Fireworks Pink˙`

(22)

  1. Phlox `Daisy Hill`
  2. Phlox `Dorotka`
  3. Phlox `Joawis Bloom`
  4. Phlox douglasii `Ochsenblut`
  5. Phlox douglassi `Crackerjack`
  6. Phlox drummondii stellaris
  7. Phlox paniculata
  8. Phlox paniculata `Blue Moon`
  9. Phlox paniculata `Early Lavender Pop`
  10. Phlox paniculata `Early Pink`
  11. Phlox paniculata `Early Red`
  12. Phlox paniculata `Flame Pro Purple`
  13. Phlox paniculata `Flame Pro Soft Pink`
  14. Phlox paniculata ``
  15. Phlox paniculata `Oakingtown Blue Eyes`
  16. Phlox paniculata `Orange Perfection`
  17. Phlox paniculata `Red Wings`
  18. Phlox paniculata `Scarlet Flame`
  19. Phlox subulata `Candy Stripes`
  20. Phlox subulata `McDaniel`s Cushion`
  21. Phlox subulata `Nettleton Variation`
  22. Phlox subulata `Ronsdorfer Schone`

Primula (10)

  1. Primula `Baltic Blue`
  2. Primula acaulis `Zebra`
  3. Primula belarina `Delft Blue`
  4. Primula bulleyana
  5. Primula denticulata `Alba`
  6. Primula denticulata `Blue`
  7. Primula denticulata `Rosa`
  8. Primula elatior `Gold Lace`
  9. Primula japonica `Alba`
  10. Primula rosea

Prunus (10)

  1. Prunus armeniacus `Garden Aprigold`
  2. Prunus avium `Kasandra`
  3. Prunus avium `Summit`
  4. Prunus avium `Sylvia`
  5. Prunus cerasus `Carmine Jewel`
  6. Prunus domestica
  7. Prunus domestica `Goldust`
  8. Prunus persica ´Cresthaven´
  9. Prunus persica `Stark Red Gold`
  10. Prunus persica `Venus`

Pulsatilla (9)

  1. Pulsatilla albana
  2. Pulsatilla slavica
  3. Pulsatilla vulgaris
  4. Pulsatilla vulgaris `Blaue Glocke`
  5. Pulsatilla vulgaris `Blue Violet`
  6. Pulsatilla vulgaris `Dark Red`
  7. Pulsatila vulgaris `Röde Klökke`
  8. Pulsatila vulgaris `Violet Shades`
  9. Pulsatilla vulgaris alba

P (21)

  1. Paphiopedilum philippinense
  2. Passiflora edulis
  3. Pennisetum alopecuroides
  4. Perezia recurvata
  5. Pericallis x hybrida `Orange Field`
  6. Persicaria affinis 
  7. Persicaria ampexicaulis `
  8. Petrocalis pyrenaica
  9. `Crazytunia Pink Flamingo`
  10. Phalaenopsis lueddemanniana
  11. Phalaenopsis spp.
  12. Phyteuma scheuchzeri
  13. Pisum sativum `Norli`
  14. Pisum sativum `Opal Creek`
  15. Platycodon grandiflorus `White`
  16. Platycodon grandiflorus `Astra Blue`
  17. Platycodon grandiflorus `Astra pink`
  18. Pleione bulbocodium
  19. Punica granatum
  20. Puschkinia `Libanotica`
  21. Pyrethrum `Robinson`s`

Rhododendron (5)

  1. Rhododendron `Dunkelviolett`
  2. Rhododendron `Impeditum Select`
  3. Rhododendron `Saint Merryn`
  4. Rhododendron Impeditum `Azurika`
  5. Rhododendron obtusum azalea

(7)

  1. Ribes `White Hollander`
  2. Ribes grossularia „Mucurines`
  3. Ribes rubrum „Witte Hollander`
  4. Ribes rubrum „Rovada`
  5. `Eva`
  6. Ribes nigrum `Titania`
  7. Ribes uva-crispa `Pax`

Rosa (9)

  1. Rosa `Augusta Luise`
  2. Rosa `Ballade`
  3. Rosa `Better Times`
  4. Rosa `Edelrose`
  5. Rosa `Flaming Star`
  6. Rosa `Kleinstrauchrose`
  7. Rosa `Nostalgie`
  8. Rosa `Summer of Love`
  9. Rosa ` Clementine`

Rubus (11)

  1. Rubus arcticus`Mespi`
  2. Rubus fruticosus `Navaho`
  3. Rubus fruticosus `Tayberry Buckingham`
  4. Rubus idaeus
  5. Rubus idaeus `Autumn First`
  6. Rubus idaeus `Two Timer Sugana`
  7. Rubus idaeus `Black Jewel`
  8. Rubus idaeus `Fallgold`
  9. Rubus idaeus `Tulameen`
  10. Rubus idaeus `Zefa Herbsternte`
  11. Rubus illecebrosus

(7)

  1. Rudbeckia `Happy Smiley`
  2. Rudbeckia `SmileyZ Giggling`
  3. Rudbeckia `Sunbeckia Olivia`
  4. Rudbeckia `Sunbeckia Ophelia`
  5. Rudbeckia fulgida
  6. Rudbeckia hirta
  7. Rudbeckia hirta `Dark Orange`
  8. Rudbeckia hirta `Happy`
  9. Rudbeckia hirta `SmileyZ Lemon`
  10. Rudbeckia hirta `Tiger`

R (2)

  1. Raphanus sativus `Yellow Radish`
  2. Rhodoxis `Fairy Kisses`

Saintpaulia (23)

  1. Saintpaulia `AE-Strelets Elit`
  2. Saintpaulia `Aly`s Crinolines`
  3. Saintpaulia `Amadeus`
  4. Saintpaulia `Arcturus`
  5. Saintpaulia `Austen`s Love`
  6. Saintpaulia `Bob`s Omega`
  7. Saintpaulia `Buckeye Cherry Freckless
  8. Saintpaulia `Coral Fantasy`
  9. Saintpaulia `Crimson Ice`
  10. Saintpaulia `Debon`s Christmas Morning`
  11. Saintpaulia `Decelles` Flamingo`
  12. Saintpaulia `EK-Shankhaiskala Roza`
  13. Saintpaulia `Elizabeth
  14. Saintpaulia `Humako Inches`
  15. Saintpaulia `Ian-Zabava`
  16. Saintpaulia `Lyo`ns Magic Charm`
  17. Saintpaulia `Ma`s Melody Girl `
  18. Saintpaulia `RS-Arlekino`
  19. Saintpaulia `RS-Balerina`
  20. Saintpaulia `Saturn Light`
  21. Saintpaulia diplotricha
  22. Saintpaulia grandigolia
  23. Saintpaulia ionantha – africká fialka – paulínka

Saxifraga (19)

  1. Saxifraga `Allendale Ina`
  2. Saxifraga ``
  3. Saxifraga `Brno`
  4. Saxifraga `Cleo`
  5. Saxifraga `Dejvice`
  6. Saxifraga `Giuseppe Verdi`
  7. Saxifraga `Gotthenburg`
  8. Saxifraga `L. G. Godseff`
  9. Saxifraga `Lismore Carmine`
  10. Saxifraga `Milujma`
  11. Saxifraga `Pech Melba`
  12. Saxifraga arendsii
  13. Saxifraga arendsii `Purpurteppich`
  14. Saxifraga ferdinandi-coburgii `Wechten`
  15. Saxifraga kolenatiana rosea
  16. Saxifraga oppositifolia
  17. Saxifraga sancta
  18. Saxifraga x arendsii `Rosenzwerg`
  19. Saxifraga x arendsii `Touran Deep Red`

Solanum (6)

  1. Solanum melongena
  2. Solanum melongena `Bianca`
  3. Solanum melongena `Casper`
  4. Solanum melongena `Falcon F1`
  5. Solanum melongena `Laura`

S (23)

  1. Salvia greggii `Royal Bumble`
  2. Salvia officinalis
  3. Salvia officinalis `Aurea`
  4. Salvia officinalis `Purpurascens`
  5. Salvia officinalis `Tricolor`
  6. Saponaria ocymoides
  7. Saponaria ocymoides `Jabora`
  8. Scilla sibirica
  9. Scirpus cernuus
  10. Sedum hybridum `Matrona`
  11. Sempervivum `Crimson Velvet`
  12. Sempervivum `Red Papaver`
  13. Silenia trifoliata
  14. acaulis
  15. Sisyrinchium sp. `Devon Skies`
  16. Solenostemon scutallarioides `Rainbow`
  17. Sparaxis spp.
  18. Spirea japonica ‚Little Princess‘
  19. Spiraea arguta
  20. Sprekelia formossisima
  21. Stipa `Pony Tails`
  22. Stomatium mustellinum
  23. Szizostylis coccinea `Major`

Tagetes (3)

  1. Tagetes erecta `Kilimanjaro White`
  2. Tagetes patula
  3. Tagetes patula `Mr. Majestic`

(4)

  1. Thymus `Silver Queen`
  2. Thymus serpyllum
  3. Thymus serpyllum`Magic Carpet`
  4. Thymus vulgaris

Tulipa (29)

  1. Tulipa `Bella Blush`
  2. Tulipa `Brisbane`
  3. Tulipa `Crispa Bell Song`
  4. Tulipa `Gorilla `
  5. Tulipa `Mary Ann`
  6. Tulipa `Mascotte`
  7. Tulipa `Parrot Texas Flame`
  8. Tulipa `Paul Scherer`
  9. Tulipa ` Ida`
  10. Tulipa `Rembrandt Grand Perfection`
  11. Tulipa `Shining Princess`
  12. Tulipa `Single Early Ravana`
  13. Tulipa `Triumph Gavota`
  14. Tulipa bakeri `Lilac Wonder`
  15. Tulipa clusiana `Cynthia`
  16. Tulipa clusiana `Eastern Star`
  17. Tulipa clusiana chrysantha
  18. Tulipa hageri `Little Beauty`
  19. Tulipa humilis `Alba Caerulea Oculata`
  20. Tulipa humilis `Alba Caerulea Oculata`
  21. Tulipa humilis `Lilliput`
  22. Tulipa humilis `Violacea Yellow Base`
  23. Tulipa humilis `Violacea Yellow Base`
  24. Tulipa linifolia
  25. Tulipa pulchella `Eastern Star`
  26. Tulipa polychroma
  27. Tulipa schrenkii
  28. Tulipa tarda
  29. Tulipa tarda `Dasystemom`

T (10)

  1. Tanacetum `Robinson`s Red`
  2. Thalictrum kuisianum
  3. Thalictrum `TNTNW Nimbus White`
  4. Thunbergia alata ` African Sunset`
  5. Tigridia pavonia
  6. Tricyrtis `Blue Wonder`
  7. Tricyrtis hirta
  8. Trollius europeus
  9. Trollius pumilus
  10. Tropaeolum majus

V (7)

  1. Vaccinium corymbosum `Bonus`
  2. Vaccinium corymbosum `Brigitta Blue`
  3. Vaccinium macrocarpon
  4. Vaccinium macrocarpon `McFarlin`
  5. Veronica `Tissington White`
  6. Veronica spicata
  7. Vitaliana primuliflora

W (3)

  1. Weigelia `Bouquet`
  2. Weigelia `Bristol Ruby`
  3. Wisteria floribunda `Multijuga`

Zinnia (4)

  1. Zinnia elegans
  2. Zinnia marylandica
  3. Zinnia marylandica `Starlight Rose`
  4. Zinnia marylandica `Sunburst`

Z (1)

  1. Zephyrantes robustus 

Plánujem pestovať: Armeria juniperifolia Lelekovice, Dryas octopetala var. minor, Saxifraga `Yellow `, Lilium michiganense, Tulipa `Tiny Timo`


Plants represent an extraordinary world that forms the foundation of our planet’s biodiversity. This diversity plays a crucial role in maintaining ecological balance. Natural plants exhibit a diverse morphology. Roots serve to anchor the plant in the soil and acquire nutrients. Stems support the plant and facilitate the transport of water and nutrients. Leaves are the primary organs of photosynthesis, where solar energy transforms into chemical energy. Flowers are the reproductive organs, while fruits contain seeds essential for the plant’s life cycle.

Plants undergo complex physiological processes that enable them to survive and thrive. Photosynthesis is a key process where plants utilize solar energy and carbon dioxide to produce organic matter, releasing oxygen into the atmosphere. Respiration, transpiration, and water conduction are other vital physiological processes ensuring the life and functionality of plants. Plants are fundamental building blocks of ecosystems, serving as the primary producers, aside from a minimal number of chemotrophic organisms. They provide habitat and sustenance for diverse animal species.

Additionally, plants possess the ability to regenerate soil and purify water from unwanted substances and toxins. They are an integral part of human civilization, offering us food in the form of fruits, vegetables, grains, and other crops. Many plants exhibit medicinal properties, contributing to traditional and modern medicine. Furthermore, plants hold cultural and aesthetic values expressed through gardens, art, and symbols.

With increasing human activity and climate changes, natural plants are often endangered. Biodiversity loss, invasive species, and deforestation pose significant threats. Hence, it is crucial to implement protective measures, including preserving natural habitats, maintaining genetic diversity, and adopting sustainable soil management practices. The intricate relationship between humans and natural plants underscores the importance of conserving and sustainably utilizing this rich biological diversity.


Pflanzen repräsentieren eine außergewöhnliche Welt, die die Grundlage für die Biodiversität unseres Planeten bildet. Diese Vielfalt spielt eine entscheidende Rolle bei der Aufrechterhaltung des ökologischen Gleichgewichts. Naturpflanzen weisen eine vielfältige Morphologie auf. Wurzeln dienen der Verankerung der Pflanze im Boden und der Aufnahme von Nährstoffen. Stängel unterstützen die Pflanze und erleichtern den Transport von Wasser und Nährstoffen. Blätter sind die Hauptorgane der Fotosynthese, bei der Sonnenenergie in chemische Energie umgewandelt wird. Blüten sind die Fortpflanzungsorgane, während Früchte Samen enthalten, die für den Lebenszyklus der Pflanze unerlässlich sind.

Pflanzen durchlaufen komplexe physiologische Prozesse, die es ihnen ermöglichen zu überleben und zu wachsen. Die Fotosynthese ist ein Schlüsselprozess, bei dem Pflanzen Sonnenenergie und Kohlendioxid nutzen, um organische Materie zu produzieren und Sauerstoff in die Atmosphäre abzugeben. Atmung, Transpiration und Wasserleitung sind weitere wichtige physiologische Prozesse, die das Leben und die Funktionalität von Pflanzen gewährleisten. Pflanzen sind grundlegende Bausteine von Ökosystemen und dienen als Hauptproduzenten, abgesehen von einer minimalen Anzahl von chemotrophen Organismen. Sie bieten Lebensraum und Nahrung für vielfältige Tierarten.

Darüber hinaus besitzen Pflanzen die Fähigkeit, den Boden zu regenerieren und Wasser von unerwünschten Substanzen und Toxinen zu reinigen. Sie sind ein integraler Bestandteil der menschlichen Zivilisation, indem sie uns Nahrung in Form von Früchten, Gemüse, Getreide und anderen Kulturen bieten. Viele Pflanzen weisen auch heilende Eigenschaften auf und tragen zur traditionellen und modernen Medizin bei. Darüber hinaus haben Pflanzen kulturelle und ästhetische Werte, die sich in Gärten, Kunst und Symbolen ausdrücken.

Mit zunehmender menschlicher Aktivität und Klimaveränderungen sind Naturpflanzen häufig gefährdet. Verlust der Biodiversität, invasive Arten und Entwaldung stellen erhebliche Bedrohungen dar. Daher ist es entscheidend, Schutzmaßnahmen zu ergreifen, einschließlich der Erhaltung natürlicher Lebensräume, der Aufrechterhaltung genetischer Vielfalt und der Einführung nachhaltiger Bodenbewirtschaftungspraktiken. Die komplexe Beziehung zwischen Menschen und Naturpflanzen unterstreicht die Bedeutung der Erhaltung und nachhaltigen Nutzung dieser reichen biologischen Vielfalt.


Plantae mirabilem mundum constituunt, qui biodiversitatis fundamentum in nostro planeta collocat. Haec varietas partes fundamentales agit in conservatione aequilibri oecologici. Plantae naturales morfologia varia praeditae sunt. Radices utuntur ad fixandam plantam in solo et ad nutrimenta quaerenda. Caules plantam sustentant et aquam ac nutrimina transferre adiuvant. Folia organa principales sunt photosynthesis, ubi energia solis in energiam chemicam convertitur. Flores sunt organa reproductionis, dum fructus semina continent, quae necessaria sunt pro novo vitae circulo.

Plantae processus physiologicos habent complexos, qui eis vitam et crescere permittunt. Photosynthesis processus clavis est, in quo plantae utuntur energia solis et carbonio dioxidum ad formandam materiam organicam, simul eliciunt oxygenium in atmosphaeram. Respiratio, transpiratio et aquae ductus processus physiologici importantes sunt, qui vitam et functionem plantarum securant. Plantae sunt fundamentales structurae in ecosysi, fungunturque tamquam productores principes, praeter paucissimos organismos chemotrophos. Praebent locum et cibum ad varietatem generum animalium.

Amplius, plantae possunt solum regenerare et aquam a substantiis noxiis et toxinis purgare. Sunt pars integralis civilisationis humanae, nobis cibum praebentes sub forma fructuum, vegetabilium, frumenti et aliarum frugum. Multae plantae etiam proprietates medicinales habent et ad medicinam traditionalem et modernam contribuunt. Praeterea, plantae valores culturales et aesthetico-historicos habent, qui in hortis, arte et symbolis exprimuntur.

Cum activitate humana crescente et mutationibus climaticis, plantae naturales saepe in periculo sunt. Perdita biodiversitatis, species invasivae et deforestatio magnae sunt minae. Idcirco, cruciale est sumere precautiones conservationis, inclusa conservatione habitatuum naturalium, manutentione diversitatis geneticæ et introductione agriculturae sanae. Complexa relatio inter homines et plantas naturales subliniat ponderationem conservationis et usus sostenibilis huius ricae biodiversitatis.

Cultivated flowers have a long history intertwined with human culture and are an integral part of our gardens and homes. Their beauty, fragrance, and symbolic significance make them more than just decorations – they are symbols of love, joy, peace, and many other emotions. Flowers add color, texture, and life; their beauty is a source of joy and pleasure, and their presence enlivens the space and gives it character. Many types of flowers have symbolic meanings and are associated with various emotions and events. Roses are symbols of love and romance, lilies represent purity and innocence, and sunflowers symbolize friendship and joyful thoughts. Flowers are often used to express condolences, celebrations, or gratitude. Flowers also have therapeutic effects. The presence of flowers in households or workspaces can improve mood, reduce stress and anxiety, and enhance creativity and productivity. Gardening or caring for flowers can also be a relaxing and therapeutic activity.


 

Príroda, Rastliny, Stromy, TOP, Organizmy, Fotografie

Stromy

Hits: 5387

, s ich výraznými kmeňmi a rozvetvenými korunami, tvoria obdivuhodné prírody a sú základnými stavebnými kameňmi ekosystémov po celom svete. Tieto živé sú neuveriteľne účinné, odolné a vytrvalé. Stromy čelia rôznym hrozbám, vrátane odlesňovania, klimatických zmien a chorôb. Odlesňovanie znižuje biodiverzitu a zvyšuje množstvo oxidu uhličitého v atmosfére. Klimatické môžu viesť k rozšíreniu chorôb a nežiaducich druhov, ktoré môžu poškodiť stromy. zahŕňa udržiavanie ich prirodzených biotopov, udržateľnú ťažbu dreva a podporu výskumu riešenie chorôb a škodcov. Stromy predstavujú kľúčový prvok prírody, ich a sú nevyhnutné pre ich , ale aj pre nás samotných, pre .

Stromy majú komplexnú štruktúru, ktorá im umožňuje prosperovať v rôznych podmienkach. Ich základnými časťami sú koreň, kmeň, , a . slúžia na zakotvenie stromu v pôde a , kým kmeň poskytuje oporu a nesie transportný systém pre vodu a . Konáre a listy zabezpečujú fotosyntézu, proces, ktorým stromy využívajú slnečné na tvorbu a výrobu kyslíka. Plody následne obsahujú semienka, ktoré slúžia na reprodukciu. Stromy tvoria rozsiahle ekosystémy, ktoré poskytujú útočisko a potravu pre množstvo živočíchov. Ich kmeň a konáre slúžia ako príbytok pre vtáky, hmyz a iné organizmy. Stromy napomáhajú udržiavať pôdnu kvalitu a zabezpečujú mikroklímu vo svojom okolí. Ich význam v ekosystémoch spočíva aj v zachytávaní a ukladaní oxidu uhličitého. Stromy majú aj ekonomický význam, poskytujú , ktoré sa využíva vo viacerých odvetviach, od stavebníctva po výrobu nábytku. Okrem toho poskytujú suroviny pre . Mnohé a liečivé látky pochádzajú zo stromov, ktoré majú aj kozmetické a farmaceutické využitie.

stromov majú schopnosť zachytiť nádheru a pôsobivosť prírody v jedinom snímku. Každý strom, s jeho jedinečným tvarom a charakterom, ponúka fotografom nekonečné možnosti tvorby. Fotografická interpretácia stromov môže prezentovať ich , a vzťah s okolím. Pri fotografovaní stromov je dôležitá a . Vytváranie kontrastov medzi stromami a inými prvkami prírody, ako sú hory, jazero alebo , môže pridať fotografii. s rôznymi uhlovými pohľadmi, vrátane nízkych záberov alebo fotografovania viacerých konárov, môže poskytnúť nezvyčajné a pútavé Svetlo hrá kľúčovú úlohu pri fotografovaní stromov. Ranné alebo večerné môžu vytvárať hrejivé a mäkké , ktoré zdôrazňujú textúru kôry a listov. Kontrastné svetlo vytvára tieňov. Zábery s nápadnými slnečnými lúčmi či odleskmi môžu poskytnúť nádherný a pôsobivý efekt. Hmla dokáže oddeliť a nechať vyniknúť aj niečo tak veľké ako je strom.

niekedy nezachytávajú len samotné , ale aj pestrosť ich okolia. Zahrnúť rôznorodé druhy rastlín, kvetov či prírodných prvkov do môže pridať ďalší rozmer a kontrast. Rovnako môžete zachytiť , alebo iné , ktoré sú spojené so životom stromov. Existuje mnoho zvláštnych a nápadných druhov stromov, ktoré môžu byť zaujímavým objektom pre fotografie. , , alebo s výraznými tvarmi a vekom môžu byť vynikajúcim motívom. Ich výrazné môžu vyprávať príbehy o histórii a živote v ich okolí. Kombinácia , kreativity a v každom jednotlivom strome môže viesť k tvorbe úžasných a dojemných fotografií.


Trees, with their distinctive trunks and branching crowns, stand as remarkable masterpieces of nature and serve as fundamental building blocks of ecosystems worldwide. These living organisms are incredibly efficient, resilient, and enduring. However, trees face various threats, including deforestation, climate change, and diseases. Deforestation reduces biodiversity and increases the amount of carbon dioxide in the atmosphere. Climate changes may lead to the spread of diseases and unwanted species that can harm trees. Protecting trees involves maintaining their natural habitats, sustainable timber harvesting, and supporting research to address diseases and pests. Trees represent a key element of nature; their conservation and sustainable management are essential not only for their preservation but also for humanity.

Trees have a complex structure that enables them to thrive in various conditions. Their basic parts include roots, trunk, branches, leaves, and fruits. Roots anchor the tree in the soil and absorb nutrients, while the trunk provides support and houses the transport system for water and nutrients. Branches and leaves facilitate photosynthesis, the process by which trees use sunlight to produce energy and generate oxygen. Fruits contain seeds used for reproduction. Trees form extensive ecosystems that provide shelter and food for numerous organisms. Their trunks and branches serve as habitats for birds, insects, and other creatures. Trees help maintain soil quality and create a microclimate in their surroundings. Their significance in ecosystems also lies in capturing and storing carbon dioxide. Trees have economic importance, providing wood used in various industries, from construction to furniture production. Additionally, they supply raw materials for the paper industry, and many plants and medicinal compounds come from trees, contributing to cosmetic and pharmaceutical applications.

Photographing trees allows for the capture of the beauty and grandeur of nature in a single frame. Each tree, with its unique and character, offers photographers endless creative possibilities. The photographic interpretation of trees can showcase their majesty, resilience, and relationship with the environment. Composition and perspective play a crucial role in tree photography. Creating contrasts between trees and other elements of nature, such as mountains, lakes, or the sky, can add drama to the photograph. Experimenting with different angles, including low shots or capturing multiple branches, can yield unusual and captivating results. Light is a key factor in tree photography. Early morning or evening hours can create warm and soft lights that highlight the texture of the bark and the colors of the leaves. Contrastive light creates shadow play, adding drama to the image. Shots with striking sunlight rays or reflections can provide a beautiful and impactful effect. Fog can separate spaces and make even something as large as a tree stand out.

Tree photography sometimes captures not only the trees themselves but also the diversity of their surroundings. Including various plant species, flowers, or natural elements in the composition can add another dimension and color contrast. Likewise, capturing birds, insects, or other wildlife associated with tree life enhances the richness of the photograph. Many tree species stand out for their uniqueness and interest. Bonsai, sequoias, or ancient trees with distinctive shapes and age can be excellent subjects. Their remarkable features can tell stories about history and life in their environment. The combination of technique, creativity, and appreciation of beauty in each individual tree can lead to the creation of fascinating and poignant photographs.


Bäume, mit ihren markanten Stämmen und verzweigten Kronen, sind bemerkenswerte Meisterwerke der Natur und dienen als grundlegende Bausteine von Ökosystemen weltweit. Diese lebenden Organismen sind unglaublich effizient, widerstandsfähig und langlebig. Bäume sehen sich jedoch verschiedenen Bedrohungen gegenüber, einschließlich Abholzung, Klimawandel und Krankheiten. Abholzung verringert die Artenvielfalt und erhöht die Menge an Kohlendioxid in der Atmosphäre. Klimaveränderungen können zur Ausbreitung von Krankheiten und unerwünschten Arten führen, die den Bäumen schaden können. Der Schutz von Bäumen umfasst die Aufrechterhaltung ihrer natürlichen Lebensräume, nachhaltige Holzernte und die Unterstützung von Forschung zur Bewältigung von Krankheiten und Schädlingen. Bäume stellen ein Schlüsselelement der Natur dar; ihre Erhaltung und nachhaltige Bewirtschaftung sind nicht nur für ihre Bewahrung, sondern auch für die Menschheit unerlässlich.

Bäume haben eine komplexe Struktur, die es ihnen ermöglicht, in verschiedenen Umgebungen zu gedeihen. Ihre grundlegenden Teile umfassen Wurzeln, Stamm, Äste, Blätter und Früchte. Wurzeln verankern den Baum im Boden und nehmen Nährstoffe auf, während der Stamm Unterstützung bietet und das Transportsystem für Wasser und Nährstoffe beherbergt. Äste und Blätter erleichtern die Photosynthese, den Prozess, bei dem Bäume Sonnenlicht zur Energieproduktion und Sauerstoffgewinnung nutzen. Früchte enthalten Samen, die zur Fortpflanzung dienen. Bäume bilden umfangreiche Ökosysteme, die Unterschlupf und Nahrung für zahlreiche Organismen bieten. Ihre Stämme und Äste dienen als Lebensraum für Vögel, Insekten und andere Kreaturen. Bäume tragen zur Erhaltung der Bodenqualität bei und schaffen ein Mikroklima in ihrer Umgebung. Ihre Bedeutung in Ökosystemen besteht auch darin, Kohlendioxid zu erfassen und zu speichern. Bäume haben auch wirtschaftliche Bedeutung und liefern Holz, das in verschiedenen Branchen, vom Bauwesen bis zur Möbelproduktion, verwendet wird. Darüber hinaus liefern sie Rohstoffe für die Papierindustrie, und viele Pflanzen und Heilmittel stammen von Bäumen und werden in kosmetischen und pharmazeutischen Anwendungen verwendet.

Die Fotografie von Bäumen ermöglicht es, die Schönheit und Erhabenheit der Natur in einem einzigen Bild festzuhalten. Jeder Baum mit seiner einzigartigen Form und seinem Charakter bietet Fotografen endlose kreative Möglichkeiten. Die fotografische Interpretation von Bäumen kann ihre Majestät, Widerstandsfähigkeit und Beziehung zur Umwelt zeigen. Komposition und Perspektive spielen eine entscheidende Rolle in der Baumfotografie. Der Schaffung von Kontrasten zwischen Bäumen und anderen Elementen der Natur, wie Bergen, Seen oder dem Himmel, kann Dramatik verliehen werden. Das Experimentieren mit verschiedenen Winkeln, einschließlich niedriger Aufnahmen oder dem Fotografieren mehrerer Äste, kann ungewöhnliche und fesselnde Ergebnisse erzielen. Licht spielt eine Schlüsselrolle bei der Fotografie von Bäumen. Frühe Morgen- oder Abendstunden können warme und weiche Lichter erzeugen, die die Textur der Rinde und die Farben der Blätter betonen. Kontrastreiches Licht erzeugt Schattenspiele. Aufnahmen mit auffälligen Sonnenstrahlen oder Reflexionen können einen wunderschönen und beeindruckenden Effekt erzielen. Nebel kann Räume trennen und sogar etwas so Großes wie einen Baum hervorheben.

Die Fotografie von Bäumen erfasst manchmal nicht nur die Bäume selbst, sondern auch die Vielfalt ihrer Umgebung. Das Einbeziehen verschiedener Pflanzenarten, Blumen oder natürlicher Elemente in die Komposition kann eine weitere Dimension und Farbkontrast hinzufügen. Ebenso kann das Erfassen von Vögeln, Insekten oder anderem Wildleben, das mit dem Baumleben verbunden ist, die Reichhaltigkeit des Fotos erhöhen. Viele Baumarten zeichnen sich durch ihre Einzigartigkeit und Besonderheit aus. Bonsai, Mammutbäume oder alte Bäume mit ausgeprägten Formen und Alter können hervorragende Motive sein. Ihre bemerkenswerten Merkmale können Geschichten über die Geschichte und das Leben in ihrer Umgebung erzählen. Die Kombination von Technik, Kreativität und dem Verständnis für die Schönheit jedes einzelnen Baumes kann zu faszinierenden und bewegenden Fotografien führen.


Príroda, Rastliny, Akvaristika, Biológia, Organizmy, Fotografie

Vodné rastliny

Hits: 52964

Vodné rastliny sa líšia od suchozemských rastlín, sú adaptované na prostredie pod vodou. vodných rastlín majú aj na vrchnej, aj na spodnej strane – takpovediac dýchajú oboma „stranami“ na rozdiel od suchozemských rastlín. Povrch suchozemských rastlín tvorí , u rastlín vodných takmer u všetkých druhov chýba. Pravdepodobne by najmä bránila difúzii plynov. Plávajúce rastliny obyčajne nezakoreňujú, ani tie, ktoré žijú na hladine. sú čo do tvaru obdobné ako pri suchozemských druhoch. Do dôsledkov nemožno brať za každých okolností vodu ako bariéru, pretože sú vodné rastliny, ktoré aj v prirodzených podmienkach vyrastajú nad hladinu, resp. rastú v močarinách s nízkou hladinou vo veľkom vlhku. Aj v akvaristike sa zaužíval pojem submerzná forma a emerzná forma rastliny. Submerzná forma rastie pod hladinou vody, emerzná forma nad hladinou. Jednotlivé formy sa často líšia, okrem iného tvarom, aj farbou. V praxi je v drvivej väčšine používané nepohlavné rozmnožovanie rastlín – odrezkami, poplazmi, výhonkami apod. Submerzná forma môže aj v akváriu vyrásť do emerznej formy – často napr. Echinodorus. Ak je nádrž pre rastlinu príliš nízka, často si nájde cestu von. Avšak aj vodná rastlina kvitne a často veľmi podobne ako suchozemské druhy. Kvet tvorí niekedy pod hladinou, častejšie nad jej povrchom. Pohlavné množenie rastlín nie je vylúčené, ale je problematické a je skôr prácou pre špecialistu. Vodné rastliny sú väčšinou zelené, niekedy červené, fialové, hnedočervené. Existuje množstvo druhov vodných rastlín.


Aquatic plants differ from terrestrial plants; they are adapted to the underwater environment. The leaves of aquatic plants have stomata on both the upper and lower surfaces – they breathe through both „sides,“ unlike terrestrial plants. The surface of terrestrial plants is covered with a cuticle, which is almost absent in almost all species of aquatic plants. would likely hinder gas diffusion. Floating plants usually do not root, even those that live on the water surface. The roots are similar in shape to those of terrestrial species. The consequences cannot always be taken as a barrier, as there are aquatic plants that grow above the water surface in natural conditions or grow in marshes with low water levels but high humidity. In aquariums, the terms submerged form and emerged form of plants are common. The submerged form grows underwater, while the emerged form grows above the water. The individual forms often differ in shape and color. In practice, vegetative propagation of plants is widely used – by cuttings, runners, shoots, etc. The submerged form can grow into the emerged form in an aquarium – often seen in plants like Echinodorus. If the tank is too low for the plant, it often finds its way out. However, aquatic plants also bloom, often very similar to terrestrial species. The flower sometimes forms below the water surface, more often above it. Sexual reproduction of plants is not excluded but is problematic and is rather a task for a specialist. Aquatic plants are mostly green, sometimes red, purple, or reddish-brown. There are numerous species of aquatic plants.


Wasserpflanzen unterscheiden sich von Landpflanzen; sie sind an die Unterwasserumgebung angepasst. Die Blätter von Wasserpflanzen haben Stomata auf sowohl der oberen als auch der unteren Oberfläche – sie atmen durch beide „Seiten“, im Gegensatz zu Landpflanzen. Die Oberfläche von Landpflanzen ist mit einer Cuticula bedeckt, die bei fast allen Arten von Wasserpflanzen fast nicht vorhanden ist. Sie würde wahrscheinlich die Gasdiffusion behindern. Schwimmende Pflanzen wurzeln normalerweise nicht, auch nicht diejenigen, die auf der Wasseroberfläche leben. Die Wurzeln ähneln in ihrer Form denen terrestrischer Arten. Die Konsequenzen können nicht immer als Barrieren angesehen werden, da es Wasserpflanzen gibt, die in natürlichen Bedingungen über der Wasseroberfläche wachsen oder in Sümpfen mit niedrigem Wasserstand, aber hoher Luftfeuchtigkeit wachsen. In Aquarien sind die Begriffe „submerse Form“ und „emerse Form“ von Pflanzen verbreitet. Die submerse Form wächst unter Wasser, während die emerse Form über dem Wasser wächst. Die einzelnen Formen unterscheiden sich oft in Form und Farbe. In der Praxis wird die vegetative Vermehrung von Pflanzen weit verbreitet – durch Stecklinge, Ausläufer, Triebe usw. Die submerse Form kann sich in die emerse Form in einem Aquarium entwickeln – oft bei Pflanzen wie Echinodorus zu beobachten. Wenn das Becken für die Pflanze zu niedrig ist, findet sie oft einen Weg nach draußen. Wasserpflanzen blühen auch, oft sehr ähnlich wie terrestrische Arten. Die Blume bildet sich manchmal unter der Wasseroberfläche, häufiger darüber. Die sexuelle Vermehrung von Pflanzen ist nicht ausgeschlossen, aber problematisch und eher eine Aufgabe für einen Spezialisten. Wasserpflanzen sind meistens grün, manchmal rot, lila oder rötlich-braun. Es gibt zahlreiche Arten von Wasserpflanzen.


Svetlo je dôležitým faktorom pre rastliny – sú druhy tieňomilné, napr. Microsorium, Vesicularia, druhy svetlomilné, napr. Salvinia, Pistia. Rozdiely sú aj v otázke optimálnej teploty. Sú druhy, ktoré pri relatívne malom rozdiely teploty rastú evidentne inak. Listy sú hustejšie pri sebe v chladnejšej vode, farba listov je tmavšia apod. Väčšina vodných akváriových rastlín má pomerne úzky rozsah teploty, v ktorej žijú. Niektoré akváriové druhy znesú naozaj veľmi nízke teploty, podobné už aj našim studenovodným prírodným podmienkam mierneho pásma. Na rastliny takisto vplýva prúdenie vody. Niektoré druhy sú stavané na stojaté vody, niektoré na rýchlo tečúce toky. V akváriu je zdrojom prúdov vody najmä filter a . Prúdenie vody značne ovplyvňuje dekorácia, svoju úlohu zohráva aj sklon, reliéf dna. Rovné dno dáva silnejšiemu prúdeniu. Na rastliny veľmi neblaho vplývajú liečivá používané v akvaristike. Ich negatívny účinok je bohužiaľ dlhodobý. Ak máme možnosť, presaďme aspoň časť rastlín do inej počas liečby. Aj to je dôvod na zriadenie samostatnej karanténnej nádrže. Po použití liečiv je možné použiť aktívne uhlie. Rastliny akvaristi presádzajú. najčastejšie k tomu dochádza pri vegetatívnom rozmnožovaní.


Light is an important factor for plants – there are shade-tolerant species, for example, Microsorium, Vesicularia, and light-loving species, for example, Salvinia, Pistia. Differences also exist in terms of the optimal temperature. There are species that clearly grow differently with relatively small temperature differences. Leaves are denser together in cooler water, and the color of the leaves is darker, etc. Most aquatic aquarium plants have a relatively narrow temperature range in which they live. Some aquarium species can tolerate very low temperatures, similar to the cold-water conditions of our temperate zone. Water flow also affects plants. Some species are adapted to stagnant water, while others prefer fast-flowing streams. In the aquarium, the main sources of water flow are the filter and aeration. Water flow significantly influences decoration, and the slope and relief of the bottom also play a role. A flat bottom creates stronger currents. Medications used in aquaristics have a very negative effect on plants, unfortunately, their negative impact is long-lasting. If possible, transplant at least some of the plants to another tank during treatment. This is also a reason to set up a separate quarantine tank. After using medications, activated carbon can be used. Aquarium enthusiasts often transplant plants, usually during vegetative propagation.


Licht ist ein wichtiger Faktor für Pflanzen – es gibt schattenliebende Arten wie Microsorium, Vesicularia und lichtliebende Arten wie Salvinia, Pistia. Es gibt auch Unterschiede hinsichtlich der optimalen Temperatur. Es gibt Arten, die sich bei relativ geringen Temperaturunterschieden deutlich anders entwickeln. Blätter sind dichter beieinander in kühlerem Wasser, die Farbe der Blätter ist dunkler usw. Die meisten Wasserpflanzen im Aquarium haben einen relativ engen Temperaturbereich, in dem sie leben. Einige Aquarienarten können sehr niedrige Temperaturen tolerieren, ähnlich wie die Kaltwasserbedingungen unserer gemäßigten Zone. Auch der Wasserfluss beeinflusst Pflanzen. Einige Arten sind an stehendes Wasser angepasst, während andere schnell fließende Ströme bevorzugen. Im Aquarium sind die Hauptquellen für Wasserströmung der Filter und die Belüftung. Die Wasserströmung beeinflusst die Dekoration erheblich, und die Neigung und das Relief des Bodens spielen ebenfalls eine Rolle. Ein flacher Boden erzeugt stärkere Strömungen. Medikamente, die in der Aquaristik verwendet werden, haben leider einen sehr negativen Einfluss auf Pflanzen, und ihr negativer Einfluss ist leider langanhaltend. Wenn möglich, verpflanzen Sie während der Behandlung zumindest einige Pflanzen in ein anderes Becken. Dies ist auch ein Grund für die Einrichtung eines separaten Quarantänebeckens. Nach der Anwendung von Medikamenten kann Aktivkohle verwendet werden. Aquarianer transplantieren Pflanzen oft, meist während der vegetativen Vermehrung.


Väčšie materské rastliny neodporúčam často presádzať. Rastliny môžu byť aj zdrojom potravy pre , slimáky apod., čo je však väčšinou nežiaduce. Často sa na elimináciu rias používajú mladé prísavníky. Pokiaľ sú malé svoju úlohu plnia poctivo, no väčšie sa radšej pustia do rastlín. Slimáky dokážu takisto požierať riasy, najmä ak majú inej potravy, vedia sa však pustiť aj do rastlín. Najrozšírenejšie ampulárie rastliny nežerú. V akváriu svietime umelým svetlom, osvetlenia by mala byť taká ako v ich domovine. Dôležité rovnako je dodržiavať pravidelnosť, 12-14 hodinový interval je nutný. Závisí od umiestnenia, od toho či sme v tmavej miestnosti, aká je dĺžka denného svetla a koľko ho slnko poskytuje. Denné svetlo má inú kvalitu ako umelé svetlo, dá sa mu iba prispôsobiť. Druhy sú prispôsobené rôznemu prostrediu. Vodné rastliny, napokon rovnako ako aj ich suchozemské príbuzné menia svoj v závislosti od striedania dňa a noci. Je to ich vlastný prirodzený biorytmus. Rastliny cez deň prijímajú svetlo, CO2, tvoria organickú hmotu a ako vedľajší produkt tvoria kyslík. Tejto reakcii vravíme fotosyntéza.


I don’t recommend transplanting larger mother plants frequently. Plants can also be a source of food for fish, snails, etc., which is usually undesirable. Young suction snails are often used to eliminate algae. If they are small, they do their job diligently, but larger ones tend to go after the plants instead. Snails can also consume algae, especially if they lack other food, but they can also target plants. The most common apple snails do not eat plants. In the aquarium, we use artificial light, and the length of illumination should be similar to their natural habitat. It’s equally important to maintain regularity; a 12-14 hour interval is necessary. It depends on the placement, whether we are in a dark room, the length of daylight, and how much sunlight is available. Natural light has a different quality than artificial light; it can only be adapted to. Species are adapted to different environments. Water plants, just like their terrestrial relatives, change their metabolism depending on the alternation of day and night. It’s their own natural biorhythm. During the day, plants absorb light, CO2, produce organic matter, and as a by-product, produce oxygen. This process is called photosynthesis.


Größere Mutterpflanzen sollte man nicht häufig umsetzen. Pflanzen können auch eine Nahrungsquelle für Fische, Schnecken usw. sein, was jedoch in der Regel unerwünscht ist. Junge Saugschnecken werden oft zur Beseitigung von Algen eingesetzt. Wenn sie klein sind, erledigen sie ihre Aufgabe gewissenhaft, aber größere gehen lieber an die Pflanzen. Schnecken können auch Algen fressen, besonders wenn ihnen andere Nahrung fehlt, aber sie können auch Pflanzen angreifen. Die am weitesten verbreiteten Apfelschnecken fressen keine Pflanzen. Im Aquarium verwenden wir künstliches Licht, und die Beleuchtungsdauer sollte ähnlich wie in ihrem natürlichen Lebensraum sein. Es ist ebenso wichtig, die Regelmäßigkeit einzuhalten; ein Intervall von 12-14 Stunden ist notwendig. Es hängt von der Platzierung ab, ob wir uns in einem dunklen Raum befinden, wie lang das Tageslicht ist und wie viel Sonnenlicht verfügbar ist. Natürliches Licht hat eine andere Qualität als künstliches Licht; es kann nur angepasst werden. Arten sind an verschiedene Umgebungen angepasst. Wasserpflanzen ändern ebenso wie ihre terrestrischen Verwandten ihren Stoffwechsel je nach Wechsel von Tag und Nacht. Es ist ihr eigener natürlicher Biorhythmus. Tagsüber nehmen Pflanzen Licht, CO2 auf, produzieren organische Substanz und produzieren als Nebenprodukt Sauerstoff. Dieser Prozess wird Photosynthese genannt.


V noci naopak rastliny prijímajú – rastliny dýchajú a vylučujú do vody CO2. Rastliny však dýchajú aj cez deň, prevláda však príjem CO2. Vplyvom dýchania rastlín v noci – produkcie CO2 sa v akváriu zvyšuje. stúpa s tvrdosťou vody, teplotou vody a klesá s pH. Medzi základné funkcie rastlín patrí hmoty. je usadená vrstva odpadu, výkalov rýb, slimákov apod., ktoré je nutné rozložiť. Tento proces, ktorý uskutočňujú mikroorganizmy, najmä . Rastliny hrajú pritom dôležitú úlohu, pretože niektoré látky dokážu odbúravať aj ony, ale v každom prípade už mineralizované látky sú zdrojom výživy pre ne. Niektoré korene tvoria podobne ako listy (zelené časti rastlín) kyslík, no za normálnych podmienok každá rastlina tvorí malé množstvo kyslíka, ktoré napomáha aeróbnej redukcii hmoty okolo nich. Niektoré druhy dokážu obzvlášť dobre odčerpávať z vody živiny, ktoré sú pre akvaristu žiadané, napr. je ideálnym biologickým prostriedkom na zníženie hladiny dusičnanov. Podobnými schopnosťami oplýva Ceratophyllum demersum. Obdobne Anacharis densa efektívne odčerpáva z vody vápnik. Tieto látky rastliny viažu do svojich pletív a začleňujú sa do ich fyziologických pochodov. Vzhľadom na to, že často ide o látky pre nás akvaristov nie príliš vítané, je táto schopnosť cenná.


At night, on the other hand, plants absorb oxygen – plants respire and release CO2 into the water. However, plants also respire during the day, but CO2 uptake prevails. Due to the respiration of plants at night – the production of CO2, the pH in the aquarium increases. The concentration of CO2 rises with water hardness, water temperature, and decreases with pH. One of the basic functions of plants is the mineralization of matter. Detritus is a layer of sediment composed of waste, fish excrement, snails, etc., which needs to be broken down. This process is carried out by microorganisms, especially bacteria. Plants play an important role in this process because they can also break down some substances, but in any case, already mineralized substances are a source of nutrition for them. Some roots, like leaves (green parts of plants), produce oxygen, but under normal conditions, each plant produces a small amount of oxygen that contributes to the aerobic reduction of matter around them. Some species are particularly good at removing nutrients from the water, which are desired by aquarists, e.g., Riccia fluitans is an ideal biological agent for reducing nitrate levels. Similarly, Ceratophyllum demersum possesses similar abilities. Likewise, Anacharis densa effectively removes calcium from the water. Plants bind these substances into their tissues and incorporate them into their physiological processes. Since these substances are often unwelcome for us aquarists, this ability is valuable.


Nachts nehmen Pflanzen jedoch Sauerstoff auf – Pflanzen atmen und geben CO2 ins Wasser ab. Pflanzen atmen jedoch auch tagsüber, aber die CO2-Aufnahme überwiegt. Aufgrund der Atmung von Pflanzen in der Nacht – der CO2-Produktion steigt der pH-Wert im Aquarium. Die Konzentration von CO2 steigt mit der Wasserhärte, der Wassertemperatur und sinkt mit dem pH-Wert. Eine der grundlegenden Funktionen von Pflanzen ist die Mineralisierung von Stoffen. Detritus ist eine Schicht aus Sedimenten, die aus Abfällen, Fischausscheidungen, Schnecken usw. besteht und abgebaut werden muss. Dieser Prozess wird von Mikroorganismen, insbesondere Bakterien, durchgeführt. Pflanzen spielen dabei eine wichtige Rolle, da sie auch einige Substanzen abbauen können, aber in jedem Fall bereits mineralisierte Substanzen eine Nahrungsquelle für sie sind. Einige Wurzeln, wie Blätter (grüne Teile von Pflanzen), produzieren Sauerstoff, aber unter normalen Bedingungen produziert jede Pflanze eine kleine Menge Sauerstoff, die zur aeroben Reduktion von Stoffen um sie herum beiträgt. Einige Arten sind besonders gut darin, Nährstoffe aus dem Wasser zu entfernen, die von Aquarianern gewünscht werden, z.B. ist Riccia fluitans ein ideales biologisches Mittel zur Reduzierung des Nitratgehalts. Ähnlich verhält es sich mit Ceratophyllum demersum. Ebenso entfernt Anacharis densa effektiv Calcium aus dem Wasser. Pflanzen binden diese Substanzen in ihre Gewebe und integrieren sie in ihre physiologischen Prozesse. Da diese Substanzen für uns Aquarianer oft unerwünscht sind, ist diese Fähigkeit wertvoll.


Vplyv filtrovania a najmä vzduchovania na rast rastlín je viac-menej negatívny. Nedá sa to jednoznačne povedať, ale filtrovanie, ktoré čerí hladinu, a teda aj vzduchovanie je pre rast rastlín nežiaduce, preto to nepreháňajme. Udržiavať akvárium celkom bez filtrácie nechajme radšej na špecialistov, ja sám mám niekoľko takých akvárií. Rastliny však môžu meniť aj farbu. Vodné rastliny, ostatne podobne ako ich suchozemské príbuzné, oplývajú vďaka chlorofylu predovšetkým zeleným sfarbením. Avšak aj jeden jedinec môže vykazovať v priebehu ontogenézy zmeny. Fialová farba inak zelených rastlín má príčinu vo veľkom množstve svetla, živín.


The influence of filtration and especially aeration on plant growth is more or less negative. It cannot be said definitively, but filtration that draws from the surface, and thus aeration as well, is undesirable for plant growth, so let’s not overdo it. Let’s leave the task of keeping an aquarium completely without filtration to the specialists; I myself have several such aquariums. However, plants can also change color. Aquatic plants, much like their terrestrial relatives, primarily exhibit green coloration due to chlorophyll. However, even an individual can undergo changes during ontogeny. The purple color of otherwise green plants is due to a large amount of light and nutrients.


Der Einfluss von Filtration und insbesondere Belüftung auf das Pflanzenwachstum ist mehr oder weniger negativ. Es lässt sich nicht eindeutig sagen, aber Filtration, die von der Oberfläche absaugt, und somit auch Belüftung, sind für das Pflanzenwachstum unerwünscht, daher sollten wir es nicht übertreiben. Das Halten eines Aquariums komplett ohne Filtration sollten wir lieber den Fachleuten überlassen; Ich selbst habe mehrere solcher Aquarien. Pflanzen können jedoch auch ihre Farbe ändern. Wasserpflanzen, ähnlich wie ihre terrestrischen Verwandten, zeigen vor allem durch Chlorophyll eine grüne Färbung. Einzelne Exemplare können jedoch während der Ontogenese Veränderungen aufweisen. Die violette Farbe ansonsten grüner Pflanzen ist auf eine große Menge Licht und Nährstoffe zurückzuführen.


V prvom rade by sme mali dodržať, že veľké jedince (druhy) sadíme dozadu a menšie dopredu. Vyvarujme sa tiež sadeniu presne do stredu nádrže. Rovnako s citom narábajme so symetriou. Korene skrátime ostrými nožničkami na 1 – 2 cm (nie u rodu Anubias, ) a pri sadení sa vyvarujme ich poškodeniu. Všetky korene by mali byť v dne, žiadne trčiace korene nie sú žiaduce. Pri niektorý rastlinách, ktoré majú koreňový systém dobre vyvinutý, napr. Echinodorus, zasadenú rastlinu po zasadení mierne povytiahneme – koreňový krčok by mal trošku vyčnievať. V prípade odrezkov je vhodné, aby sme zasadili rastlinu tak, aby sme nesadili holú stonku, ale aby doslova spodné listy boli zafixované do dna. Vodná rastliny tak získa oporu, bude mať oveľa lepšiu stavbu. Plávajúce rastliny hladiny , Pistia, Riccia, Salvinia voľne pokladáme na hladinu, iné plávajúce rastliny voľne hodíme do vody. Niektoré z nich sú schopné zakoreniť, avšak nie dlhodobo. Riccia napr. sa dá celkom efektne použiť ako koberec na dno. Keďže sama ma tendenciu vyplávať na hladinu, je nutné ju nejako zachytiť – napr. o ploché . Microsorium, Anubias sa pripevňujú ku drevu, na filter. Najvhodnejšia na to je spletaná šnúra z rybárskeho obchodu. Ak kúpime rastliny v obchode, pravdepodobne budú zasadené v košíkoch a v minerálnej vate. Tieto sa do nehodia, najmä nie skalná vata, preto vodné rastliny vyberieme z košíkov a zbavíme ich predovšetkým minerálnej vaty. rastlín, Rastliny sa získavajú energiu viacerými spôsobmi. Ich prirodzeným zdrojom je CO2 – oxid uhličitý a svetlo. Stačí si spomenúť na fotosyntézu zo školy. Ak majú rastliny , nedokážu ho zužitkovať pri nedostatku svetla. Ak rastliny majú , pri deficite CO2 ho nedokážu dostatočne využiť. Ak však sú obe optimálne, je to veľký predpoklad pre veľmi úspešný rast našich rastlín. V poradí dôležitosti by som svetlo postavil pred CO2. Pre úspešný rast rastlín treba kvalitné osvetlenie.


Planting of plants

of all, we should keep in mind that large specimens (species) should be planted in the back and smaller ones in the front. Also, let’s avoid planting exactly in the center of the tank. Likewise, symmetry with care. Trim the roots with sharp scissors to 1-2 cm (not for the genus Anubias, Cryptocoryne), and when planting, avoid damaging them. All roots should be in the substrate; no exposed roots are desirable. For some plants with a well-developed root system, such as Echinodorus, gently lift the planted plant after planting – the root collar should protrude slightly. In the case of cuttings, it is advisable to plant the plant so that we do not plant a bare stem, but so that the lower leaves are literally fixed into the substrate. Water plants will thus gain support and have a much better structure. Floating plants such as Limnobium, Pistia, Riccia, Salvinia are freely placed on the surface, while other floating plants are simply dropped into the water. Some of them are capable of rooting, but not long-term. For example, Riccia can be quite effectively used as a carpet on the bottom. Since it tends to float to the surface, it is necessary to somehow anchor it – for example, with flat stones. Microsorium, Anubias are attached to wood, to the filter. The most suitable for this is a braided string from a fishing shop. If we buy plants in a store, they will probably be planted in baskets and mineral wool. These are not suitable for the aquarium, especially not wool, so we remove water plants from the baskets and remove them from mineral wool. Plants obtain energy in several ways. Their natural source of energy is CO2 – carbon dioxide and light. Just remember photosynthesis from school. If plants have enough CO2, they cannot utilize it in the absence of light. If plants have enough light, in the absence of CO2, they cannot utilize it sufficiently. However, if both values are optimal, it is a great prerequisite for the very successful growth of our plants. In terms of importance, I would place light before CO2. Quality lighting is essential for successful plant growth.


Pflanzung von Pflanzen

Zunächst sollten wir beachten, dass große Exemplare (Arten) hinten und kleinere vorne gepflanzt werden sollten. Vermeiden wir auch das Pflanzen genau in die Mitte des Tanks. Gehen wir auch mit Symmetrie sorgsam um. Schneiden Sie die Wurzeln mit scharfen Scheren auf 1-2 cm (nicht für die Gattung Anubias, Cryptocoryne), und beim Pflanzen vermeiden Sie es, sie zu beschädigen. Alle Wurzeln sollten im Substrat sein; keine freiliegenden Wurzeln sind erwünscht. Für einige Pflanzen mit gut entwickeltem Wurzelsystem, wie Echinodorus, heben Sie die gepflanzte Pflanze nach dem Pflanzen vorsichtig an – der Wurzelkragen sollte leicht herausragen. Im Fall von Stecklingen ist es ratsam, die Pflanze so zu pflanzen, dass wir keinen nackten Stängel pflanzen, sondern dass die unteren Blätter buchstäblich ins Substrat eingebettet sind. Wasserpflanzen gewinnen so Unterstützung und haben eine viel bessere Struktur. Schwimmende Pflanzen wie Limnobium, Pistia, Riccia, Salvinia werden frei auf die Oberfläche gelegt, während andere Schwimmpflanzen einfach ins Wasser geworfen werden. Einige von ihnen sind in der Lage zu wurzeln, aber nicht langfristig. Zum Beispiel kann Riccia recht effektiv als Teppich auf dem Boden verwendet werden. Da es dazu neigt, an die Oberfläche zu steigen, ist es notwendig, es irgendwie zu verankern – zum Beispiel mit flachen Steinen. Microsorium, Anubias werden an Holz, an den Filter befestigt. Am besten geeignet dafür ist ein geflochtener Faden aus einem Angelgeschäft. Wenn wir Pflanzen im Laden kaufen, werden sie wahrscheinlich in Körben und Mineralwolle gepflanzt sein. Diese sind für das Aquarium nicht geeignet, insbesondere keine Steinwolle, also nehmen wir Wasserpflanzen aus den Körben und entfernen sie von Mineralwolle. Pflanzen erhalten Energie auf verschiedene Arten. Ihre natürliche Energiequelle ist CO2 – Kohlendioxid und Licht. Erinnern Sie sich einfach an die Photosynthese aus der Schule. Wenn Pflanzen genügend CO2 haben, können sie es im Fehlen von Licht nicht nutzen. Wenn Pflanzen genügend Licht haben, können sie es im Fehlen von CO2 nicht ausreichend nutzen. Wenn jedoch beide Werte optimal sind, ist dies eine großartige Voraussetzung für das sehr erfolgreiche Wachstum unserer Pflanzen. Ich würde Licht vor CO2 als wichtig einstufen. Eine qualitativ hochwertige Beleuchtung ist entscheidend für das erfolgreiche Pflanzenwachstum.


V prípade, že vidíme produkciu kyslíka rastlinami – tvoriace sa bublinky čerstvého kyslíka, koncentrácia kyslíka v bunke stúpla nad 40 mg/l. Pre úspešnejší rast rastlín je veľa krát vhodné siahnuť po doplnení výživy. Ku zvýšenému prijímaniu živín – energie prispieva aj prúdenie vody. Výživu rastliny dostávajú aj vo forme odpadných látok – výkalov rýb. Aj nádrže tzv. holandského typu (rastlinné) často krát obsahujú nejaké ryby, ktoré slúžia práve na neustále obohacovanie živinami. V tomto prípade skôr tými stopovými. V prípade, že sa vo vode nachádza nedostatok CO2 a rastliny dokážu z hydrogenuhličitanov tento získať, môže dôjsť ku biogénnemu odvápneniu – vyzrážanie nerozpustného uhličitanu vápenatého na povrchu listov. Prijímanie hydrogenuhličitanov je však energeticky náročnejšie. Akvárium má často dostatok živín vo forme exkrementov rýb. Humínové kyseliny sú látky, ktoré sa najmä v prírode bežne nachádzajú vo vode. Sú to produkty látkovej premeny dreva, pôdy, listov, častí rastlín. Z hľadiska využitia pre akvaristiku je zaujímavé použitie dreva a listov, prípadne šišiek, škrupín orechov apod. Sú nesmierne dôležité pre rastliny, pretože dokážu byť energetickým mostom medzi zdrojom výživy a rastlinou. Vďaka týmto organickým komplexom dokáže rastlina získať to, čo je príroda ponúka. Je to podobná funkcia ako majú pre vitamín C. Darmo budeme prijímať megadávky vitamínov ak ich telo nedokáže zužitkovať. Humínové kyseliny sa tvoria v prírode v pôde. Železo vo vode za normálnych podmienok veľmi rýchlo oxiduje na formu nevyužiteľnú pre rastliny.


If we observe oxygen production by plants – the formation of bubbles of fresh oxygen, the concentration of oxygen in the cell has risen above 40 mg/l. For more successful plant growth, it is often advisable to supplement nutrients. Increased nutrient uptake – energy is also contributed by water flow. Plants also receive nutrients in the form of waste materials – fish excrement. Even tanks of the so-called Dutch type (planted) often contain some fish, which serve to constantly enrich the nutrients. In this case, more with trace elements. If there is a lack of CO2 in the water and plants are able to obtain it from bicarbonates, biogenic decalcification can occur – the precipitation of insoluble calcium carbonate on the surface of leaves. However, the uptake of bicarbonates is more energy-intensive. Aquariums often have enough nutrients in the form of fish excrement. Humic acids are substances that are commonly found in water in nature. They are products of the transformation of wood, soil, leaves, plant parts. From the point of view of use for aquaristics, the use of wood and leaves, or cones, nut shells, etc., is interesting. They are extremely important for plants because they can be an energy bridge between a source of nutrition and a plant. Thanks to these organic complexes, the plant can obtain what nature offers. It’s a similar function to what bioflavonoids have for vitamin C. It’s useless to take megadoses of vitamins if the body can’t utilize them. Humic acids are formed naturally in the soil. Iron in water under normal conditions oxidizes very quickly into a form unusable for plants.


Wenn wir die Sauerstoffproduktion durch Pflanzen beobachten – die Bildung von Blasen frischen Sauerstoffs -, ist die Konzentration von Sauerstoff in der Zelle auf über 40 mg/l gestiegen. Für ein erfolgreicheres Pflanzenwachstum ist es oft ratsam, Nährstoffe zu ergänzen. Eine erhöhte Nährstoffaufnahme – Energie wird auch durch den Wasserfluss beigetragen. Pflanzen erhalten auch Nährstoffe in Form von Abfallmaterialien – Fischausscheidungen. Selbst Becken des sogenannten holländischen Typs (bepflanzt) enthalten oft einige Fische, die dazu dienen, die Nährstoffe ständig anzureichern. In diesem Fall eher mit Spurenelementen. Wenn es im Wasser an CO2 mangelt und Pflanzen es aus Hydrogencarbonaten gewinnen können, kann es zu biogenem Entkalken kommen – der Ausfällung von unlöslichem Calciumcarbonat auf der Oberfläche der Blätter. Die Aufnahme von Hydrogencarbonaten ist jedoch energieaufwendiger. Aquarien haben oft genug Nährstoffe in Form von Fischausscheidungen. Huminsäuren sind Substanzen, die in der Natur im Wasser häufig vorkommen. Sie sind Produkte der Umwandlung von Holz, Boden, Blättern, Pflanzenteilen. Vom Standpunkt der Verwendung für die Aquaristik ist die Verwendung von Holz und Blättern oder Kegeln, Nussschalen usw. interessant. Sie sind äußerst wichtig für Pflanzen, weil sie eine Energiebrücke zwischen einer Nahrungsquelle und einer Pflanze sein können. Dank dieser organischen Komplexe kann die Pflanze das bekommen, was die Natur bietet. Es ist eine ähnliche Funktion wie die von Bioflavonoiden für Vitamin C. Es ist sinnlos, Megadosen von Vitaminen einzunehmen, wenn der Körper sie nicht nutzen kann. Huminsäuren entstehen natürlich im Boden. Eisen im Wasser oxidiert unter normalen Bedingungen sehr schnell in eine Form, die für Pflanzen unbrauchbar ist.


Filter je doslova požierač železa. Ak sa však viaže v chelátoch, v organických komplexoch, je prístupné rastlinám. Ide o Fe2+, aj Fe3+, a práve humínové kyseliny sú substrátom, v ktorom sa môže železo uplatniť pre rastliny. Nedostatok železa spôsobuje chlorózu, ktorá sa prejavuje slabým pletivom – sklovitými listami, žltnutím najmä od okrajov podobne ako aj u suchozemských rastlín. a stopové látky sú získavané prirodzenou cestou z vody a z detritu. Stopové látky sú látky, prvky, ktoré nie sú nevyhnutné vo veľkom množstve, ale iba v nízkych (stopových) koncentráciách – napr. Zn, Mn, K, Cu. Niektoré z týchto prvkov sú vo vyšších koncentráciách škodlivé až jedovaté. Detrit je hmota, tvorená mikroorganizmami organickou hmotou odumretých rastlín, výkalov rýb apod. V prípade rastlinného akvária je často kameňom úrazu práve minerálnych látok. Najlepší spôsob ako toho dosiahnuť sú ryby. Mikroorganizmy – najmä nitrifikačné a denitrifikačné baktérie rozkladajú hmotu na látky využiteľné rastlinami. Rastliny tento zdroj energie využívajú najmä pomocou koreňov. Niektoré sú schopné viazať viac NO3 – dusičnanov napr. Ceratophyllum demersum, Riccia fluitans. Veľa z nás má zdrojovú vodu obsahujúcu vysoké množstvo dusičnanov. Norma pitnej vody o maximálnej hodnote je dosť pre akvaristiku, nevhodné najmä pre nové akvárium. Vďaka pomerne vysokému obsahu dusíka potom môže ľahšie dôjsť ku tvorbe toxického amoniaku.


The filter is literally an iron eater. However, when it binds in chelates, in organic complexes, it becomes accessible to plants. This includes Fe2+ and Fe3+, and it is precisely humic acids that serve as a substrate where iron can be utilized by plants. Iron deficiency causes chlorosis, characterized by weak tissues – glassy leaves, yellowing especially from the edges, similar to terrestrial plants. Minerals and trace elements are obtained naturally from water and detritus. Trace elements are substances, elements that are not essential in large quantities, but only in low (trace) concentrations – e.g., Zn, Mn, K, Cu. Some of these elements can be harmful or even toxic in higher concentrations. Detritus is matter composed of organic matter from dead plants, fish excrement, etc. In the case of a planted aquarium, the mineral content is often the stumbling block. The best way to achieve this is through fish. Microorganisms – especially nitrifying and denitrifying bacteria – break down matter into substances that plants can use. Plants primarily utilize this energy source through their roots. Some are capable of binding more NO3 – nitrates, for example, Ceratophyllum demersum, Riccia fluitans. Many of us have source water containing high levels of nitrates. The maximum value in drinking water standards is quite high for aquariums, especially unsuitable for new ones. Due to the relatively high nitrogen content, it can lead more easily to the formation of toxic .


Der Filter ist buchstäblich ein Eisenfresser. Wenn es jedoch in Chelaten, in organischen Komplexen gebunden ist, wird es für Pflanzen zugänglich. Dies umfasst Fe2+ und Fe3+, und genau Huminsäuren dienen als Substrat, auf dem Eisen von Pflanzen genutzt werden kann. Eisenmangel führt zu Chlorose, gekennzeichnet durch schwache Gewebe – glasige Blätter, Vergilbung besonders an den Rändern, ähnlich wie bei terrestrischen Pflanzen. Mineralien und Spurenelemente werden auf natürliche Weise aus Wasser und Detritus gewonnen. Spurenelemente sind Substanzen, Elemente, die nicht in großen Mengen, sondern nur in niedrigen (Spuren-)Konzentrationen notwendig sind – z. B. Zn, Mn, K, Cu. Einige dieser Elemente können in höheren Konzentrationen schädlich oder sogar giftig sein. Detritus besteht aus organischem Material aus abgestorbenen Pflanzen, Fischausscheidungen usw. Im Falle eines bepflanzten Aquariums ist der Mineralgehalt oft der Stolperstein. Der beste Weg, dies zu erreichen, sind Fische. Mikroorganismen – insbesondere nitrifizierende und denitrifizierende Bakterien – zersetzen Materie in Substanzen, die Pflanzen nutzen können. Pflanzen nutzen diese Energiequelle hauptsächlich über ihre Wurzeln. Einige sind in der Lage, mehr NO3 – Nitrate zu binden, zum Beispiel Ceratophyllum demersum, Riccia fluitans. Viele von uns haben Quellwasser mit hohen Nitratgehalten. Der Höchstwert in den Trinkwasserstandards ist für Aquarien recht hoch, besonders ungeeignet für neue. Aufgrund des relativ hohen Stickstoffgehalts kann es leichter zur Bildung von giftigem Ammoniak führen.


Cyklus dusíka trvá niečo vyše mesiaca, takže dusičnanový anión pridaný dnes putuje ekosystémom akvária viac ako , kým ho opustí. Denitrifikačné a nitrifikačné procesy sú pomerne zložité, zaujímavé aj pre laika je snáď fakt, že sa ako produkt týchto reakcií tvorí aj N2. Ten samozrejme uniká do atmosféry – von z nádrže. Denitrifikačné baktérie sa nachádzajú vo filtri. Tak ako píšem v článku o filtrovaní, je nevhodné filtračné vložky podrobovať tečúcej vode z bežného vodovodu. Preto, aby sme nezabili naše rozvinuté baktérie je vhodnejšie umývať molitan vo vode neobsahujúcej chlór a ostatné plyny používané vo vodovodnej sieti. Na trhu existujúce produkty, ktoré obsahujú baktérie, ktoré sa pridávajú do filtra. Na trhu sú dostupné rôzne produkty hnojív a výživových doplnkov pre rastliny. Neodporúča sa kombinovať hnojivá ani rôznych firiem ani výrobkov jednej firmy. Mechanicky zachytené časti z filtra používam ako hnojivo aj do kvetináčov suchozemských rastlín. Filter ako oxidant obyčajne obsahuje množstvo látok, hodnotné je najmä železo, ktoré je balzamom pre často chudobné pôdy v črepníkoch. Táto hmota, je okrem toho takpovediac natrávená, takže sa v pôde pomerne rýchlo rozkladá.


The nitrogen cycle takes a little over a month, so the nitrate anion added today travels through the aquarium ecosystem for more than a month before it leaves. Denitrification and nitrification processes are quite complex. An interesting fact even for a layperson is that gaseous nitrogen N2 is also produced as a product of these reactions. This nitrogen naturally escapes into the atmosphere – out of the tank. Denitrifying bacteria are found in the filter. As I wrote in the article about filtration, it is not suitable to subject filter media to flowing water from the regular water supply. Therefore, to avoid killing our established bacteria, it is better to wash the foam in water without chlorine and other gases used in the water supply system. There are products available on the market containing bacteria that are added to the filter. Various fertilizer products and nutritional supplements for plants are available on the market. It is not recommended to combine fertilizers from different companies or products from one company. I use mechanically trapped particles from the filter as fertilizer for potted terrestrial plants. The filter, as an oxidant, usually contains a lot of substances, with iron being particularly valuable, which acts as a balm for often nutrient-poor soils in pots. This material is, moreover, so to speak, digested, so it decomposes relatively quickly in the soil.


Der Stickstoffkreislauf dauert etwas mehr als einen Monat, sodass das heute zugegebene Nitrat-Anion mehr als einen Monat lang durch das Aquarium-Ökosystem wandert, bevor es es verlässt. Die Prozesse der Denitrifikation und Nitrifikation sind ziemlich komplex. Eine interessante Tatsache auch für Laien ist, dass als Produkt dieser Reaktionen auch gasförmiger Stickstoff N2 entsteht. Dieser Stickstoff entweicht natürlich in die Atmosphäre – aus dem Becken heraus. Denitrifizierende Bakterien befinden sich im Filter. Wie ich in dem Artikel über die Filtration schrieb, ist es nicht ratsam, Filtermedien dem fließenden Wasser aus der normalen Wasserversorgung auszusetzen. Daher ist es besser, um unsere etablierten Bakterien nicht zu töten, den Schwamm in Wasser ohne Chlor und andere Gase, die im Wasserversorgungssystem verwendet werden, zu waschen. Es gibt Produkte auf dem Markt, die Bakterien enthalten, die dem Filter zugesetzt werden. Auf dem Markt sind verschiedene Düngerprodukte und Nahrungsergänzungsmittel für Pflanzen erhältlich. Es wird nicht empfohlen, Dünger verschiedener Unternehmen oder Produkte eines Unternehmens zu kombinieren. Ich verwende mechanisch eingefangene Partikel aus dem Filter als Dünger für Topfpflanzen. Der Filter enthält als Oxidationsmittel in der Regel viele Substanzen, wobei Eisen besonders wertvoll ist, das als Balsam für oft nährstoffarme Böden in Töpfen wirkt. Dieses Material wird außerdem sozusagen verdaut, sodass es sich im Boden relativ schnell zersetzt.


Rašelina znižuje pH aj tvrdosť vody, vode poskytuje humínové kyseliny a iné organické látky. je svetovo veľmi rozšírené takpovediac nekomerčné hnojivo. Mieša sa zo síranu draselného, heptahydrátu síranu horečnatého, dusičnanu draselného a stopových látok: B, Ca, Cu, , Mn, Mo, Zn, ktoré sú vo forme organického komplexu. Je to vhodná kombinácia, v ktorej sú stopové látky asi najdôležitejšie. CO2 ne pridávam pomocou známeho procesu kvasenia. Stačí však na to fľaša, do ktorej nalejeme takmer po vrch vodu, pridáme droždie () a cukor. Vodu na začiatok odporúčam teplejšiu (okolo 35 °C). Fľašu uzatvorím vrchnákom, v ktorom mám otvor pre hadičku, ktorá na druhom konci končí v akváriu, kde je zakončená vzduchovacím kameňom, alebo lipovým drievkom. Použiť sa dá úspešne aj cigaretový filter. Prípadne hadička končí v akváriovom filtri, cez ktorý sa rozstrekuje do vody. Takýto dávkovač CO2 dokáže produkovať 3 – 5 týždňov oxid uhličitý. Má to však chybu v tom, že nie je ošetrený proti náhlemu vzostupu produkcie CO2. V noci je lepšie CO2 takto do nádrže nepumpovať. Na produkciu CO2 sa hodia aj bombičky z na výrobu sódy. Na trhu existujú rôzne . Ja používam CO2 fľašu, na ktorej je redukčný ventil a „ihlový“ (bicyklový) ventil, z ktorého ide hadička do kanistra v akváriu. Funguje to tak, voda si „vypýta“ toľko CO2, koľko „potrebuje“. Tak dosiahnem maximálne rozumné nasýtenie akvária oxidom uhličitým. Redukčný ventil je nato, aby znížil tlak na 5 atmosfér. Ihlový ventil vo všeobecnosti je na to, aby tlak znížil na mieru vhodnú do obyčajnej tenkej akvaristickej hadičky. Existujú aj normálne ihlové ventily, ja však používam ventil, ktorý používajú na hustenie pneumatík. Nestojí ani 10 €. existujú rôzne, sú aj také, ktoré na výstupe ponúkajú tlak CO2, ktorý môže ísť rovno do nádrže. Kombinovať sa dá pomocou elektromagnetických ventilov, ktoré by sa otvoril podľa spínača. Ja si to riadim tak, že CO2 napustím vždy ráno. Neodporúčam sýtiť akvárium sústavne, tlačiť do vody oxid uhličitý cez otvorené ventily napr. cez rozstrekovanie pomocou filtra. V každom prípade, či už pri zakúpení komerčného produktu, alebo vlastného riešenia, treba mať na zreteli, že vo vode je rádovo 4 krát nižšia ako vo vzduchu. Čiže podobne ako kyslík, aj CO2 je prijaté vo vyššom množstve za predpokladu tvorby menších bubliniek. Henryho zákon hovorí, že je priamo úmerná parciálnemu tlaku plynu nad jej hladinou – je to v podstate analógia ku osmotickým javom.


Peat reduces the pH and water hardness, providing humic acids and other organic substances to the water. PMDD is a widely used non-commercial fertilizer. It is mixed from potassium sulfate, magnesium sulfate heptahydrate, potassium nitrate, and trace elements: B, Ca, Cu, Fe, Mn, Mo, Zn, which are in the form of organic complexes. It is a suitable combination in which trace elements are probably the most important. I don’t add CO2 using the well-known fermentation process. However, a bottle is enough for this purpose, into which we pour water almost to the top, add yeast and sugar. I recommend starting with warmer water (around 35 °C). I seal the bottle with a stopper, in which I have a hole for a tube, which ends in the aquarium with an air stone or a lime wood piece. A cigarette filter can also be successfully used. Alternatively, the tube ends in the aquarium filter, through which it sprays into the water. Such a CO2 dispenser can produce carbon dioxide for 3 – 5 weeks. However, it has a flaw in that it is not protected against a sudden increase in CO2 production. It’s better not to pump CO2 into the tank at night. CO2 cylinders for making soda can also be used for CO2 production. There are various CO2 diffusers available on the market. I use a CO2 cylinder with a pressure regulator and a „needle“ (bicycle) valve, from which a tube goes into the canister in the aquarium. It works so that the water „requests“ as much CO2 as it „needs“. This way, I achieve a maximally reasonable saturation of the aquarium with carbon dioxide. The pressure regulator is there to reduce the pressure to 5 atmospheres. The needle valve, in general, reduces the pressure to a suitable level for a regular thin aquarium hose. There are also normal needle valves, but I use a valve that cyclists use to inflate tires. It costs less than 10 €. There are various pressure regulators available; some offer CO2 pressure at the output, which can go straight into the tank. It can be combined using solenoid valves, which would open according to a switch. I manage it so that I always inject CO2 in the morning. I do not recommend constantly saturating the aquarium, pushing carbon dioxide into the water through open valves, for example, through spraying using a filter. In any case, whether purchasing a commercial product or a DIY solution, it should be borne in mind that gas diffusion in water is about 4 times lower than in air. So, similarly to oxygen, CO2 is absorbed in larger quantities assuming the formation of smaller bubbles. Henry’s law states that the concentration of dissolved gas is directly proportional to the partial pressure of the gas above its surface – it is essentially analogous to osmotic phenomena.


Torf senkt den pH-Wert und die Wasserhärte und liefert dem Wasser Huminsäuren und andere organische Substanzen. PMDD ist ein weit verbreiteter nicht kommerzieller Dünger. Er wird aus Kaliumsulfat, Magnesiumsulfat-Heptahydrat, Kaliumnitrat und Spurenelementen wie B, Ca, Cu, Fe, Mn, Mo, Zn gemischt, die in Form organischer Komplexe vorliegen. Es handelt sich um eine geeignete Kombination, bei der Spurenelemente wahrscheinlich am wichtigsten sind. Ich füge kein CO2 nach dem bekannten Gärungsprozess hinzu. Es reicht jedoch eine Flasche, in die wir fast bis zum Rand Wasser gießen, Hefe und Zucker hinzufügen. Ich empfehle, zu Beginn warmes Wasser zu verwenden (etwa 35 °C). Ich verschließe die Flasche mit einem Stopfen, in den ich ein Loch für einen Schlauch habe, der im Aquarium mit einem Luftsprudler oder einem Kalkholzstück endet. Auch ein Zigarettenfilter kann erfolgreich verwendet werden. Alternativ endet der Schlauch im Aquariumfilter, durch den er in das Wasser sprüht. Ein solcher CO2-Spender kann Kohlendioxid für 3 – 5 Wochen produzieren. Es hat jedoch den Fehler, dass es nicht gegen einen plötzlichen Anstieg der CO2-Produktion geschützt ist. Es ist besser, nachts kein CO2 in den Tank zu pumpen. CO2-Zylinder zur Herstellung von Soda können ebenfalls zur CO2-Produktion verwendet werden. Auf dem Markt gibt es verschiedene CO2-Diffusoren. Ich verwende einen CO2-Zylinder mit Druckregler und einem „Nadel“ (Fahrrad)-Ventil, von dem aus ein Schlauch in den Behälter im Aquarium führt. Es funktioniert so, dass das Wasser so viel CO2 „anfragt“, wie es „benötigt“. Auf diese Weise erreiche ich eine maximal vernünftige Sättigung des Aquariums mit Kohlendioxid. Der Druckregler ist dafür da, den Druck auf 5 Atmosphären zu reduzieren. Das Nadelventil reduziert den Druck im Allgemeinen auf ein für einen normalen dünnen Aquarienschlauch geeignetes Niveau. Es gibt auch normale Nadelventile, aber ich verwende ein Ventil, das von Radfahrern zum Aufpumpen von Reifen verwendet wird. Es kostet weniger als 10 €. Es gibt verschiedene Druckregler erhältlich; einige bieten CO2-Druck am Ausgang an, der direkt in den Tank geleitet werden kann. Es kann mit Hilfe von Magnetspulenventilen kombiniert werden, die sich entsprechend einem Schalter öffnen würden. Ich steuere es so, dass ich immer morgens CO2 einspritze. Ich empfehle nicht, das Aquarium ständig zu sättigen, indem man Kohlendioxid durch offene Ventile in das Wasser pumpt, beispielsweise durch Sprühen mit einem Filter. Auf jeden Fall, ob Sie ein kommerzielles Produkt kaufen oder eine DIY-Lösung verwenden, sollte beachtet werden, dass die Gasdiffusion im Wasser etwa 4-mal geringer ist als in der Luft. Also wird, ähnlich wie bei Sauerstoff, CO2 in größeren Mengen aufgenommen, vorausgesetzt, es entstehen kleinere Blasen. Das Henrysche Gesetz besagt, dass die Konzentration des gelösten Gases direkt proportional zum Partialdruck des Gases über seiner Oberfläche ist – es ist im Wesentlichen analog zu osmotischen Phänomenen.

Akvaristika, Údržba akvaristu

Úprava vody

Hits: 36568

Pri úprave vody je nutné byť obozretný. Vhodné sú z chémie. Je nutné si uvedomiť, že bez voči živým organizmom nie je etické pristupovať ku experimentom pri zmenách parametrov vody. Užitočné je oboznámiť sa s parametrami vody. Kvalitatívne všetky zmeny sa dajú vykonať miešaním s vodou iných vlastností. Meraniu parametrov vody, úprave tvrdosti, sa často vkladá príliš veľký význam. chované už v zajatí sú často prispôsobené našim podmienkam. Nie je prvoradé, aby ryby a rastliny žili vo vode s takým pH a hodnotou tvrdosti v akej žijú v prírode, ale aby sme splnili čo najviac podmienok pre ich úspešný . Neutápajte sa v neustálom meraní a pokusoch o zmenu. Pre bežnú akvaristickú prax sa parametre vody preceňujú.


When treating water, caution is necessary. Knowledge of chemistry is useful. is necessary to realize that without responsibility towards living organisms, it is not ethical to approach experiments with changes in water parameters. It is useful to familiarize oneself with the parameters of water. Qualitatively, all changes can be made by mixing with water of different properties. Monitoring water parameters, adjusting hardness, and pH are often overemphasized. Fish bred for generations in captivity are often adapted to our conditions. It is not paramount for fish and plants to live in water with the same pH and hardness as they do in nature, but to meet as many conditions as possible for their successful development. Do not get lost in constant measurements and attempts to change. For regular aquarium practice, water parameters are overrated.


Bei der Aufbereitung von Wasser ist Vorsicht geboten. Kenntnisse in Chemie sind nützlich. Es ist notwendig zu erkennen, dass es nicht ethisch ist, ohne Verantwortung gegenüber lebenden Organismen Experimente mit Veränderungen der Wasserparameter durchzuführen. Es ist nützlich, sich mit den Parametern des Wassers vertraut zu machen. Qualitativ können alle Veränderungen durch Mischen mit Wasser anderer Eigenschaften vorgenommen werden. Die Überwachung der Wasserparameter, die Anpassung der Härte und des pH-Werts werden oft überbetont. Fische, die seit Generationen in Gefangenschaft gezüchtet wurden, sind oft an unsere Bedingungen angepasst. Es ist nicht entscheidend, dass Fische und Pflanzen in Wasser mit dem gleichen pH-Wert und der gleichen Härte leben wie in der Natur, sondern dass möglichst viele Bedingungen für ihre erfolgreiche Entwicklung erfüllt werden. Verlieren Sie sich nicht in ständigen Messungen und Versuchen, etwas zu ändern. Für die regelmäßige Aquariumpraxis werden die Wasserparameter überbewertet.


Zvyšovanie teploty vody ohrievačom je pomerne bežné aj v iných oblastiach, nielen v akvaristike. Ďaleko ťažší problém je však ako vodu ochladzovať. Túto otázku riešia najmä akvaristi zaoberajúci sa chovom morských živočíchov. Tu sa ponúka možnosť využiť . Pomôže staršia mraznička, chladiarenský prístroj a šikovný majster. Druhá možnosť je nákup v obchode. Ochladzovanie vody týmto spôsobom je finančne pomerne náročné. V malom merítku je možné využiť ľad, je to však nebezpečné – pretože rozpúšťanie ľadu je potrebné veľa , Ľad je pevná látka a oplýva tepelnou kapacitou – na prechod do kvapalného stavu je nutné viac energie pri rovnakom posune teplôt. Postupujme preto opatrne, aby sme nemuseli vyskúšať teplotné extrémy.


Raising the water temperature with a heater is quite common in various areas, not just in aquariums. However, a far more challenging problem is how to cool the water. This question is primarily addressed by aquarists dealing with the breeding of marine organisms. Here, the option to utilize the principle of Peltier cells presents itself. An old freezer, refrigeration device, and a skilled craftsman can help. The second option is purchasing from a store. Cooling water in this way is financially demanding. On a small scale, ice can be used, but it is dangerous – because melting ice requires a lot of energy. Ice is a solid substance and has a high thermal capacity – it requires more energy to transition to a liquid state for the same temperature change. Let’s proceed cautiously so we don’t have to experience temperature extremes.


Das Erhöhen der Wassertemperatur mit einem Heizgerät ist in verschiedenen Bereichen recht verbreitet, nicht nur in Aquarien. Ein weit schwierigeres Problem ist jedoch, wie man das Wasser kühlt. Diese Frage wird hauptsächlich von Aquarianern behandelt, die sich mit der Zucht von Meerestieren beschäftigen. Hier bietet sich die Möglichkeit, das Prinzip der Peltier-Zellen zu nutzen. Ein alter Gefrierschrank, ein Kühlsystem und ein geschickter Handwerker können helfen. Die zweite Option ist der Kauf im Geschäft. Das Kühlen des Wassers auf diese Weise ist finanziell anspruchsvoll. Im kleinen Maßstab kann Eis verwendet werden, aber es ist gefährlich – denn das Schmelzen von Eis erfordert viel Energie. Eis ist ein fester Stoff und hat eine hohe Wärmekapazität – es erfordert mehr Energie, um den Übergang in einen flüssigen Zustand für die gleiche Temperaturänderung zu bewirken. Gehen wir also vorsichtig vor, damit wir nicht Temperaturen erleben müssen.


Ak chceme meniť tvrdosť vody, bežnými lacnými prostriedkami vieme zabezpečiť len jej zvýšenie. vápnika a horčíka zvýšime uhličitanom vápenatým – CaCO3, uhličitanom horečnatým – MgCO3, síranom vápenatým – CaSO4, síranom horečnatým – MgSO4, chloridom vápenatým – CaCl2. Prirodzene napr. vápencom. Avšak ak chceme dosiahnuť rýchlu zmenu musíme použiť silnejšiu koncentráciu. Napokon je dostať aj účinné komerčné preparáty, ktoré dokážu rýchlo tvrdosť zvýšiť. Pred oveľa ťažšou otázkou stojíme ak sme si zaumienili tvrdosť znížiť. Je možné použiť vyzrážanie kyselinou šťaveľovou, no rovnováha tohto procesu je malá. Ak by sme však dokázali túto vodu mechanicky veľmi jemným filtrom odfiltrovať, možno by sme dosiahli žiadaný výsledok. vody za účelom zníženia tvrdosti je veľmi neekonomické. Efekt je mizivý. Varom vyzrážame len uhličitanovú tvrdosť a to maximálne o 2.7 °. Okrem toho varom ničíme aj ten kúsok života, ktorý vo vode je, preto neodporúčam. čiastočne znižuje , podobne niektoré druhy rastlín napr. a živočíchov, najmä ulitníkov a lastúrnikov znižujú obsah Ca a Mg vo vode. Do svojich ulít sú schopné kumulovať veľké množstvo vápnika, veď sú prakticky na jeho výskyte závislé. Ampullarie dokážu vo väčšom množstvo viazať do svojich ulít pomerne značné množstvo vápnika. Naopak pri jeho nedostatku chradnú, mäkne im schránka. Rašelina znižuje takisto v malej miere tvrdosť vody. Miešanie vody mäkšej je samozrejme možné na dosiahnutie nižšej tvrdosti, funguje to lineárne. Pre reálnu prax máme v princípe nasledujúce možnosti.


If we want to change the water hardness, with common inexpensive means, we can only increase it. We can increase the content of calcium and magnesium with calcium carbonate – CaCO3, magnesium carbonate – MgCO3, calcium sulfate – CaSO4, magnesium sulfate – MgSO4, calcium chloride – CaCl2. Naturally, for example, with limestone. However, if we want to achieve a quick change, we must use a stronger concentration. Finally, effective commercial products are available that can quickly increase hardness. However, a much more difficult question arises if we intend to decrease the hardness. It is possible to use precipitation with oxalic acid, but the equilibrium of this process is small. However, if we were able to filter this water mechanically with a very fine filter, we might achieve the desired result. Boiling water to reduce hardness is very uneconomical. The effect is minimal. Boiling only precipitates carbonate hardness, up to a maximum of 2.7 °dKH. In addition, boiling also destroys the little life that is in the water, so I do not recommend boiling. Activated charcoal partially reduces water hardness, similarly some types of plants such as Anacharis densa and animals, especially snails and crustaceans, reduce the content of Ca and Mg in the water. They are able to accumulate large amounts of calcium in their shells, as they are practically dependent on its occurrence. Ampullaria are able to bind a relatively large amount of calcium into their shells in larger quantities. Conversely, in its absence, their shells soften. Peat also reduces water hardness to a small extent. Mixing softer water is of course possible to achieve lower hardness, and it works linearly. For practical purposes, we have the following options in principle.


Wenn wir die Wasserhärte ändern wollen, können wir mit gängigen kostengünstigen Mitteln nur deren Erhöhung erreichen. Wir können den Gehalt an Calcium und Magnesium mit Calciumcarbonat – CaCO3, Magnesiumcarbonat – MgCO3, Calciumsulfat – CaSO4, Magnesiumsulfat – MgSO4, Calciumchlorid – CaCl2 erhöhen. Natürlich, zum Beispiel mit Kalkstein. Wenn wir jedoch eine schnelle Änderung erreichen wollen, müssen wir eine stärkere Konzentration verwenden. Schließlich stehen auch wirksame kommerzielle Produkte zur Verfügung, die die Härte schnell erhöhen können. Eine viel schwierigere Frage stellt sich jedoch, wenn wir die Härte verringern möchten. Es ist möglich, eine Fällung mit Oxalsäure zu verwenden, aber das Gleichgewicht dieses Prozesses ist gering. Wenn wir jedoch dieses Wasser mechanisch mit einem sehr feinen Filter filtern könnten, könnten wir das gewünschte Ergebnis erzielen. Das Abkochen von Wasser zur Verringerung der Härte ist sehr uneffektiv. Der Effekt ist minimal. Beim Kochen fällt nur die Carbonathärte aus, maximal bis zu 2,7 °dKH. Darüber hinaus zerstört das Kochen auch das wenige Leben im Wasser, daher empfehle ich es nicht. Aktivkohle reduziert die Wasserhärte teilweise, ebenso einige Arten von Pflanzen wie Anacharis densa und Tiere, insbesondere Schnecken und Krebstiere, reduzieren den Gehalt an Ca und Mg im Wasser. Sie sind in der Lage, große Mengen Calcium in ihren Schalen anzusammeln, da sie praktisch von dessen Auftreten abhängig sind. Ampullaria sind in der Lage, in größeren Mengen eine relativ große Menge Calcium in ihre Schalen zu binden. Umgekehrt erweichen sich ihre Schalen bei dessen Fehlen. Torf verringert ebenfalls die Wasserhärte in geringem Maße. Das Mischen von weicherem Wasser ist natürlich möglich, um eine geringere Härte zu erreichen, und es funktioniert linear. Für praktische Zwecke haben wir im Prinzip folgende Möglichkeiten.


Destilácia – v destilačnej kolóne sa zbavuje iónov. Pri destilácii dochádza ku produkcii značného množstva odpadovej vody. Používanie veľkých objemov vody je nutné, pretože pri destilácii dochádza ku veľkých teplotám, ktoré je nutné ochladzovať. Destilačná kolóna je pomerne značná investícia, používajú ju chovatelia, ktorí majú väčšie množstvo nádrží. je veľmi . Je nutné však povedať, že nie je veľmi vhodná pre akvaristické účely. Je to voda totiž sterilná, a aj veľmi labilná. Preto je dobré túto vodu miešať. Pre tento dôvod je ideálna reverzná osmóza. Technická destilovaná voda z obchodu nie je veľmi vhodná pre akvaristov. Prevádzka samotnej destilačnej kolóny nepodlieha nijakým veľkých opotrebeniam, každopádne pri normálnom používaní nevyžaduje vysoké následné investície.


Distillation – In the distillation column, water is stripped of ions. Distillation generates a significant amount of wastewater. The use of large volumes of water is necessary because distillation involves high temperatures that need to be cooled. The distillation column is a considerable investment, used by breeders who have a larger number of tanks. The efficiency of distillation is very high. However, it must be said that distilled water is not very suitable for aquarium purposes. It is sterile water and very labile. Therefore, it is good to mix this water. Reverse osmosis is ideal for this reason. Technical distilled water from the store is not very suitable for aquarists. The operation of the distillation column itself does not undergo any significant wear and tear, and in any case, under normal use, it does not require high subsequent investments.


Destillation – In der Destillationssäule wird Wasser von Ionen befreit. Die Destillation erzeugt eine beträchtliche Menge an Abwasser. Die Verwendung großer Wassermengen ist erforderlich, da bei der Destillation hohe Temperaturen auftreten, die gekühlt werden müssen. Die Destillationssäule ist eine erhebliche Investition, die von Züchtern verwendet wird, die eine größere Anzahl von Tanks haben. Die Effizienz der Destillation ist sehr hoch. Es muss jedoch gesagt werden, dass destilliertes Wasser für Aquarienzwecke nicht sehr geeignet ist. Es handelt sich um steriles Wasser und ist sehr labil. Daher ist es gut, dieses Wasser zu mischen. Die Umkehrosmose ist aus diesem Grund ideal. Technisches destilliertes Wasser aus dem Laden ist für Aquarianer nicht sehr geeignet. Der Betrieb der Destillationssäule selbst unterliegt keinem signifikanten Verschleiß und erfordert unter normalen Bedingungen keine hohen anschließenden Investitionen.


Reverzná osmóza – proces, pri ktorom sa využíva – polopriepustnosť. Osmóza je známy proces, pri ktorom nastáva výmena látok pôsobením osmotického tlaku za predpokladu polopriepustnosti medzi dvoma sústavami. Pre vysvetlenie – nemôže dôjsť ku jednoduchej difúzii, ku zmiešaniu, pretože medzi dvoma systémami existuje hranica, prekážka. Ale vplyvom toho, že táto hranica je polopriepustná, vďaka osmotického tlaku dojde ku toku látok. Toto využíva aj reverzná osmóza, no s tým rozdielom, že pri reverznej osmóze dochádza ku odčerpaniu iónov celkom, nedochádza ku vyrovnaniu osmotického tlaku na jednej aj druhej strane. Takto získaná je vhodná pre akvaristu. Napokon ani jej účinnosť nie je taká vysoká ako pri destilácii. Voda z reverzky zvyčajne dosahuje zvyčajne 1 – 10 % pôvodnej hodnoty vodivosti. Na trhu existujú komerčne dostupné , ktoré je možné si zakúpiť. Objemovo nezaberajú tak veľa miesta ako destilačné sústavy. Oproti destilačnej sústave majú jednu veľkú nevýhodu v trvanlivosti – a filtračné média osmotickej kolóny je nutné časom meniť, pretože inak reverzka prestane plniť svoju funkciu.


Reverse osmosis – a process that utilizes semipermeability. Osmosis is a known process in which the exchange of substances occurs due to osmotic pressure assuming semipermeability between two systems. For clarification – simple diffusion, mixing cannot occur because there is a boundary, an obstacle between two systems. But due to the fact that this boundary is semipermeable, thanks to osmotic pressure, the flow of substances occurs. Reverse osmosis also utilizes this, but with the difference that in reverse osmosis, ions are completely removed, there is no equalization of osmotic pressure on both sides. The water obtained in this way is suitable for aquarists. Finally, its efficiency is not as high as in distillation. Water from a reverse osmosis system typically reaches 1 – 10% of the original conductivity value. There are commercially available reverse osmosis units on the market that can be purchased. They do not take up as much space as distillation systems. However, compared to distillation systems, they have one major disadvantage in terms of durability – membranes and filtration media of the reverse osmosis unit need to be replaced over time because otherwise, the reverse osmosis system will fail to function properly.


Reversosmose – ein Prozess, der die Semipermeabilität nutzt. Osmose ist ein bekannter Prozess, bei dem der Austausch von Substanzen aufgrund des osmotischen Drucks unter der Annahme von Semipermeabilität zwischen zwei Systemen erfolgt. Zur Klarstellung – einfache Diffusion, Mischung kann nicht auftreten, weil es eine Grenze, ein Hindernis zwischen zwei Systemen gibt. Aber aufgrund der Tatsache, dass diese Grenze semipermeabel ist, kommt es dank des osmotischen Drucks zum Fluss von Substanzen. Die Umkehrosmose nutzt dies ebenfalls, jedoch mit dem Unterschied, dass bei der Umkehrosmose Ionen vollständig entfernt werden, es keine Ausgleichung des osmotischen Drucks auf beiden Seiten gibt. Das auf diese Weise gewonnene Wasser ist für Aquarianer geeignet. Schließlich ist seine Effizienz nicht so hoch wie bei der Destillation. Wasser aus einer Umkehrosmoseanlage erreicht in der Regel 1 – 10% des ursprünglichen Leitfähigkeitswerts. Auf dem Markt sind kommerziell erhältliche Umkehrosmoseanlagen erhältlich, die gekauft werden können. Sie nehmen nicht so viel Platz ein wie Destillationssysteme. Im Vergleich zu Destillationssystemen haben sie jedoch einen wesentlichen Nachteil in Bezug auf die Haltbarkeit – Membranen und Filtermedien der Umkehrosmoseanlage müssen im Laufe der Zeit ausgetauscht werden, da sonst die Umkehrosmoseanlage nicht ordnungsgemäß funktioniert.


Iontomeničom (Ionexom) – elektrolytická úprava cez katex a anex, z ktorých jeden je záporne nabitý a priťahuje katióny a druhý kladne a priťahuje anióny. Voda prechádza týmito dvoma hlavnými časťami a ióny sa na jednotlivých častiach viažu. Tým sa dosiahne demineralizácia od iónov. Ionex by sa dal aj najľahšie zostaviť aj amatérsky. Problémom je, že katex a anex má svoju kapacitu. Časom sa musí regenerovať, aby si zachoval svoje fyzikálne a celý systém bol účinný. Regenerácia sa vykonáva pôsobením rôznych špecifických látok, v niektorých prípadoch kuchynskou soľou. Ako ionex (menič) na vápnik sa používa napr. permutit, wofatit, cabunit. Selektívne ióntomeniče sú určené pre elimináciu niektorých prvkov – zložiek vody. Na dusík – N je vhodný monmorillonit a clinoptiolit.


Ion exchange (Ionex) – electrolytic treatment via a cathex and anex, one of which is negatively charged and attracts cations, and the other is positively charged and attracts anions. Water passes through these two main parts, and ions are bound to the individual parts. This achieves demineralization from ions. Ionex could also be easily assembled amateurishly. The problem is that cathex and anex have their capacity. Over time, it must be regenerated to maintain its physical properties and the entire system to be effective. Regeneration is carried out by the action of various specific substances, in some cases, kitchen salt. As an ion exchange (changer) for calcium, permutit, wofatit, and cabunit are used, for example. Selective ion exchangers are designed to eliminate certain elements – components in water. For nitrogen – N, monmorillonite, and clinoptiolite are suitable.


Iontausch (Ionex) – elektrolytische Behandlung über eine Kathex und Anex, von denen eine negativ geladen ist und Kationen anzieht, und die andere positiv geladen ist und Anionen anzieht. Wasser durchläuft diese beiden Hauptteile, und Ionen sind an die einzelnen Teile gebunden. Dadurch wird eine Entmineralisierung von Ionen erreicht. Ionex könnte auch leicht amateurhaft zusammengebaut werden. Das Problem ist, dass Kathex und Anex ihre Kapazität haben. Im Laufe der Zeit muss es regeneriert werden, um seine physikalischen Eigenschaften zu erhalten und das gesamte System effektiv zu machen. Die Regeneration erfolgt durch die Wirkung verschiedener spezifischer Substanzen, in einigen Fällen durch Speisesalz. Als Ionenaustauscher (Wechsler) für Calcium werden beispielsweise Permutit, Wofatit und Cabunit verwendet. Selektive Ionenaustauscher sind darauf ausgelegt, bestimmte Elemente – Komponenten im Wasser zu eliminieren. Für Stickstoff – N sind Monmorillonit und Clinoptiolit geeignet.


sa dosahuje rovnakými metódami ako je opísané pri tvrdosti vody. Zvýšenie vodivosti detto. Zdrojová voda, ktorú máme k dispozícii disponuje zväčša mierne zásaditým pH pitnej vodovodnej vody je obyčajne okolo 7.5. Pre mnoho rýb je vhodné zvýšiť kyslosť na hodnoty okolo 6.5. Máme niekoľko možností – buď zmeniť pH čisto chemicky, alebo prirodzenejšie. Zmena pH je efektívnejšia vtedy, keď voda obsahuje menej rozpustených látok. Ak obsahuje množstvo solí, zmena pH bude o niečo menšia a prípadné kolísanie tejto hodnoty bude menšie. NaCl – soľ na pH vody je pre akvaristu nehodnotiteľné, pretože ide o soľ silnej zásady – NaOH a silnej kyseliny – HCl, čiže produktov zhruba rovnakej sily, čiže pH neovplyvňuje. Prakticky na pH pôsobí, ale len vďaka tomu, že aj akváriová voda je vodný roztok obsahujúci rôzne látky, s ktorými NaCl reaguje. Toto pôsobenie je však malé a ťažko predpokladateľné.


Reduction of conductivity is achieved by the same methods as described for water hardness. Similarly, increasing conductivity. The source water available to us typically has a slightly alkaline pH, with drinking tap water usually around 7.5. For many fish, it is suitable to increase the acidity to values around 6.5. We have several options – either change the pH purely chemically or more naturally. pH change is more effective when water contains fewer dissolved substances. If it contains a lot of salts, the pH change will be somewhat smaller, and any fluctuations in this value will be smaller. The effect of NaCl – salt on the pH of water is negligible for the aquarist because it is a salt of a strong base – NaOH and a strong acid – HCl, so it does not affect the pH. Practically, NaCl affects pH only because aquarium water is a solution containing various substances with which NaCl reacts. However, this effect is small and difficult to predict.


Die Reduktion der Leitfähigkeit wird durch die gleichen Methoden erreicht wie für die Wasserhärte beschrieben. Ebenso die Erhöhung der Leitfähigkeit. Das Ausgangswasser, das uns zur Verfügung steht, hat in der Regel einen leicht alkalischen pH-Wert, wobei das Trinkwasser aus dem Wasserhahn in der Regel bei etwa 7,5 liegt. Für viele Fische ist es geeignet, die Säure auf Werte um 6,5 zu erhöhen. Wir haben mehrere Möglichkeiten – entweder den pH-Wert rein chemisch zu ändern oder natürlicher. Die pH-Wert-Änderung ist wirksamer, wenn das Wasser weniger gelöste Substanzen enthält. Wenn es viele Salze enthält, wird die pH-Wert-Änderung etwas kleiner sein, und Schwankungen in diesem Wert werden kleiner sein. Die Wirkung von NaCl – Salz auf den pH-Wert des Wassers ist für den Aquarianer vernachlässigbar, da es sich um ein Salz einer starken Base – NaOH und einer starken Säure – HCl handelt und den pH-Wert nicht beeinflusst. Praktisch beeinflusst NaCl den pH-Wert nur, weil das Aquarienwasser eine Lösung ist, die verschiedene Substanzen enthält, mit denen NaCl reagiert. Dieser Effekt ist jedoch gering und schwer vorhersehbar.


Pre zníženie pH je vhodné použitie slabej kyseliny 3-hydrogen fosforečnej – H3PO4. H3PO4 je slabá kyselina. O tom aké množstvo je nutné sa presvedčiť experimentom. Zmena pH akýmkoľvek pôsobením totiž závisí aj obsahu solí, čiastočne od teploty, tlaku. Len veľmi zhruba možno povedať, že ak chceme znížiť pH v 100 litrovej nádrži, aplikujeme H3PO4 rádovo v mililitroch. Použitie iných kyselín neodporúčam, každopádne by sa malo jednať aj z hľadiska vašej bezpečnosti o slabé kyseliny jednoduchého zloženia. H3PO4 je všeobecne používaná látka na zníženie tvrdosti. Ak použijeme H3PO4 dochádza pri tom aj ku týmto reakciám (pri uvedených reakciách je možné vápnik Ca nahradiť za horčík Mg): 2H3PO4 + 3Ca(HCO3)2 = Ca3(PO4)2 + 6H2CO3 – kyselina reaguje s dihydrogenuhličitanom vápenatým za vzniku rozpustného difosforečnanu vápenatého a slabej kyseliny uhličitej. H2CO3 je nestabilná a môže sa rozpadnúť na vodu a . Vzniknutý fosforečnan môže byť hnojivom pre ryby, sinice, alebo , prípadne zdrojom fosforu pre ryby.  2H3PO4 + Ca(HCO3)2 = Ca(H2PO4)2 + 6H2CO3 – vzniká rozpustný dihydrogenfosforečnan vápenatý. H3PO4 + Ca(HCO3)2 = CaHPO4 + 2H2CO3 – vzniká nerozpustný hydrogenfosforečnan vápenatý. Ak by sme predsa len použili silné kyseliny: 2HCl + Ca(HCO3)2 = CaCl2 + 2H2CO3 – reakciou kyseliny chlorovodíkovej (soľnej) vzniká . H2SO4 + Ca(HCO3)2 = CaSO4 + 2H2CO3 – reakciou kyseliny sírovej vzniká síran vápenatý. Ak zdrojová voda obsahuje vápenec, prejaví sa pufračná kapacita vody – uhličitan vápenatý CaCO3 totiž reaguje so vzniknutou kyselinou uhličitou za vzniku hydrogenuhličitanu, čím sa dostávame do kolobehu – vlastne do cyklu kyseliny uhličitej. Týmto spôsobom sú naše možnosti ovplyvniť pH limitované. Na určitý čas sa pH aj v takomto prípade zníži, ale nie nadlho, to závisí najmä na koncentrácii hydrogenuhličitanov (od UT) a množstva použitej kyseliny – je len samozrejmé že pufračná schopnosť má svoje limity. V prípade vysokej tvrdosti vody je účinnejšie použiť neustále pôsobenie CO2.


For reducing pH, it is suitable to use weak phosphoric acid (H₃PO₄). H₃PO₄ is a weak acid. The amount necessary should be determined by experimentation. The pH change by any means also depends on the salt content, partially on temperature, and pressure. It can be roughly estimated that to lower the pH in a 100-liter tank, H₃PO₄ should be applied in milliliters. I do not recommend using other acids; however, for your safety, it should also be a weak acid of simple composition. H₃PO₄ is commonly used to reduce hardness. When using H₃PO₄, the following reactions occur (in the listed reactions, calcium Ca can be replaced with magnesium Mg):

2H₃PO₄ + 3Ca(HCO₃)₂ = Ca₃(PO₄)₂ + 6H₂CO₃ – acid reacts with calcium bicarbonate to form soluble calcium phosphate and weak carbonic acid. H₂CO₃ is unstable and can break down into water and carbon dioxide. The resulting phosphate can be fertilizer for fish, algae, or a source of phosphorus for fish.

2H₃PO₄ + Ca(HCO₃)₂ = Ca(H₂PO₄)₂ + 6H₂CO₃ – soluble dihydrogen phosphate calcium is formed.

H₃PO₄ + Ca(HCO₃)₂ = CaHPO₄ + 2H₂CO₃ – insoluble calcium hydrogen phosphate is formed.

If we were to use strong acids:

2HCl + Ca(HCO₃)₂ = CaCl₂ + 2H₂CO₃ – reaction of hydrochloric acid (muriatic acid) forms calcium chloride.

H₂SO₄ + Ca(HCO₃)₂ = CaSO₄ + 2H₂CO₃ – reaction of sulfuric acid forms calcium sulfate.

If the source water contains limestone, the water’s buffering capacity will be evident – calcium carbonate CaCO₃ reacts with the resulting carbonic acid to form bicarbonate, entering the carbonic acid cycle. In this way, our options to influence pH are limited. pH will decrease for a certain time, but not for long; this mainly depends on the concentration of bicarbonates (from CO₂) and the amount of acid used – it’s obvious that the buffering capacity has its limits. In the case of high water hardness, continuous CO₂ treatment is more effective.


Für die Reduzierung des pH-Werts ist die Verwendung von schwacher Phosphorsäure (H₃PO₄) geeignet. H₃PO₄ ist eine schwache Säure. Die erforderliche Menge sollte durch Experimente ermittelt werden. Die pH-Änderung durch jedes Mittel hängt auch vom Salzgehalt, teilweise von der Temperatur und dem Druck ab. Es kann grob geschätzt werden, dass zur Senkung des pH-Werts in einem 100-Liter-Tank H₃PO₄ in Millilitern verwendet werden sollte. Ich empfehle nicht, andere Säuren zu verwenden; jedoch sollte es aus Sicherheitsgründen auch eine schwache Säure mit einfacher Zusammensetzung sein. H₃PO₄ wird häufig zur Reduzierung der Härte verwendet. Bei der Verwendung von H₃PO₄ treten die folgenden Reaktionen auf (in den aufgeführten Reaktionen kann Calcium Ca durch Magnesium Mg ersetzt werden):

2H₃PO₄ + 3Ca(HCO₃)₂ = Ca₃(PO₄)₂ + 6H₂CO₃ – die Säure reagiert mit Calciumbicarbonat und bildet lösliches Calciumphosphat und schwache Kohlensäure. H₂CO₃ ist instabil und kann in Wasser und Kohlendioxid zerfallen. Das entstehende Phosphat kann Dünger für Fische, Algen oder eine Phosphorquelle für Fische sein.

2H₃PO₄ + Ca(HCO₃)₂ = Ca(H₂PO₄)₂ + 6H₂CO₃ – lösliches Dihydrogenphosphatcalcium entsteht.

H₃PO₄ + Ca(HCO₃)₂ = CaHPO₄ + 2H₂CO₃ – unlösliches Calciumdihydrogenphosphat entsteht.

Wenn wir starke Säuren verwenden würden:

2HCl + Ca(HCO₃)₂ = CaCl₂ + 2H₂CO₃ – Reaktion von Salzsäure (Chlorwasserstoffsäure) bildet Calciumchlorid.

H₂SO₄ + Ca(HCO₃)₂ = CaSO₄ + 2H₂CO₃ – Reaktion von Schwefelsäure bildet Calciumsulfat.

Wenn das Ausgangswasser Kalkstein enthält, wird die Pufferkapazität des Wassers offensichtlich sein – Calciumcarbonat CaCO₃ reagiert mit der entstehenden Kohlensäure zu Bicarbonat und gelangt in den Kohlensäurezyklus. Auf diese Weise sind unsere Möglichkeiten zur Beeinflussung des pH-Werts begrenzt. Der pH-Wert wird für eine bestimmte Zeit sinken, aber nicht lange; dies hängt hauptsächlich von der Konzentration der Bicarbonate (aus CO₂) und der verwendeten Säuremenge ab – es ist offensichtlich, dass die Pufferkapazität ihre Grenzen hat. Bei hoher Wasserhärte ist eine kontinuierliche CO₂-Behandlung wirksamer.


Prirodzene sa dá znížiť pH takisto. Vhodné sú napr. jelšové , zahnívajúce drevo, rašelina, výluh z rašeliny atď. Všetko závisí od poznania druhových nárokov jednotlivých rýb a rastlín. Niektoré ryby neznášajú rašelinový extrakt. Rašelinový výluh sa často používa pre výtery napr. tetrovitých rýb. Rašelina znižuje pH. Zahnívajúce drevo má svoje úskalia. Všeobecne sa však dá povedať najmä pre začínajúcich akvaristov, že použitie rôznych materiálov v akváriu nie je také nebezpečné ako si väčšina z nich myslí. Naopak, svojou dlhodobejšou a pozvoľnou činnosťou je ich účinok na zmenu pH oveľa prijateľnejší ako pri použití čistej chémie. Navyše charakter kyselín, ktoré sa lúhujú z týchto materiálov často blahodarne vplývajú aj na , na rast rastlín. Humínové kyseliny, organické , cheláty a ostatné organické látky, ktoré sú často prirodzenou súčasťou našich rýb a rastlín aj v ich domovine.


Naturally, pH can also be lowered. Suitable options include alder cones, decaying wood, peat, peat extract, etc. However, everything depends on understanding the specific requirements of individual fish and plants. Some fish do not tolerate peat extract. Peat extract is often used for dips, for example, for tetra fish. Peat reduces pH. Decaying wood has its drawbacks. However, it can generally be said, especially for beginning aquarists, that using various materials in the aquarium is not as dangerous as most people think. On the contrary, their long-term and gradual activity makes their effect on pH change much more acceptable than using pure chemicals. Moreover, the nature of the acids leached from these materials often has a beneficial effect on fish health and plant growth. Humic acids, organic complexes, chelates, and other organic substances that are often a natural part of our fish and plants, even in their native habitats, play a role in this process.


Natürlich kann der pH-Wert auch auf natürliche Weise gesenkt werden. Geeignete Optionen sind zum Beispiel Erlenzapfen, verrottendes Holz, Torf, Torfauszug usw. Alles hängt jedoch von der Kenntnis der spezifischen Anforderungen einzelner Fische und Pflanzen ab. Einige Fische vertragen keinen Torfauszug. Torfauszug wird oft für Bäder verwendet, zum Beispiel für Tetra-Fische. Torf senkt den pH-Wert. Verrottendes Holz hat seine Nachteile. Im Allgemeinen kann jedoch besonders für Anfänger-Aquarianer gesagt werden, dass die Verwendung verschiedener Materialien im Aquarium nicht so gefährlich ist, wie die meisten denken. Im Gegenteil, durch ihre langfristige und schrittweise Aktivität ist ihr Einfluss auf die pH-Änderung viel akzeptabler als bei Verwendung reiner Chemikalien. Außerdem haben die Säuren, die aus diesen Materialien ausgelaugt werden, oft einen positiven Einfluss auf die Gesundheit der Fische und das Wachstum der Pflanzen. Huminsäuren, organische Komplexe, Chelate und andere organische Substanzen, die oft natürlicher Bestandteil unserer Fische und Pflanzen sind, auch in ihrer Heimat.


Na zvýšenie pH sa používa sóda bikarbóna – NaHCO3. Čo sa však týka zvyšovanie pH, používa sa v oveľa menšej miere týmto čisto chemickým spôsobom. Prirodzeným spôsobom sa dá zvýšiť pH najlepšie substrátom. obsiahnuté vo vápenci, travertíne posúvajú hodnoty pH až na úroveň nad 8 úplne bežne. Veľmi jednoduchá úprava vody je použitie soli. Ak chceme dosiahnuť stálu hladinu soli, nezabúdajte soľ pri výmene a dolievaní vody dopĺňať. Soľ sa používa pre niektoré druhy rýb, predovšetkým pre brakické druhy. žijú v prírode na prieniku sladkej vody a morskej, napr. v ústiach veľkých riek do mora. Aj pre niektoré živorodky sa odporúča vodu soliť. Živorodky žijú v Južnej a Severnej Amerike vo vodách stredne tvrdých. Vhodná dávka pre je 2-3 polievkové lyžice soli na 40 litrov vody. Pre blackmolly – typický brakický druh ešte o niečo viac – 5 lyžíc na 40 litrov vody. Soľ môžeme použiť kuchynskú aj morskú, ktorú dostať v potravinách. Ak začíname s aplikáciou soli, buďme zo začiatku opatrný, postupujme obozretne, na soľ ryby zvykajme radšej postupne, pretože je zradný. Pri náhlej zmene vodivosti spôsobenej náhlym prírastkom NaCl dôjde k negatívnemu stresu – najmä povrch – koža rýb je náchylná na poškodenie. Táto sa využíva pri liečbe.


To increase pH, baking soda – NaHCO3 is used. However, when it comes to raising pH, this purely chemical method is used to a much lesser extent. Naturally, pH can be best increased by using a substrate. Carbonates contained in limestone, travertine commonly shift pH values ​​to levels above 8. A very simple water adjustment is the use of salt. If we want to achieve a constant level of salt, do not forget to add salt during water changes and top-ups. Salt is used for some types of fish, especially for brackish species. Brackish species live in nature at the intersection of fresh and saltwater, for example, at the mouths of large rivers into the sea. Salt is also recommended for some livebearers. Livebearers live in waters of moderate hardness in South and . The appropriate dosage for guppies is 2-3 tablespoons of salt per 40 liters of water. For black mollies – a typical brackish species – even a little more, 5 tablespoons per 40 liters of water. We can use both table and sea salt, which can be obtained in stores. When starting with salt application, let’s be cautious at first, proceed carefully, and let the fish gradually get used to the salt, as osmotic pressure is tricky. A sudden change in conductivity caused by a sudden increase in NaCl will lead to negative stress – especially the surface – the fish’s skin is susceptible to damage. This property is utilized in treatment.


Um den pH-Wert zu erhöhen, wird Backpulver – NaHCO3 verwendet. Wenn es jedoch darum geht, den pH-Wert zu erhöhen, wird diese rein chemische Methode in viel geringerem Maße verwendet. Natürlich kann der pH-Wert am besten durch die Verwendung eines Substrats erhöht werden. Carbonate, die in Kalkstein und Travertin enthalten sind, verschieben die pH-Werte häufig auf Werte über 8. Eine sehr einfache Möglichkeit der Wasseranpassung ist die Verwendung von Salz. Wenn wir einen konstanten Salzgehalt erreichen wollen, sollten wir nicht vergessen, beim Wasserwechsel und Nachfüllen Salz hinzuzufügen. Salz wird für einige Fischarten verwendet, insbesondere für Brackwasserarten. Brackwasserarten leben in der Natur an der Schnittstelle von Süß- und Salzwasser, zum Beispiel an den Mündungen großer Flüsse ins Meer. Auch für einige lebendgebärende Arten wird Salz empfohlen. Lebendgebärende Arten leben in Gewässern mittlerer Härte in Süd- und Nordamerika. Die richtige Dosierung für Guppys beträgt 2-3 Esslöffel Salz pro 40 Liter Wasser. Für schwarze Mollys – eine typische Brackwasserart – etwas mehr, 5 Esslöffel pro 40 Liter Wasser. Wir können sowohl Tafel- als auch Meersalz verwenden, das in Geschäften erhältlich ist. Wenn wir mit der Anwendung von Salz beginnen, sollten wir zuerst vorsichtig vorgehen, vorsichtig vorgehen und die Fische allmählich an das Salz gewöhnen, da der osmotische Druck tückisch ist. Eine plötzliche Änderung der Leitfähigkeit durch einen plötzlichen Anstieg von NaCl führt zu negativem Stress – insbesondere die Oberfläche – die Haut der Fische ist anfällig für Schäden. Diese Eigenschaft wird bei der Behandlung genutzt.


Soľ sa odporúča afrických jazerným cichlidám. Obsahujú pomerne vysoké koncentrácie sodíka – Na. V literatúre sa uvádza až 0.5 kg na 100 litrov vody, ja odporúčam jednu polievkovú lyžicu na 40 litrov vody. Soľ pôsobí zrejme ako transportér metabolických procesov a katalyzátor. NaCl najskôr disociuje na katión sodíka a anión chlóru. Chlór pôsobí ako dezifenkcia a sodík sa podieľa na biologických reakciách. Organické farbivá, liečivá môžeme úspešne odstrániť aktívnym uhlím, čiastočne rašelinou. Aktívne uhlie vôbec má široké pole uplatnenia. Je pomerne účinnou prevenciou voči nákaze, pretože adsorbuje na seba množstvo škodlivín. Funguje ako filter. Má takú štruktúru, že oplýva obrovským povrchom, jeden mm3 poskytuje až 100 – 150 m2 plochy. Používa sa aj v komerčne predávaných filtroch. Dokáže čiastočne znížiť aj tvrdosť vody. Treba si však uvedomiť, že jeho pôsobenie je najmä v nádržiach s rastlinami nežiaduce práve kvôli svojej adsorpčnej schopnosti. Aktívne uhlie totiž okrem iného odoberá rastlinám . Samozrejme, jeho schopnosti sú vyčerpateľné – po istom čase sa kapacita nasýti a je nutné aktívne uhlie buď regenerovať, alebo vymeniť. Regenerácia je proces chemický, pre akvaristu príliš nákladný, vlastne zbytočný. Čiastočne by sa dalo regenerovať aktívne uhlie varom, ale aj to je dosť nepriechodné. Ak máme k dispozícii práškovú formu aktívneho uhlia, máme vyhrané – jeho účinnosť je prakticky najvyššia a môžeme ho teda použiť najmenší objem. Riešením je implementácia do filtra, ale aj napr. nasypanie do pančuchy a umiestnenie do . Ak sa nám časť rozptýli, nezúfajme, aktívne uhlie je neškodné, vodu nekalí.


Salt is recommended for African lake cichlids. They contain relatively high concentrations of sodium – Na. In literature, up to 0.5 kg per 100 liters of water is mentioned, but I recommend one tablespoon per 40 liters of water. Salt appears to act as a transporter of metabolic processes and a catalyst. NaCl dissociates first into sodium cation and anion. Chlorine acts as a disinfectant, and sodium participates in biological reactions. Organic dyes, drugs can be successfully removed by activated carbon, partially by peat. Activated carbon has a wide range of applications. It is a relatively effective prevention against infection because it adsorbs a lot of harmful substances. It works as a filter. It has such a structure that it has a huge surface area, one mm3 provides up to 100 – 150 m2 of area. It is also used in commercially available filters. It can also partially reduce water hardness. However, it should be realized that its action is undesirable, especially in tanks with plants, due to its adsorption capacity. Activated carbon also removes nutrients from plants. Of course, its capabilities are exhaustible – after some time, the capacity becomes saturated, and it is necessary to either regenerate or replace the activated carbon. Regeneration is a chemical process, too costly for the aquarist, actually unnecessary. Activated carbon could be partially regenerated by boiling, but this is quite impractical. If we have powdered activated carbon available, we have won – its efficiency is practically the highest, and therefore we can use the smallest volume. The solution is to implement it into the filter, but also for example, to pour it into a stocking and place it in the tank. If some of it disperses, do not despair, activated carbon is harmless, it does not cloud the water.


Salz wird afrikanischen Seebuntbarschen empfohlen. Sie enthalten relativ hohe Natriumkonzentrationen – Na. In der Literatur wird bis zu 0,5 kg pro 100 Liter Wasser erwähnt, aber ich empfehle einen Esslöffel pro 40 Liter Wasser. Salz scheint als Transporteur von Stoffwechselprozessen und als Katalysator zu wirken. NaCl dissoziiert zuerst in Natrium-Kation und Chlorid-Anion. Chlor wirkt als Desinfektionsmittel, und Natrium nimmt an biologischen Reaktionen teil. Organische Farbstoffe, Medikamente können erfolgreich durch Aktivkohle, teilweise durch Torf entfernt werden. Aktivkohle hat eine Vielzahl von Anwendungen. Es ist eine relativ effektive Vorbeugung gegen Infektionen, da es viele schädliche Substanzen adsorbiert. Es funktioniert wie ein Filter. Es hat eine Struktur, die eine riesige Oberfläche bietet, ein mm3 bietet bis zu 100 – 150 m2 Fläche. Es wird auch in kommerziell erhältlichen Filtern verwendet. Es kann auch den Härtegrad des Wassers teilweise reduzieren. Es sollte jedoch erkannt werden, dass seine Wirkung in Tanks mit Pflanzen unerwünscht ist, aufgrund seiner Adsorptionskapazität. Aktivkohle entfernt auch Nährstoffe aus Pflanzen. Natürlich sind ihre Fähigkeiten begrenzt – nach einiger Zeit wird die Kapazität gesättigt, und es ist notwendig, die Aktivkohle zu regenerieren oder zu ersetzen. Die Regeneration ist ein chemischer Prozess, zu teuer für den Aquarianer, eigentlich unnötig. Aktivkohle könnte teilweise durch Kochen regeneriert werden, aber das ist ziemlich unpraktisch. Wenn etwas davon zerstreut wird, verzweifeln Sie nicht, Aktivkohle ist harmlos, sie trübt das Wasser nicht.


Vo vode z vodovodnej siete sa nachádzajú rôzne plynné zložky, ktoré sú určené predovšetkým pre dezifenkciu. Pre človeka sú nutnosťou, ale z hľadiska života v je ich vplyv nežiaduci. Jedným z týchto plynov je všeobecne známy chlór. Je do jedovatý plyn, aj pre človeka, ktorý však v nízkych dávkach človeku neškodí a zabíja baktérie. Pitná voda ho obsahuje obyčajne 0.1 – 0.2 mg/l, maximálne do 0.5 mg/l. Chlór škodí najmä žiabram rýb. Na to, aby sme sa chlóru zbavili, je napr. odstátie vhodné. Existujú na trhu prípravky na báze thiosíranu sodného – Na2S2O3, ktoré dokážu zbaviť vody chlóru. Odstátím vody sa zbavíme chlóru približne za jeden deň. Vode len musíme dovoliť, aby mali kade unikať – takže žiadne uzavreté bandasky. Čiastočne pri okamžitom napúšťaní vody, pomôže čo najdlhší transport vody v hadici. Značná časť chlóru sa takto odparí. Vo vode sa nachádzajú aj iné plyny – k dokonalému odplyneniu odstátím dôjde po štyroch dňoch. Pre výtery niektorých druhov sa používajú rôzne , napr. výluhy vodných rastlín. Tie dokážu vodu doslova pripraviť – stabilizovať, poskytnúť žiadané látky, napr. stopové látky, resp. dokáže snáď viazať prípadne škodlivejšie súčasti. Používa sa aj drevo, dub, jelša, vŕba. Hodí sa aj hnedé uhlie. Rašelina funguje ako čiastočný adsorbent. Na druhej strane vode dodáva humínové kyseliny a iné organické látky. Najmä v poslednej dobe sa využíva ultrafialové na úpravu vody. Často aj na jej sterilizáciu od choroboplodných zárodkov. Môže sa využiť aj tým spôsobom – kedy zasahuje celý objem vody – napr. v prípade akútnej choroby, no zväčša sa UV lampa používa ako filter, ktorý účinne zbavuje vodu rozličných zárodkov organizmov. Voda ošetrená dostatočne silnou UV lampou sa napr. nezariasuje. Jej použitie eliminuje na minimum. UV možno dostať bežne na trhu s akvaristickými potrebami. Ako silnú lampu – s akým príkonom nám určuje objem nádrže. UV lampu neodporúčam používať nepretržite.


In the water from the municipal water supply, various gaseous components are present, primarily intended for disinfection. They are essential for humans, but their impact on aquarium life is undesirable. One of these gases is chlorine, which is a well-known toxic gas, even for humans, but in low doses, it is harmless to humans and kills bacteria. Drinking water usually contains chlorine in the range of 0.1 – 0.2 mg/l, with a maximum of up to 0.5 mg/l. Chlorine is particularly harmful to fish gills. To rid water of chlorine, for example, letting it stand is suitable. There are products on the market based on sodium thiosulfate – Na2S2O3, which can remove chlorine from water. Allowing water to stand will rid it of chlorine in approximately one day. We just need to allow gases to escape – so no closed containers. Partially, immediate water filling will help, with the longest possible transport of water in the hose. A significant portion of chlorine will evaporate this way. There are also other gases in the water – complete degassing by standing occurs after four days. Various infusions are used for the swabs of some species, such as infusions of aquatic plants. These can literally prepare water – stabilize it, provide desired substances, such as trace elements, or possibly bind more harmful components. Wood is also used, oak, alder, willow. Brown coal is also suitable. Peat acts as a partial adsorbent. On the other hand, it adds humic acids and other organic substances to the water. Especially recently, ultraviolet light has been used for water treatment. Often also for its sterilization from pathogens. It can also be used in such a way – when the entire volume of water is affected – for example, in the case of an acute disease, but usually, the UV lamp is used as a filter, which effectively rids the water of various organism pathogens. Water treated with a sufficiently strong UV lamp, for example, does not become cloudy. Its use minimizes microbial infections. UV lamps are readily available on the market for aquarium supplies. As for a strong lamp – the wattage is determined by the volume of the tank. I do not recommend using the UV lamp continuously.


Im Wasser aus der städtischen Wasserversorgung sind verschiedene gasförmige Bestandteile vorhanden, die hauptsächlich zur Desinfektion bestimmt sind. Sie sind für Menschen unerlässlich, aber ihr Einfluss auf das Aquariumleben ist unerwünscht. Eines dieser Gase ist Chlor, das ein bekanntes giftiges Gas ist, auch für Menschen, aber in geringen Dosen ist es für Menschen harmlos und tötet Bakterien ab. Trinkwasser enthält normalerweise Chlor im Bereich von 0,1 – 0,2 mg/l, maximal bis zu 0,5 mg/l. Chlor ist besonders schädlich für die Kiemen der Fische. Um Wasser von Chlor zu befreien, ist es beispielsweise geeignet, es stehen zu lassen. Es gibt Produkte auf dem Markt, die auf Natriumthiosulfat – Na2S2O3, basieren und Chlor aus Wasser entfernen können. Das Stehenlassen von Wasser wird es in ungefähr einem Tag von Chlor befreien. Wir müssen nur den Gasen erlauben zu entweichen – also keine geschlossenen Behälter. Teilweise wird das sofortige Befüllen mit Wasser helfen, mit dem längstmöglichen Transport von Wasser im Schlauch. Auf diese Weise verdunstet ein erheblicher Teil des Chlors. Es gibt auch andere Gase im Wasser – das vollständige Entgasen durch Stehenlassen erfolgt nach vier Tagen. Für Abstriche einiger Arten werden verschiedene Infusionen verwendet, wie z.B. Infusionen von Wasserpflanzen. Diese können das Wasser buchstäblich vorbereiten – es stabilisieren, gewünschte Substanzen bereitstellen, wie z.B. Spurenelemente, oder möglicherweise schädlichere Komponenten binden. Auch Holz wird verwendet, Eiche, Erle, Weide. Braunkohle ist ebenfalls geeignet. Torf wirkt als teilweiser Adsorbens. Auf der anderen Seite fügt es dem Wasser Huminsäuren und andere organische Substanzen hinzu. Besonders in letzter Zeit wird ultraviolettes Licht zur Wasseraufbereitung verwendet. Oft auch zur Sterilisation von Krankheitserregern. Es kann auch so verwendet werden – wenn das gesamte Wasservolumen betroffen ist – zum Beispiel im Fall einer akuten Krankheit, aber in der Regel wird die UV-Lampe als Filter verwendet, der das Wasser effektiv von verschiedenen Organismus-Erregern befreit. Wasser, das mit einer ausreichend starken UV-Lampe behandelt wird, wird zum Beispiel nicht trüb. Ihr Einsatz minimiert mikrobielle Infektionen. UV-Lampen sind auf dem Markt für Aquariumzubehör leicht erhältlich. Was eine starke Lampe betrifft – die Leistung wird durch das Volumen des Tanks bestimmt. Ich empfehle nicht, die UV-Lampe kontinuierlich zu verwenden.

Akvaristika, Biológia, Akvaristická technika

Vzduchovanie a kyslík vo vode

Hits: 36808

Kyslík je , ktorý sa v našich mysliach spája so životom. Primárnym zdrojom kyslíka sú rastliny. Vo vode je ho oveľa menej ako vo vzduchu. kyslíka vo vode je závislá od teploty . Čím je teplota v akváriu vyššia, tým je koncentrácia O2 nižšia. Pri teplote 10 °C pri bežnom tlaku je vo vode rozpustených asi 11.3 mg O2 v litri, pri teplote – 8.3 mg/l a pri 30 °C – 7.6 mg/l. Do vody sa okrem pôsobenia vodných rastlín dostáva aj difúziou zo vzduchu, premiešavaním, čerením hladiny. Kyslík sa spotrebúva v akváriu hlavne rozkladnou činnosťou mikroorganizmov – v substráte dna. Ak je málo prevzdušnené, môže dôjsť k jeho deficitu a tým k jeho vyčerpaniu pre a . Kyslík napomáha rozkladu hmoty. Čistý, 100 % koncentrovaný kyslík je pre ľudský organizmus jedovatý, takže ak hovorím o kyslíku v so vzduchovaním, ide samozrejme o . Vzduch obsahuje aj veľa dusíka a . Rastlinám kyslík až tak veľmi „nevonia“, najmä nie cez deň a za dostatočného prísunu svetelnej . Aj ak spôsobuje veľký , rastlinám to neprospieva. Naopak cez noc, kedy rastliny kyslík prijímajú by bol pre ne kyslík vítaný. Cez deň rastliny prijímajú – ide o proces fotosyntézy a z nej vyplývajúcich procesov ako napr. , , N, apod. Vzduchovanie homogenizuje vodu v akváriu, zabezpečuje vody, miešanie jednotlivých vrstiev, najmä vertikálnym smerom. Množstvo kyslíka, ktoré dokáže vzduchovanie odovzdať akváriu je pomerne nízke – vo vode je rádovo štyri krát nižšia ako vo vzduchu. Darmo budeme vytvárať veľké bublinky, tie síce viac rozprúdia vodu, ale množstvo prijatého kyslíka vodou bude nižšie ako keby produkovali . Množstvo takto prijatého kyslíka závisí povrchu bubliniek, ktorý je vyšší pri menších bublinkách.

Vzduchovací kameň môže mať rôzny tvar. Môže to byť valec, gulička, môže byť podlhovastý, až 105 cm dlhý. Existujú tvaru obvodu kruhu. Podobne ako vzduchovací kameň je možné použiť lipové drievko, ktoré tvorí . Jeho nevýhoda je vtom, že sa v ňom rýchlo uzavrú. Používa sa skôr pri difúzii CO2 – pri hnojení rastlín. Navyše sa lipové drievko rozkladá a obrastá riasami. Určite neopomenuteľným spôsobom transportu kyslíka do vody je , ktoré spôsobuje buď vzduchovanie cez kameň, alebo filter. Väčšina návodov na používanie filtra odporúča umiestniť filter tak, aby vývod vody bol na hladinou alebo tesne pod ňou. Aj takto sa dostáva kyslík do vody. Na vzduchovanie sa v akvaristike používajú dmychadlá, z ktorých je vzduch poháňaný vzduch do hadičiek buď do vzduchovacích kameňov, alebo do filtrov. Ja používam niekoľko typov motorčekov o rôznej sile. by malo byť umiestnené nad všetkými hladinami, do ktorých vháňa vzduch, aby sa predišlo pri výpadku prúdu samospádovému vniknutiu vody do kompresora. V prípade, že nie je možné kompresor takto umiestniť, hadičku na jej ceste od kompresora ku akváriám najprv vedieme meter nad úroveň najvyššej hladiny, alebo zabezpečíme iné technické riešenie, ktoré zabráni nasávaniu vody, napr. použijem spätný ventil. Ak sa niekedy stretnete s pojmom korytnačka, tak vedzte že možno pôjde o väčšie dmychadlo, ktoré je pre väčší priemer trubky, resp. (napr. záhradnej). Často sa používa tam, kde je viacej nádrží. Druhá možnosť je vzduchovať cez filter. Niektoré dokážu otvorom vo vrchnej časti filtra nasávať cez pripojenú hadičku vzduch. Ja to využívam, a považujem tento spôsob sa lepší, funkčnejší. Hadička sa dá priškrtiť podľa , aby poskytovala vzduch ako vám vyhovuje. Takto prispôsobené vzduchovanie má lepší efekt, pretože bublinky sú vháňané do vody vodorovne a sú menšie ak to potrebujeme. Zrejme aj tým, že majú istú zotrvačnosť a malý , ich presun na hladinu a teda vyparenie trvá oveľa dlhšie než pri vzduchovaní kameňom. plynov do vody je účinnejšia, pretože trvá dlhšie a prebieha na väčšom povrchu.


Oxygen is a gas that we associate with life in our minds. Plants are the primary source of oxygen. There is much less oxygen in water than in the air. The concentration of oxygen in water depends on the water temperature. The higher the temperature in the aquarium, the lower the concentration of . At a temperature of 10 °C at normal pressure, there are about 11.3 mg of O2 dissolved in a liter of water, at a temperature of 25 °C – 8.3 mg/l, and at 30 °C – 7.6 mg/l. Oxygen enters the water not only through the action of aquatic plants but also through diffusion from the air, mixing, and surface agitation. Oxygen is mainly consumed in the aquarium by the decomposition activity of microorganisms in the substrate. If the substrate is poorly aerated, this can lead to a deficiency and depletion of oxygen for fish and plants. Oxygen promotes the breakdown of matter. Pure, 100% concentrated oxygen is toxic to the human body, so when I talk about oxygen in the context of aeration, I’m referring, of course, to air. Air also contains a lot of nitrogen and CO2. Plants don’t „like“ oxygen all that much, especially not during the day and with sufficient supply of light energy. Even though aeration causes significant water movement, is not beneficial for plants. On the contrary, oxygen would be welcome for them during the night when plants absorb oxygen. During the day, plants absorb carbon dioxide – this is the process of photosynthesis and the resulting processes such as the Krebs cycle, the C cycle, N cycle, etc. Aeration homogenizes the water in the aquarium, provides water movement, and mixes individual layers, especially vertically. The amount of oxygen that aeration can deliver to the aquarium is relatively low – the diffusion of gases in water is orders of magnitude lower than in air. It is pointless to create large bubbles; although they may agitate the water more, the amount of oxygen absorbed by the water will be lower than if we produced smaller bubbles. The amount of oxygen absorbed in this way depends on the surface area of the bubbles, which is higher with smaller bubbles.

An airstone can have various shapes. It can be cylindrical, spherical, or elongated, up to 105 cm long. There are stones shaped like the circumference of a circle. Similarly to an airstone, a wood diffuser can be used, which creates small bubbles. Its disadvantage is that the pores in it close quickly. It is used more for CO2 diffusion – for plant fertilization. Moreover, the wood diffuser decomposes and becomes covered with . Another essential way to transport oxygen into the water is surface agitation, which either aerates through the stone or filter. Most filter usage instructions recommend placing the filter so that the water outlet is at or just below the surface. This way, oxygen gets into the water. In aquaristics, air pumps are used for aeration, from which air is driven through tubes either to airstones or filters. I use several types of air pumps of varying power. The air pump should be positioned above all water levels into which it delivers air to prevent water from entering the compressor in the event of a power outage. If it is not possible to place the compressor in this way, the tube on its way from the compressor to the aquarium is led one meter above the highest water level, or another technical solution is provided to prevent water from entering, for example, I use a check valve. If you ever come across the term „turtle,“ it might refer to a larger air pump designed for a larger pipe or hose (.g., garden). It is often used where there are multiple tanks. Another option is to aerate through the filter. Some filters can draw air through a connected tube into the upper part of the filter. I use this method and consider it better and more functional. The tube can be adjusted as needed to provide air as you like. This adapted aeration has a better effect because the bubbles are introduced into the water horizontally and are smaller if needed. Probably also because they have a certain inertia and a small volume, their movement to the surface and therefore evaporation takes much longer than with stone aeration. Gas diffusion into the water is more effective because it takes longer and occurs over a larger surface area.


Sauerstoff ist ein Gas, das wir in unseren Köpfen mit Leben verbinden. Pflanzen sind die primäre Quelle für Sauerstoff. Im Wasser gibt es viel weniger Sauerstoff als in der Luft. Die Konzentration von Sauerstoff im Wasser hängt von der Wassertemperatur ab. Je höher die Temperatur im Aquarium ist, desto geringer ist die Konzentration von O2. Bei einer Temperatur von 10 °C bei normalem Druck gibt es etwa 11,3 mg O2 pro Liter Wasser, bei einer Temperatur von 25 °C – 8,3 mg/l und bei 30 °C – 7,6 mg/l. Sauerstoff gelangt nicht nur durch die Wirkung von Wasserpflanzen ins Wasser, sondern auch durch Diffusion aus der Luft, durch Vermischung und Oberflächenbewegung. Sauerstoff wird im Aquarium hauptsächlich durch die Zersetzungsaktivität von Mikroorganismen im Substrat verbraucht. Ist das Substrat schlecht belüftet, kann dies zu einem Mangel und einer Erschöpfung von Sauerstoff für Fische und Pflanzen führen. Sauerstoff fördert den Abbau von Materie. Reiner, 100% konzentrierter Sauerstoff ist für den menschlichen Körper giftig, daher meine ich, wenn ich über Sauerstoff im Zusammenhang mit Belüftung spreche, natürlich Luft. Luft enthält auch viel Stickstoff und CO2. Pflanzen „mögen“ Sauerstoff nicht so sehr, besonders nicht tagsüber und bei ausreichender Lichtenergie. Auch wenn die Belüftung zu einer erheblichen Wasserbewegung führt, ist dies nicht förderlich für Pflanzen. Im Gegenteil, Sauerstoff wäre für sie während der Nacht, in der Pflanzen Sauerstoff aufnehmen, willkommen. Tagsüber nehmen Pflanzen Kohlendioxid auf – dies ist der Prozess der Photosynthese und der daraus resultierenden Prozesse wie dem Citratzyklus, dem C-Zyklus, dem N-Zyklus usw. Belüftung homogenisiert das Wasser im Aquarium, sorgt für Wasserbewegung und mischt einzelne Schichten, insbesondere vertikal. Die Menge an Sauerstoff, die Belüftung dem Aquarium zuführen kann, ist relativ gering – die Diffusion von Gasen im Wasser ist um Größenordnungen geringer als in der Luft. Es ist sinnlos, große Blasen zu erzeugen; obwohl sie das Wasser mehr bewegen können, ist die Menge an Sauerstoff, die das Wasser aufnimmt, geringer als bei kleineren Blasen. Die Menge an auf diese Weise aufgenommenem Sauerstoff hängt von der Oberfläche der Blasen ab, die bei kleineren Blasen höher ist.

Ein Luftstein kann verschiedene Formen haben. Er kann zylindrisch, kugelförmig oder länglich bis zu 105 cm lang sein. Es gibt Steine in Form des Umfangs eines Kreises. Ähnlich wie ein Luftstein kann ein Holzdiffusor verwendet werden, der kleine Blasen erzeugt. Sein Nachteil ist, dass sich die Poren darin schnell schließen. Es wird eher für die CO2-Diffusion – zur Pflanzendüngung verwendet. Außerdem zersetzt sich der Holzdiffusor und wird von Algen überzogen. Eine weitere wichtige Möglichkeit, Sauerstoff ins Wasser zu transportieren, ist die Oberflächenbewegung, die entweder durch den oder den Filter belüftet. Die meisten Anweisungen zur Filterverwendung empfehlen, den Filter so zu platzieren, dass der Wasserablauf auf oder knapp unter der Oberfläche liegt. So gelangt Sauerstoff ins Wasser. In der Aquaristik werden Luftkompressoren zur Belüftung verwendet, aus denen Luft durch Schläuche entweder zu Luftsteinen oder Filtern geleitet wird. Ich verwende mehrere Arten von Luftkompressoren unterschiedlicher Leistung. Der Luftkompressor sollte über allen Wasserständen platziert werden, in die er Luft abgibt, um zu verhindern, dass Wasser bei einem Stromausfall in den Kompressor gelangt. Ist es nicht möglich, den Kompressor auf diese Weise zu platzieren, wird das Rohr auf seinem Weg vom Kompressor zum Aquarium zunächst einen Meter über dem höchsten Wasserstand geführt, oder es wird eine andere technische Lösung bereitgestellt, um das Eindringen von Wasser zu verhindern, zum Beispiel verwende ich ein Rückschlagventil. Wenn Sie jemals auf den Begriff „Schildkröte“ stoßen, könnte dies sich auf eine größere Luftpumpe für ein größeres Rohr oder einen Schlauch (z.B. Garten) beziehen. Es wird oft dort verwendet, wo es mehrere Tanks gibt. Eine andere Möglichkeit ist die Belüftung durch den Filter. Einige Filter können Luft durch einen angeschlossenen Schlauch in den oberen Teil des Filters ziehen. Ich verwende diese Methode und halte sie für besser und funktionaler. Der Schlauch kann je nach Bedarf angepasst werden, um Luft zu liefern, wie es Ihnen gefällt. Diese angepasste Belüftung hat eine bessere Wirkung, weil die Blasen horizontal in das Wasser eingeführt werden und kleiner sind, wenn nötig. Wahrscheinlich auch, weil sie eine gewisse Trägheit und ein kleines Volumen haben, dauert ihre Bewegung zur Oberfläche und damit die Verdunstung viel länger als bei Steinbelüftung. Die Gasdiffusion ins Wasser ist effektiver, weil sie länger dauert und über eine größere Oberfläche stattfindet.