Akvaristika, Údržba

Úprava vody

Hits: 36009

Pri úpra­ve vody je nut­né byť obo­zret­ný. Vhod­né sú vedo­mos­ti z ché­mie. Je nut­né si uve­do­miť, že bez zod­po­ved­nos­ti voči živým orga­niz­mom nie je etic­ké pri­stu­po­vať ku expe­ri­men­tom pri zme­nách para­met­rov vody. Uži­toč­né je obo­zná­miť sa s para­met­ra­mi vody. Kva­li­ta­tív­ne všet­ky zme­ny sa dajú vyko­nať mie­ša­ním s vodou iných vlast­nos­tí. Mera­niu para­met­rov vody, úpra­ve tvrdo­s­ti, pH sa čas­to vkla­dá prí­liš veľ­ký význam. Ryby cho­va­né už gene­rá­cie v zaja­tí sú čas­to pris­pô­so­be­né našim pod­mien­kam. Nie je prvo­ra­dé, aby ryby a rast­li­ny žili vo vode s takým pH a hod­no­tou tvrdo­s­ti v akej žijú v prí­ro­de, ale aby sme spl­ni­li čo naj­viac pod­mie­nok pre ich úspeš­ný roz­voj. Neutá­paj­te sa v neus­tá­lom mera­ní a poku­soch o zme­nu. Pre bež­nú akva­ris­tic­kú prax sa para­met­re vody preceňujú.


When tre­a­ting water, cau­ti­on is neces­sa­ry. Kno­wled­ge of che­mis­try is use­ful. It is neces­sa­ry to rea­li­ze that wit­hout res­pon­si­bi­li­ty towards living orga­nisms, it is not ethi­cal to app­ro­ach expe­ri­ments with chan­ges in water para­me­ters. It is use­ful to fami­lia­ri­ze one­self with the para­me­ters of water. Quali­ta­ti­ve­ly, all chan­ges can be made by mixing with water of dif­fe­rent pro­per­ties. Moni­to­ring water para­me­ters, adjus­ting hard­ness, and pH are often ove­remp­ha­si­zed. Fish bred for gene­ra­ti­ons in cap­ti­vi­ty are often adap­ted to our con­di­ti­ons. It is not para­mount for fish and plants to live in water with the same pH and hard­ness as they do in natu­re, but to meet as many con­di­ti­ons as possib­le for the­ir suc­cess­ful deve­lop­ment. Do not get lost in cons­tant mea­su­re­ments and attempts to chan­ge. For regu­lar aqu­arium prac­ti­ce, water para­me­ters are overrated.


Bei der Auf­be­re­i­tung von Was­ser ist Vor­sicht gebo­ten. Kenn­tnis­se in Che­mie sind nütz­lich. Es ist not­wen­dig zu erken­nen, dass es nicht ethisch ist, ohne Verant­wor­tung gege­nüber leben­den Orga­nis­men Expe­ri­men­te mit Verän­de­run­gen der Was­ser­pa­ra­me­ter dur­ch­zu­füh­ren. Es ist nütz­lich, sich mit den Para­me­tern des Was­sers ver­traut zu machen. Quali­ta­tiv kön­nen alle Verän­de­run­gen durch Mis­chen mit Was­ser ande­rer Eigen­schaf­ten vor­ge­nom­men wer­den. Die Über­wa­chung der Was­ser­pa­ra­me­ter, die Anpas­sung der Här­te und des pH-​Werts wer­den oft über­be­tont. Fis­che, die seit Gene­ra­ti­onen in Gefan­gen­schaft gezüch­tet wur­den, sind oft an unse­re Bedin­gun­gen ange­passt. Es ist nicht ents­che­i­dend, dass Fis­che und Pflan­zen in Was­ser mit dem gle­i­chen pH-​Wert und der gle­i­chen Här­te leben wie in der Natur, son­dern dass mög­lichst vie­le Bedin­gun­gen für ihre erfolg­re­i­che Ent­wick­lung erfüllt wer­den. Ver­lie­ren Sie sich nicht in stän­di­gen Mes­sun­gen und Ver­su­chen, etwas zu ändern. Für die regel­mä­ßi­ge Aqu­arium­pra­xis wer­den die Was­ser­pa­ra­me­ter überbewertet.


Zvy­šo­va­nie tep­lo­ty vody ohrie­va­čom je pomer­ne bež­né aj v iných oblas­tiach, nie­len v akva­ris­ti­ke. Ďale­ko ťaž­ší prob­lém je však ako vodu ochla­dzo­vať. Túto otáz­ku rie­šia naj­mä akva­ris­ti zaobe­ra­jú­ci sa cho­vom mor­ských živo­čí­chov. Tu sa ponú­ka mož­nosť využiť prin­cíp pel­tie­ro­vých člán­kov. Pomô­že star­šia mraz­nič­ka, chla­dia­ren­ský prí­stroj a šikov­ný maj­ster. Dru­há mož­nosť je nákup v obcho­de. Ochla­dzo­va­nie vody tým­to spô­so­bom je finanč­ne pomer­ne nároč­né. V malom merít­ku je mož­né využiť ľad, je to však nebez­peč­né – pre­to­že na roz­púš­ťa­nie ľadu je potreb­né veľa ener­gie, Ľad je pev­ná lát­ka a oplý­va tepel­nou kapa­ci­tou – na pre­chod do kva­pal­né­ho sta­vu je nut­né viac ener­gie pri rov­na­kom posu­ne tep­lôt. Postu­puj­me pre­to opatr­ne, aby sme nemu­se­li vyskú­šať tep­lot­né extrémy.


Rai­sing the water tem­pe­ra­tu­re with a hea­ter is quite com­mon in vari­ous are­as, not just in aqu­ariums. Howe­ver, a far more chal­len­ging prob­lem is how to cool the water. This ques­ti­on is pri­ma­ri­ly add­res­sed by aqu­arists dea­ling with the bre­e­ding of mari­ne orga­nisms. Here, the opti­on to uti­li­ze the prin­cip­le of Pel­tier cells pre­sents itself. An old fre­e­zer, ref­ri­ge­ra­ti­on devi­ce, and a skil­led crafts­man can help. The second opti­on is pur­cha­sing from a sto­re. Cooling water in this way is finan­cial­ly deman­ding. On a small sca­le, ice can be used, but it is dan­ge­rous – becau­se mel­ting ice requ­ires a lot of ener­gy. Ice is a solid sub­stan­ce and has a high ther­mal capa­ci­ty – it requ­ires more ener­gy to trans­i­ti­on to a liqu­id sta­te for the same tem­pe­ra­tu­re chan­ge. Let’s pro­ce­ed cau­ti­ous­ly so we don’t have to expe­rien­ce tem­pe­ra­tu­re extremes.


Das Erhöhen der Was­ser­tem­pe­ra­tur mit einem Heiz­ge­rät ist in vers­chie­de­nen Bere­i­chen recht verb­re­i­tet, nicht nur in Aqu­arien. Ein weit sch­wie­ri­ge­res Prob­lem ist jedoch, wie man das Was­ser kühlt. Die­se Fra­ge wird haupt­säch­lich von Aqu­aria­nern behan­delt, die sich mit der Zucht von Mee­res­tie­ren bes­chäf­ti­gen. Hier bie­tet sich die Mög­lich­ke­it, das Prin­zip der Peltier-​Zellen zu nut­zen. Ein alter Gef­riers­chrank, ein Kühl­sys­tem und ein ges­chic­kter Han­dwer­ker kön­nen hel­fen. Die zwe­i­te Opti­on ist der Kauf im Ges­chäft. Das Küh­len des Was­sers auf die­se Wei­se ist finan­ziell ans­pruchs­voll. Im kle­i­nen Maßs­tab kann Eis ver­wen­det wer­den, aber es ist gefähr­lich – denn das Sch­mel­zen von Eis erfor­dert viel Ener­gie. Eis ist ein fes­ter Stoff und hat eine hohe Wär­me­ka­pa­zi­tät – es erfor­dert mehr Ener­gie, um den Über­gang in einen flüs­si­gen Zus­tand für die gle­i­che Tem­pe­ra­tu­rän­de­rung zu bewir­ken. Gehen wir also vor­sich­tig vor, damit wir nicht extre­me Tem­pe­ra­tu­ren erle­ben müssen.


Ak chce­me meniť tvrdo­sť vody, bež­ný­mi lac­ný­mi pros­tried­ka­mi vie­me zabez­pe­čiť len jej zvý­še­nie. Obsah váp­ni­ka a hor­čí­ka zvý­ši­me uhli­či­ta­nom vápe­na­tým – CaCO3, uhli­či­ta­nom horeč­na­tým – MgCO3, síra­nom vápe­na­tým – CaSO4, síra­nom horeč­na­tým – MgSO4, chlo­ri­dom vápe­na­tým – CaCl2. Pri­ro­dze­ne napr. vápen­com. Avšak ak chce­me dosiah­nuť rých­lu zme­nu musí­me pou­žiť sil­nej­šiu kon­cen­trá­ciu. Napo­kon je dostať aj účin­né komerč­né pre­pa­rá­ty, kto­ré doká­žu rých­lo tvrdo­sť zvý­šiť. Pred ove­ľa ťaž­šou otáz­kou sto­jí­me ak sme si zau­mie­ni­li tvrdo­sť zní­žiť. Je mož­né pou­žiť vyzrá­ža­nie kyse­li­nou šťa­ve­ľo­vou, no rov­no­vá­ha toh­to pro­ce­su je malá. Ak by sme však doká­za­li túto vodu mecha­nic­ky veľ­mi jem­ným fil­trom odfil­tro­vať, mož­no by sme dosiah­li žia­da­ný výsle­dok. Vare­nie vody za úče­lom zní­že­nia tvrdo­s­ti je veľ­mi neeko­no­mic­ké. Efekt je mizi­vý. Varom vyzrá­ža­me len uhli­či­ta­no­vú tvrdo­sť a to maxi­mál­ne o 2.7 °dKH. Okrem toho varom ničí­me aj ten kúsok živo­ta, kto­rý vo vode je, pre­to var neod­po­rú­čam. Aktív­ne uhlie čias­toč­ne zni­žu­je tvrdo­sť vody, podob­ne nie­kto­ré dru­hy rast­lín napr. Ana­cha­ris den­sa a živo­čí­chov, naj­mä ulit­ní­kov a las­túr­ni­kov zni­žu­jú obsah Ca a Mg vo vode. Do svo­jich ulít sú schop­né kumu­lo­vať veľ­ké množ­stvo váp­ni­ka, veď sú prak­tic­ky na jeho výsky­te závis­lé. Ampul­la­rie doká­žu vo väč­šom množ­stvo via­zať do svo­jich ulít pomer­ne znač­né množ­stvo váp­ni­ka. Naopak pri jeho nedos­tat­ku chrad­nú, mäk­ne im schrán­ka. Raše­li­na zni­žu­je takis­to v malej mie­re tvrdo­sť vody. Mie­ša­nie vody mäk­šej je samoz­rej­me mož­né na dosia­hnu­tie niž­šej tvrdo­s­ti, fun­gu­je to line­ár­ne. Pre reál­nu prax máme v prin­cí­pe nasle­du­jú­ce možnosti.


If we want to chan­ge the water hard­ness, with com­mon ine­xpen­si­ve means, we can only inc­re­a­se it. We can inc­re­a­se the con­tent of cal­cium and mag­ne­sium with cal­cium car­bo­na­te – CaCO3, mag­ne­sium car­bo­na­te – MgCO3, cal­cium sul­fa­te – CaSO4, mag­ne­sium sul­fa­te – MgSO4, cal­cium chlo­ri­de – CaCl2. Natu­ral­ly, for exam­ple, with limes­to­ne. Howe­ver, if we want to achie­ve a quick chan­ge, we must use a stron­ger con­cen­tra­ti­on. Final­ly, effec­ti­ve com­mer­cial pro­ducts are avai­lab­le that can quick­ly inc­re­a­se hard­ness. Howe­ver, a much more dif­fi­cult ques­ti­on ari­ses if we intend to dec­re­a­se the hard­ness. It is possib­le to use pre­ci­pi­ta­ti­on with oxa­lic acid, but the equ­ilib­rium of this pro­cess is small. Howe­ver, if we were able to fil­ter this water mecha­ni­cal­ly with a very fine fil­ter, we might achie­ve the desi­red result. Boiling water to redu­ce hard­ness is very une­co­no­mi­cal. The effect is mini­mal. Boiling only pre­ci­pi­ta­tes car­bo­na­te hard­ness, up to a maxi­mum of 2.7 °dKH. In addi­ti­on, boiling also des­tro­ys the litt­le life that is in the water, so I do not recom­mend boiling. Acti­va­ted char­co­al par­tial­ly redu­ces water hard­ness, simi­lar­ly some types of plants such as Ana­cha­ris den­sa and ani­mals, espe­cial­ly snails and crus­ta­ce­ans, redu­ce the con­tent of Ca and Mg in the water. They are able to accu­mu­la­te lar­ge amounts of cal­cium in the­ir shells, as they are prac­ti­cal­ly depen­dent on its occur­ren­ce. Ampul­la­ria are able to bind a rela­ti­ve­ly lar­ge amount of cal­cium into the­ir shells in lar­ger quan­ti­ties. Con­ver­se­ly, in its absen­ce, the­ir shells sof­ten. Peat also redu­ces water hard­ness to a small extent. Mixing sof­ter water is of cour­se possib­le to achie­ve lower hard­ness, and it works line­ar­ly. For prac­ti­cal pur­po­ses, we have the fol­lo­wing opti­ons in principle.


Wenn wir die Was­ser­här­te ändern wol­len, kön­nen wir mit gän­gi­gen kos­ten­güns­ti­gen Mit­teln nur deren Erhöhung erre­i­chen. Wir kön­nen den Gehalt an Cal­cium und Mag­ne­sium mit Cal­cium­car­bo­nat – CaCO3, Mag­ne­sium­car­bo­nat – MgCO3, Cal­cium­sul­fat – CaSO4, Mag­ne­sium­sul­fat – MgSO4, Cal­ciumch­lo­rid – CaCl2 erhöhen. Natür­lich, zum Beis­piel mit Kalks­te­in. Wenn wir jedoch eine schnel­le Ände­rung erre­i­chen wol­len, müs­sen wir eine stär­ke­re Kon­zen­tra­ti­on ver­wen­den. Sch­lie­ßlich ste­hen auch wirk­sa­me kom­mer­ziel­le Pro­duk­te zur Ver­fügung, die die Här­te schnell erhöhen kön­nen. Eine viel sch­wie­ri­ge­re Fra­ge stellt sich jedoch, wenn wir die Här­te ver­rin­gern möch­ten. Es ist mög­lich, eine Fäl­lung mit Oxal­sä­u­re zu ver­wen­den, aber das Gle­ich­ge­wicht die­ses Pro­zes­ses ist gering. Wenn wir jedoch die­ses Was­ser mecha­nisch mit einem sehr fei­nen Fil­ter fil­tern könn­ten, könn­ten wir das gewün­sch­te Ergeb­nis erzie­len. Das Abko­chen von Was­ser zur Ver­rin­ge­rung der Här­te ist sehr unef­fek­tiv. Der Effekt ist mini­mal. Beim Kochen fällt nur die Car­bo­nat­här­te aus, maxi­mal bis zu 2,7 °dKH. Darüber hinaus zers­tört das Kochen auch das weni­ge Leben im Was­ser, daher emp­feh­le ich es nicht. Aktiv­koh­le redu­ziert die Was­ser­här­te tei­lwe­i­se, eben­so eini­ge Arten von Pflan­zen wie Ana­cha­ris den­sa und Tie­re, ins­be­son­de­re Schnec­ken und Kreb­stie­re, redu­zie­ren den Gehalt an Ca und Mg im Was­ser. Sie sind in der Lage, gro­ße Men­gen Cal­cium in ihren Scha­len anzu­sam­meln, da sie prak­tisch von des­sen Auft­re­ten abhän­gig sind. Ampul­la­ria sind in der Lage, in größe­ren Men­gen eine rela­tiv gro­ße Men­ge Cal­cium in ihre Scha­len zu bin­den. Umge­ke­hrt erwe­i­chen sich ihre Scha­len bei des­sen Feh­len. Torf ver­rin­gert eben­falls die Was­ser­här­te in gerin­gem Maße. Das Mis­chen von wei­che­rem Was­ser ist natür­lich mög­lich, um eine gerin­ge­re Här­te zu erre­i­chen, und es funk­ti­oniert line­ar. Für prak­tis­che Zwec­ke haben wir im Prin­zip fol­gen­de Möglichkeiten.


Des­ti­lá­cia – v des­ti­lač­nej koló­ne sa voda zba­vu­je iónov. Pri des­ti­lá­cii dochá­dza ku pro­duk­cii znač­né­ho množ­stva odpa­do­vej vody. Pou­ží­va­nie veľ­kých obje­mov vody je nut­né, pre­to­že pri des­ti­lá­cii dochá­dza ku veľ­kých tep­lo­tám, kto­ré je nut­né ochla­dzo­vať. Des­ti­lač­ná koló­na je pomer­ne znač­ná inves­tí­cia, pou­ží­va­jú ju cho­va­te­lia, kto­rí majú väč­šie množ­stvo nádr­ží. Účin­nosť des­ti­lá­cie je veľ­mi vyso­ká. Je nut­né však pove­dať, že des­ti­lo­va­ná voda nie je veľ­mi vhod­ná pre akva­ris­tic­ké úče­ly. Je to voda totiž ste­ril­ná, a aj veľ­mi labil­ná. Pre­to je dob­ré túto vodu mie­šať. Pre ten­to dôvod je ide­ál­na reverz­ná osmó­za. Tech­nic­ká des­ti­lo­va­ná voda z obcho­du nie je veľ­mi vhod­ná pre akva­ris­tov. Pre­vádz­ka samot­nej des­ti­lač­nej koló­ny nepod­lie­ha nija­kým veľ­kých opot­re­be­niam, kaž­do­pád­ne pri nor­mál­nom pou­ží­va­ní nevy­ža­du­je vyso­ké násled­né investície.


Dis­til­la­ti­on – In the dis­til­la­ti­on column, water is strip­ped of ions. Dis­til­la­ti­on gene­ra­tes a sig­ni­fi­cant amount of was­te­wa­ter. The use of lar­ge volu­mes of water is neces­sa­ry becau­se dis­til­la­ti­on invol­ves high tem­pe­ra­tu­res that need to be cooled. The dis­til­la­ti­on column is a con­si­de­rab­le inves­tment, used by bre­e­ders who have a lar­ger num­ber of tanks. The effi­cien­cy of dis­til­la­ti­on is very high. Howe­ver, it must be said that dis­til­led water is not very suitab­le for aqu­arium pur­po­ses. It is ste­ri­le water and very labi­le. The­re­fo­re, it is good to mix this water. Rever­se osmo­sis is ide­al for this rea­son. Tech­ni­cal dis­til­led water from the sto­re is not very suitab­le for aqu­arists. The ope­ra­ti­on of the dis­til­la­ti­on column itself does not under­go any sig­ni­fi­cant wear and tear, and in any case, under nor­mal use, it does not requ­ire high sub­se­qu­ent investments.


Des­til­la­ti­on – In der Des­til­la­ti­ons­sä­u­le wird Was­ser von Ionen bef­re­it. Die Des­til­la­ti­on erze­ugt eine bet­rächt­li­che Men­ge an Abwas­ser. Die Ver­wen­dung gro­ßer Was­ser­men­gen ist erfor­der­lich, da bei der Des­til­la­ti­on hohe Tem­pe­ra­tu­ren auft­re­ten, die gekü­hlt wer­den müs­sen. Die Des­til­la­ti­ons­sä­u­le ist eine erheb­li­che Inves­ti­ti­on, die von Züch­tern ver­wen­det wird, die eine größe­re Anzahl von Tanks haben. Die Effi­zienz der Des­til­la­ti­on ist sehr hoch. Es muss jedoch gesagt wer­den, dass des­til­lier­tes Was­ser für Aqu­arien­zwec­ke nicht sehr gee­ig­net ist. Es han­delt sich um ste­ri­les Was­ser und ist sehr labil. Daher ist es gut, die­ses Was­ser zu mis­chen. Die Umkeh­ros­mo­se ist aus die­sem Grund ide­al. Tech­nis­ches des­til­lier­tes Was­ser aus dem Laden ist für Aqu­aria­ner nicht sehr gee­ig­net. Der Bet­rieb der Des­til­la­ti­ons­sä­u­le selbst unter­liegt kei­nem sig­ni­fi­kan­ten Versch­le­iß und erfor­dert unter nor­ma­len Bedin­gun­gen kei­ne hohen ansch­lie­ßen­den Investitionen.


Reverz­ná osmó­za – pro­ces, pri kto­rom sa využí­va semi­per­me­a­bi­li­ta – polo­prie­pust­nosť. Osmó­za je zná­my pro­ces, pri kto­rom nastá­va výme­na látok pôso­be­ním osmo­tic­ké­ho tla­ku za pred­po­kla­du polo­prie­pust­nos­ti medzi dvo­ma sústa­va­mi. Pre vysvet­le­nie – nemô­že dôjsť ku jed­no­du­chej difú­zii, ku zmie­ša­niu, pre­to­že medzi dvo­ma sys­té­ma­mi exis­tu­je hra­ni­ca, pre­káž­ka. Ale vply­vom toho, že táto hra­ni­ca je polo­prie­pust­ná, vďa­ka osmo­tic­ké­ho tla­ku doj­de ku toku látok. Toto využí­va aj reverz­ná osmó­za, no s tým roz­die­lom, že pri reverz­nej osmó­ze dochá­dza ku odčer­pa­niu iónov cel­kom, nedo­chá­dza ku vyrov­na­niu osmo­tic­ké­ho tla­ku na jed­nej aj dru­hej stra­ne. Tak­to zís­ka­ná je vhod­ná pre akva­ris­tu. Napo­kon ani jej účin­nosť nie je taká vyso­ká ako pri des­ti­lá­cii. Voda z reverz­ky zvy­čaj­ne dosa­hu­je zvy­čaj­ne 110 % pôvod­nej hod­no­ty vodi­vos­ti. Na trhu exis­tu­jú komerč­ne dostup­né osmo­tic­ké koló­ny, kto­ré je mož­né si zakú­piť. Obje­mo­vo neza­be­ra­jú tak veľa mies­ta ako des­ti­lač­né sústa­vy. Opro­ti des­ti­lač­nej sústa­ve majú jed­nu veľ­kú nevý­ho­du v trvan­li­vos­ti – mem­brá­ny a fil­trač­né média osmo­tic­kej koló­ny je nut­né časom meniť, pre­to­že inak reverz­ka pre­sta­ne plniť svo­ju funkciu.


Rever­se osmo­sis – a pro­cess that uti­li­zes semi­per­me­a­bi­li­ty. Osmo­sis is a kno­wn pro­cess in which the exchan­ge of sub­stan­ces occurs due to osmo­tic pre­ssu­re assu­ming semi­per­me­a­bi­li­ty bet­we­en two sys­tems. For cla­ri­fi­ca­ti­on – sim­ple dif­fu­si­on, mixing can­not occur becau­se the­re is a boun­da­ry, an obstac­le bet­we­en two sys­tems. But due to the fact that this boun­da­ry is semi­per­me­ab­le, thanks to osmo­tic pre­ssu­re, the flow of sub­stan­ces occurs. Rever­se osmo­sis also uti­li­zes this, but with the dif­fe­ren­ce that in rever­se osmo­sis, ions are com­ple­te­ly remo­ved, the­re is no equ­ali­za­ti­on of osmo­tic pre­ssu­re on both sides. The water obtai­ned in this way is suitab­le for aqu­arists. Final­ly, its effi­cien­cy is not as high as in dis­til­la­ti­on. Water from a rever­se osmo­sis sys­tem typi­cal­ly rea­ches 110% of the ori­gi­nal con­duc­ti­vi­ty value. The­re are com­mer­cial­ly avai­lab­le rever­se osmo­sis units on the mar­ket that can be pur­cha­sed. They do not take up as much spa­ce as dis­til­la­ti­on sys­tems. Howe­ver, com­pa­red to dis­til­la­ti­on sys­tems, they have one major disad­van­ta­ge in terms of dura­bi­li­ty – mem­bra­nes and fil­tra­ti­on media of the rever­se osmo­sis unit need to be repla­ced over time becau­se other­wi­se, the rever­se osmo­sis sys­tem will fail to func­ti­on properly.


Rever­sos­mo­se – ein Pro­zess, der die Semi­per­me­a­bi­li­tät nutzt. Osmo­se ist ein bekann­ter Pro­zess, bei dem der Aus­tausch von Sub­stan­zen aufg­rund des osmo­tis­chen Drucks unter der Annah­me von Semi­per­me­a­bi­li­tät zwis­chen zwei Sys­te­men erfolgt. Zur Klars­tel­lung – ein­fa­che Dif­fu­si­on, Mis­chung kann nicht auft­re­ten, weil es eine Gren­ze, ein Hin­der­nis zwis­chen zwei Sys­te­men gibt. Aber aufg­rund der Tat­sa­che, dass die­se Gren­ze semi­per­me­a­bel ist, kommt es dank des osmo­tis­chen Drucks zum Fluss von Sub­stan­zen. Die Umkeh­ros­mo­se nutzt dies eben­falls, jedoch mit dem Unters­chied, dass bei der Umkeh­ros­mo­se Ionen volls­tän­dig ent­fernt wer­den, es kei­ne Ausg­le­i­chung des osmo­tis­chen Drucks auf bei­den Sei­ten gibt. Das auf die­se Wei­se gewon­ne­ne Was­ser ist für Aqu­aria­ner gee­ig­net. Sch­lie­ßlich ist sei­ne Effi­zienz nicht so hoch wie bei der Des­til­la­ti­on. Was­ser aus einer Umkeh­ros­mo­se­an­la­ge erre­icht in der Regel 110% des urs­prün­gli­chen Leit­fä­hig­ke­it­swerts. Auf dem Mar­kt sind kom­mer­ziell erhält­li­che Umkeh­ros­mo­se­an­la­gen erhält­lich, die gekauft wer­den kön­nen. Sie neh­men nicht so viel Platz ein wie Des­til­la­ti­ons­sys­te­me. Im Verg­le­ich zu Des­til­la­ti­ons­sys­te­men haben sie jedoch einen wesen­tli­chen Nach­te­il in Bez­ug auf die Halt­bar­ke­it – Mem­bra­nen und Fil­ter­me­dien der Umkeh­ros­mo­se­an­la­ge müs­sen im Lau­fe der Zeit aus­ge­tauscht wer­den, da sonst die Umkeh­ros­mo­se­an­la­ge nicht ord­nungs­ge­mäß funktioniert.


Ion­to­me­ni­čom (Ione­xom) – elek­tro­ly­tic­ká úpra­va cez katexanex, z kto­rých jeden je zápor­ne nabi­tý a pri­ťa­hu­je kati­ó­ny a dru­hý klad­ne a pri­ťa­hu­je ani­ó­ny. Voda pre­chá­dza tými­to dvo­ma hlav­ný­mi čas­ťa­mi a ióny sa na jed­not­li­vých čas­tiach via­žu. Tým sa dosiah­ne demi­ne­ra­li­zá­cia od iónov. Ionex by sa dal aj naj­ľah­šie zosta­viť aj ama­tér­sky. Prob­lé­mom je, že katex a anex má svo­ju kapa­ci­tu. Časom sa musí rege­ne­ro­vať, aby si zacho­val svo­je fyzi­kál­ne vlast­nos­ti a celý sys­tém bol účin­ný. Rege­ne­rá­cia sa vyko­ná­va pôso­be­ním rôz­nych špe­ci­fic­kých látok, v nie­kto­rých prí­pa­doch kuchyn­skou soľou. Ako ionex (menič) na váp­nik sa pou­ží­va napr. per­mu­tit, wofa­tit, cabu­nit. Selek­tív­ne ión­to­me­ni­če sú urče­né pre eli­mi­ná­ciu nie­kto­rých prv­kov – zlo­žiek vody. Na dusík – N je vhod­ný mon­mo­ril­lo­nitcli­nop­ti­olit.


Ion exchan­ge (Ionex) – elect­ro­ly­tic tre­at­ment via a cat­hex and anex, one of which is nega­ti­ve­ly char­ged and att­racts cati­ons, and the other is posi­ti­ve­ly char­ged and att­racts ani­ons. Water pas­ses through the­se two main parts, and ions are bound to the indi­vi­du­al parts. This achie­ves demi­ne­ra­li­za­ti­on from ions. Ionex could also be easi­ly assem­bled ama­te­urish­ly. The prob­lem is that cat­hex and anex have the­ir capa­ci­ty. Over time, it must be rege­ne­ra­ted to main­tain its phy­si­cal pro­per­ties and the enti­re sys­tem to be effec­ti­ve. Rege­ne­ra­ti­on is car­ried out by the acti­on of vari­ous spe­ci­fic sub­stan­ces, in some cases, kit­chen salt. As an ion exchan­ge (chan­ger) for cal­cium, per­mu­tit, wofa­tit, and cabu­nit are used, for exam­ple. Selec­ti­ve ion exchan­gers are desig­ned to eli­mi­na­te cer­tain ele­ments – com­po­nents in water. For nit­ro­gen – N, mon­mo­ril­lo­ni­te, and cli­nop­ti­oli­te are suitable.


Ion­tausch (Ionex) – elek­tro­ly­tis­che Behand­lung über eine Kat­hex und Anex, von denen eine nega­tiv gela­den ist und Kati­onen anzieht, und die ande­re posi­tiv gela­den ist und Ani­onen anzieht. Was­ser durch­lä­uft die­se bei­den Haupt­te­i­le, und Ionen sind an die ein­zel­nen Tei­le gebun­den. Dadurch wird eine Ent­mi­ne­ra­li­sie­rung von Ionen erre­icht. Ionex könn­te auch leicht ama­te­ur­haft zusam­men­ge­baut wer­den. Das Prob­lem ist, dass Kat­hex und Anex ihre Kapa­zi­tät haben. Im Lau­fe der Zeit muss es rege­ne­riert wer­den, um sei­ne phy­si­ka­lis­chen Eigen­schaf­ten zu erhal­ten und das gesam­te Sys­tem effek­tiv zu machen. Die Rege­ne­ra­ti­on erfolgt durch die Wir­kung vers­chie­de­ner spe­zi­fis­cher Sub­stan­zen, in eini­gen Fäl­len durch Spe­i­se­salz. Als Ione­naus­taus­cher (Wechs­ler) für Cal­cium wer­den beis­piel­swe­i­se Per­mu­tit, Wofa­tit und Cabu­nit ver­wen­det. Selek­ti­ve Ione­naus­taus­cher sind darauf aus­ge­legt, bes­timm­te Ele­men­te – Kom­po­nen­ten im Was­ser zu eli­mi­nie­ren. Für Sticks­toff – N sind Mon­mo­ril­lo­nit und Cli­nop­ti­olit geeignet.


Zní­že­nie vodi­vos­ti sa dosa­hu­je rov­na­ký­mi metó­da­mi ako je opí­sa­né pri tvrdo­s­ti vody. Zvý­še­nie vodi­vos­ti det­to. Zdro­jo­vá voda, kto­rú máme k dis­po­zí­cii dis­po­nu­je zväč­ša mier­ne zása­di­tým pH pit­nej vodo­vod­nej vody je oby­čaj­ne oko­lo 7.5. Pre mno­ho rýb je vhod­né zvý­šiť kys­losť na hod­no­ty oko­lo 6.5. Máme nie­koľ­ko mož­nos­tí – buď zme­niť pH čis­to che­mic­ky, ale­bo pri­ro­dze­nej­šie. Zme­na pH je efek­tív­nej­šia vte­dy, keď voda obsa­hu­je menej roz­pus­te­ných látok. Ak obsa­hu­je množ­stvo solí, zme­na pH bude o nie­čo men­šia a prí­pad­né kolí­sa­nie tej­to hod­no­ty bude men­šie. Pôso­be­nie NaCl – soľ na pH vody je pre akva­ris­tu nehod­no­ti­teľ­né, pre­to­že ide o soľ sil­nej zása­dy – NaOH a sil­nej kyse­li­ny – HCl, čiže pro­duk­tov zhru­ba rov­na­kej sily, čiže pH neovp­lyv­ňu­je. Prak­tic­ky na pH pôso­bí, ale len vďa­ka tomu, že aj akvá­ri­ová voda je vod­ný roz­tok obsa­hu­jú­ci rôz­ne lát­ky, s kto­rý­mi NaCl rea­gu­je. Toto pôso­be­nie je však malé a ťaž­ko predpokladateľné.


Reduc­ti­on of con­duc­ti­vi­ty is achie­ved by the same met­hods as desc­ri­bed for water hard­ness. Simi­lar­ly, inc­re­a­sing con­duc­ti­vi­ty. The sour­ce water avai­lab­le to us typi­cal­ly has a slight­ly alka­li­ne pH, with drin­king tap water usu­al­ly around 7.5. For many fish, it is suitab­le to inc­re­a­se the aci­di­ty to valu­es around 6.5. We have seve­ral opti­ons – eit­her chan­ge the pH pure­ly che­mi­cal­ly or more natu­ral­ly. pH chan­ge is more effec­ti­ve when water con­tains fewer dis­sol­ved sub­stan­ces. If it con­tains a lot of salts, the pH chan­ge will be some­what smal­ler, and any fluc­tu­ati­ons in this value will be smal­ler. The effect of NaCl – salt on the pH of water is neg­li­gib­le for the aqu­arist becau­se it is a salt of a strong base – NaOH and a strong acid – HCl, so it does not affect the pH. Prac­ti­cal­ly, NaCl affects pH only becau­se aqu­arium water is a solu­ti­on con­tai­ning vari­ous sub­stan­ces with which NaCl reacts. Howe­ver, this effect is small and dif­fi­cult to predict.


Die Reduk­ti­on der Leit­fä­hig­ke­it wird durch die gle­i­chen Met­ho­den erre­icht wie für die Was­ser­här­te besch­rie­ben. Eben­so die Erhöhung der Leit­fä­hig­ke­it. Das Aus­gang­swas­ser, das uns zur Ver­fügung steht, hat in der Regel einen leicht alka­lis­chen pH-​Wert, wobei das Trink­was­ser aus dem Was­ser­hahn in der Regel bei etwa 7,5 liegt. Für vie­le Fis­che ist es gee­ig­net, die Säu­re auf Wer­te um 6,5 zu erhöhen. Wir haben meh­re­re Mög­lich­ke­i­ten – ent­we­der den pH-​Wert rein che­misch zu ändern oder natür­li­cher. Die pH-​Wert-​Änderung ist wirk­sa­mer, wenn das Was­ser weni­ger gelös­te Sub­stan­zen ent­hält. Wenn es vie­le Sal­ze ent­hält, wird die pH-​Wert-​Änderung etwas kle­i­ner sein, und Sch­wan­kun­gen in die­sem Wert wer­den kle­i­ner sein. Die Wir­kung von NaCl – Salz auf den pH-​Wert des Was­sers ist für den Aqu­aria­ner ver­nach­läs­sig­bar, da es sich um ein Salz einer star­ken Base – NaOH und einer star­ken Säu­re – HCl han­delt und den pH-​Wert nicht bee­in­flusst. Prak­tisch bee­in­flusst NaCl den pH-​Wert nur, weil das Aqu­arien­was­ser eine Lösung ist, die vers­chie­de­ne Sub­stan­zen ent­hält, mit denen NaCl rea­giert. Die­ser Effekt ist jedoch gering und sch­wer vorhersehbar.


Pre zní­že­nie pH je vhod­né pou­ži­tie sla­bej kyse­li­ny 3‑hydrogen fos­fo­reč­nej – H3PO4. H3PO4 je sla­bá kyse­li­na. O tom aké množ­stvo je nut­né sa pre­sved­čiť expe­ri­men­tom. Zme­na pH akým­koľ­vek pôso­be­ním totiž závi­sí aj obsa­hu solí, čias­toč­ne od tep­lo­ty, tla­ku. Len veľ­mi zhru­ba mož­no pove­dať, že ak chce­me zní­žiť pH v 100 lit­ro­vej nádr­ži, apli­ku­je­me H3PO4 rádo­vo v mili­lit­roch. Pou­ži­tie iných kyse­lín neod­po­rú­čam, kaž­do­pád­ne by sa malo jed­nať aj z hľa­dis­ka vašej bez­peč­nos­ti o sla­bé kyse­li­ny jed­no­du­ché­ho zlo­že­nia. H3PO4 je vše­obec­ne pou­ží­va­ná lát­ka na zní­že­nie tvrdo­s­ti. Ak pou­ži­je­me H3PO4 dochá­dza pri tom aj ku tým­to reak­ciám (pri uve­de­ných reak­ciách je mož­né váp­nik Ca nahra­diť za hor­čík Mg): 2H3PO4 + 3Ca(HCO3)2 = Ca3(PO4)2 + 6H2CO3 – kyse­li­na rea­gu­je s dihyd­ro­ge­nuh­li­či­ta­nom vápe­na­tým za vzni­ku roz­pust­né­ho difos­fo­reč­na­nu vápe­na­té­ho a sla­bej kyse­li­ny uhli­či­tej. H2CO3 je nesta­bil­ná a môže sa roz­pad­núť na vodu a oxid uhli­či­tý. Vznik­nu­tý fos­fo­reč­nan môže byť hno­ji­vom pre ryby, sini­ce, ale­bo ria­sy, prí­pad­ne zdro­jom fos­fo­ru pre ryby. 2H3PO4 + Ca(HCO3)2 = Ca(H2PO4)2 + 6H2CO3 - vzni­ká roz­pust­ný dihyd­ro­gen­fos­fo­reč­nan vápe­na­tý. H3PO4 + Ca(HCO3)2 = CaH­PO4 + 2H2CO3 – vzni­ká neroz­pust­ný hyd­ro­gen­fos­fo­reč­nan vápe­na­tý. Ak by sme pred­sa len pou­ži­li sil­né kyse­li­ny: 2HCl + Ca(HCO3)2 = CaCl2 + 2H2CO3 – reak­ci­ou kyse­li­ny chlo­ro­vo­dí­ko­vej (soľ­nej) vzni­ká chlo­rid vápe­na­tý. H2SO4 + Ca(HCO3)2 = CaSO4 + 2H2CO3 - reak­ci­ou kyse­li­ny síro­vej vzni­ká síran vápe­na­tý. Ak zdro­jo­vá voda obsa­hu­je vápe­nec, pre­ja­ví sa puf­rač­ná kapa­ci­ta vody – uhli­či­tan vápe­na­tý CaCO3 totiž rea­gu­je so vznik­nu­tou kyse­li­nou uhli­či­tou za vzni­ku hyd­ro­ge­nuh­li­či­ta­nu, čím sa dostá­va­me do kolo­be­hu – vlast­ne do cyk­lu kyse­li­ny uhli­či­tej. Tým­to spô­so­bom sú naše mož­nos­ti ovplyv­niť pH limi­to­va­né. Na urči­tý čas sa pH aj v takom­to prí­pa­de zní­ži, ale nie nadl­ho, to závi­sí naj­mä na kon­cen­trá­cii hyd­ro­ge­nuh­li­či­ta­nov (od UT) a množ­stva pou­ži­tej kyse­li­ny – je len samoz­rej­mé že puf­rač­ná schop­nosť má svo­je limi­ty. V prí­pa­de vyso­kej tvrdo­s­ti vody je účin­nej­šie pou­žiť neus­tá­le pôso­be­nie CO2.


For redu­cing pH, it is suitab­le to use weak phosp­ho­ric acid (H₃PO₄). H₃PO₄ is a weak acid. The amount neces­sa­ry should be deter­mi­ned by expe­ri­men­ta­ti­on. The pH chan­ge by any means also depends on the salt con­tent, par­tial­ly on tem­pe­ra­tu­re, and pre­ssu­re. It can be rough­ly esti­ma­ted that to lower the pH in a 100-​liter tank, H₃PO₄ should be app­lied in mil­li­li­ters. I do not recom­mend using other acids; howe­ver, for your safe­ty, it should also be a weak acid of sim­ple com­po­si­ti­on. H₃PO₄ is com­mon­ly used to redu­ce hard­ness. When using H₃PO₄, the fol­lo­wing reac­ti­ons occur (in the lis­ted reac­ti­ons, cal­cium Ca can be repla­ced with mag­ne­sium Mg):

2H₃PO₄ + 3Ca(HCO₃)₂ = Ca₃(PO₄)₂ + 6H₂CO₃ – acid reacts with cal­cium bicar­bo­na­te to form solub­le cal­cium phosp­ha­te and weak car­bo­nic acid. H₂CO₃ is uns­tab­le and can bre­ak down into water and car­bon dioxi­de. The resul­ting phosp­ha­te can be fer­ti­li­zer for fish, algae, or a sour­ce of phosp­ho­rus for fish.

2H₃PO₄ + Ca(HCO₃)₂ = Ca(H₂PO₄)₂ + 6H₂CO₃ – solub­le dihyd­ro­gen phosp­ha­te cal­cium is formed.

H₃PO₄ + Ca(HCO₃)₂ = CaH­PO₄ + 2H₂CO₃ – inso­lub­le cal­cium hyd­ro­gen phosp­ha­te is formed.

If we were to use strong acids:

2HCl + Ca(HCO₃)₂ = CaC­l₂ + 2H₂CO₃ – reac­ti­on of hyd­ro­ch­lo­ric acid (muria­tic acid) forms cal­cium chloride.

H₂SO₄ + Ca(HCO₃)₂ = CaSO₄ + 2H₂CO₃ – reac­ti­on of sul­fu­ric acid forms cal­cium sulfate.

If the sour­ce water con­tains limes­to­ne, the wate­r’s buf­fe­ring capa­ci­ty will be evi­dent – cal­cium car­bo­na­te CaCO₃ reacts with the resul­ting car­bo­nic acid to form bicar­bo­na­te, ente­ring the car­bo­nic acid cyc­le. In this way, our opti­ons to influ­en­ce pH are limi­ted. pH will dec­re­a­se for a cer­tain time, but not for long; this main­ly depends on the con­cen­tra­ti­on of bicar­bo­na­tes (from CO₂) and the amount of acid used – it’s obvi­ous that the buf­fe­ring capa­ci­ty has its limits. In the case of high water hard­ness, con­ti­nu­ous CO₂ tre­at­ment is more effective.


Für die Redu­zie­rung des pH-​Werts ist die Ver­wen­dung von sch­wa­cher Phosp­hor­sä­u­re (H₃PO₄) gee­ig­net. H₃PO₄ ist eine sch­wa­che Säu­re. Die erfor­der­li­che Men­ge soll­te durch Expe­ri­men­te ermit­telt wer­den. Die pH-​Änderung durch jedes Mit­tel hängt auch vom Salz­ge­halt, tei­lwe­i­se von der Tem­pe­ra­tur und dem Druck ab. Es kann grob ges­chätzt wer­den, dass zur Sen­kung des pH-​Werts in einem 100-​Liter-​Tank H₃PO₄ in Mil­li­li­tern ver­wen­det wer­den soll­te. Ich emp­feh­le nicht, ande­re Säu­ren zu ver­wen­den; jedoch soll­te es aus Sicher­he­itsg­rün­den auch eine sch­wa­che Säu­re mit ein­fa­cher Zusam­men­set­zung sein. H₃PO₄ wird häu­fig zur Redu­zie­rung der Här­te ver­wen­det. Bei der Ver­wen­dung von H₃PO₄ tre­ten die fol­gen­den Reak­ti­onen auf (in den auf­ge­fü­hr­ten Reak­ti­onen kann Cal­cium Ca durch Mag­ne­sium Mg ersetzt werden):

2H₃PO₄ + 3Ca(HCO₃)₂ = Ca₃(PO₄)₂ + 6H₂CO₃ – die Säu­re rea­giert mit Cal­cium­bi­car­bo­nat und bil­det lös­li­ches Cal­ciump­hosp­hat und sch­wa­che Koh­len­sä­u­re. H₂CO₃ ist ins­ta­bil und kann in Was­ser und Koh­len­di­oxid zer­fal­len. Das ents­te­hen­de Phosp­hat kann Dün­ger für Fis­che, Algen oder eine Phosp­ho­rqu­el­le für Fis­che sein.

2H₃PO₄ + Ca(HCO₃)₂ = Ca(H₂PO₄)₂ + 6H₂CO₃ – lös­li­ches Dihyd­ro­genp­hosp­hat­cal­cium entsteht.

H₃PO₄ + Ca(HCO₃)₂ = CaH­PO₄ + 2H₂CO₃ – unlös­li­ches Cal­cium­di­hyd­ro­genp­hosp­hat entsteht.

Wenn wir star­ke Säu­ren ver­wen­den würden:

2HCl + Ca(HCO₃)₂ = CaC­l₂ + 2H₂CO₃ – Reak­ti­on von Salz­sä­u­re (Chlor­was­sers­toff­sä­u­re) bil­det Calciumchlorid.

H₂SO₄ + Ca(HCO₃)₂ = CaSO₄ + 2H₂CO₃ – Reak­ti­on von Sch­we­fel­sä­u­re bil­det Calciumsulfat.

Wenn das Aus­gang­swas­ser Kalks­te­in ent­hält, wird die Puf­fer­ka­pa­zi­tät des Was­sers offen­sicht­lich sein – Cal­cium­car­bo­nat CaCO₃ rea­giert mit der ents­te­hen­den Koh­len­sä­u­re zu Bicar­bo­nat und gelangt in den Koh­len­sä­u­re­zyk­lus. Auf die­se Wei­se sind unse­re Mög­lich­ke­i­ten zur Bee­in­flus­sung des pH-​Werts beg­renzt. Der pH-​Wert wird für eine bes­timm­te Zeit sin­ken, aber nicht lan­ge; dies hängt haupt­säch­lich von der Kon­zen­tra­ti­on der Bicar­bo­na­te (aus CO₂) und der ver­wen­de­ten Säu­re­men­ge ab – es ist offen­sicht­lich, dass die Puf­fer­ka­pa­zi­tät ihre Gren­zen hat. Bei hoher Was­ser­här­te ist eine kon­ti­nu­ier­li­che CO₂-​Behandlung wirksamer.


Pri­ro­dze­ne sa dá zní­žiť pH takis­to. Vhod­né sú napr. jel­šo­vé šiš­ky, zahní­va­jú­ce dre­vo, raše­li­na, výluh z raše­li­ny atď. Všet­ko závi­sí od pozna­nia dru­ho­vých náro­kov jed­not­li­vých rýb a rast­lín. Nie­kto­ré ryby nezná­ša­jú raše­li­no­vý extrakt. Raše­li­no­vý výluh sa čas­to pou­ží­va pre výte­ry napr. tet­ro­vi­tých rýb. Raše­li­na zni­žu­je pH. Zahní­va­jú­ce dre­vo má svo­je úska­lia. Vše­obec­ne sa však dá pove­dať naj­mä pre začí­na­jú­cich akva­ris­tov, že pou­ži­tie rôz­nych mate­riá­lov v akvá­riu nie je také nebez­peč­né ako si väč­ši­na z nich mys­lí. Naopak, svo­jou dlho­do­bej­šou a pozvoľ­nou čin­nos­ťou je ich úči­nok na zme­nu pH ove­ľa pri­ja­teľ­nej­ší ako pri pou­ži­tí čis­tej ché­mie. Navy­še cha­rak­ter kyse­lín, kto­ré sa lúhu­jú z tých­to mate­riá­lov čas­to bla­ho­dar­ne vplý­va­jú aj na zdra­vie rýb, na rast rast­lín. Humí­no­vé kyse­li­ny, orga­nic­ké kom­ple­xy, che­lá­ty a ostat­né orga­nic­ké lát­ky, kto­ré sú čas­to pri­ro­dze­nou súčas­ťou našich rýb a rast­lín aj v ich domovine.


Natu­ral­ly, pH can also be lowe­red. Suitab­le opti­ons inc­lu­de alder cones, deca­y­ing wood, peat, peat extract, etc. Howe­ver, eve­ryt­hing depends on unders­tan­ding the spe­ci­fic requ­ire­ments of indi­vi­du­al fish and plants. Some fish do not tole­ra­te peat extract. Peat extract is often used for dips, for exam­ple, for tet­ra fish. Peat redu­ces pH. Deca­y­ing wood has its dra­wbacks. Howe­ver, it can gene­ral­ly be said, espe­cial­ly for begin­ning aqu­arists, that using vari­ous mate­rials in the aqu­arium is not as dan­ge­rous as most peop­le think. On the con­tra­ry, the­ir long-​term and gra­du­al acti­vi­ty makes the­ir effect on pH chan­ge much more accep­tab­le than using pure che­mi­cals. More­over, the natu­re of the acids lea­ched from the­se mate­rials often has a bene­fi­cial effect on fish health and plant gro­wth. Humic acids, orga­nic com­ple­xes, che­la­tes, and other orga­nic sub­stan­ces that are often a natu­ral part of our fish and plants, even in the­ir nati­ve habi­tats, play a role in this process.


Natür­lich kann der pH-​Wert auch auf natür­li­che Wei­se gesenkt wer­den. Gee­ig­ne­te Opti­onen sind zum Beis­piel Erlen­zap­fen, ver­rot­ten­des Holz, Torf, Tor­faus­zug usw. Alles hängt jedoch von der Kenn­tnis der spe­zi­fis­chen Anfor­de­run­gen ein­zel­ner Fis­che und Pflan­zen ab. Eini­ge Fis­che ver­tra­gen kei­nen Tor­faus­zug. Tor­faus­zug wird oft für Bäder ver­wen­det, zum Beis­piel für Tetra-​Fische. Torf senkt den pH-​Wert. Ver­rot­ten­des Holz hat sei­ne Nach­te­i­le. Im All­ge­me­i­nen kann jedoch beson­ders für Anfänger-​Aquarianer gesagt wer­den, dass die Ver­wen­dung vers­chie­de­ner Mate­ria­lien im Aqu­arium nicht so gefähr­lich ist, wie die meis­ten den­ken. Im Gegen­te­il, durch ihre langf­ris­ti­ge und sch­ritt­we­i­se Akti­vi­tät ist ihr Ein­fluss auf die pH-​Änderung viel akzep­tab­ler als bei Ver­wen­dung rei­ner Che­mi­ka­lien. Außer­dem haben die Säu­ren, die aus die­sen Mate­ria­lien aus­ge­laugt wer­den, oft einen posi­ti­ven Ein­fluss auf die Gesund­he­it der Fis­che und das Wachs­tum der Pflan­zen. Humin­sä­u­ren, orga­nis­che Kom­ple­xe, Che­la­te und ande­re orga­nis­che Sub­stan­zen, die oft natür­li­cher Bes­tand­te­il unse­rer Fis­che und Pflan­zen sind, auch in ihrer Heimat.


Na zvý­še­nie pH sa pou­ží­va sóda bikar­bó­na – NaHCO3. Čo sa však týka zvy­šo­va­nie pH, pou­ží­va sa v ove­ľa men­šej mie­re tým­to čis­to che­mic­kým spô­so­bom. Pri­ro­dze­ným spô­so­bom sa dá zvý­šiť pH naj­lep­šie sub­strá­tom. Uhli­či­ta­ny obsia­hnu­té vo vápen­ci, tra­ver­tí­ne posú­va­jú hod­no­ty pH až na úro­veň nad 8 úpl­ne bež­ne. Veľ­mi jed­no­du­chá úpra­va vody je pou­ži­tie soli. Ak chce­me dosiah­nuť stá­lu hla­di­nu soli, neza­bú­daj­te soľ pri výme­ne a dolie­va­ní vody dopĺňať. Soľ sa pou­ží­va pre nie­kto­ré dru­hy rýb, pre­dov­šet­kým pre bra­kic­ké dru­hy. Bra­kic­ké dru­hy žijú v prí­ro­de na prie­ni­ku slad­kej vody a mor­skej, napr. v ústiach veľ­kých riek do mora. Aj pre nie­kto­ré živo­rod­ky sa odpo­rú­ča vodu soliť. Živo­rod­ky žijú v Juž­nej a Sever­nej Ame­ri­ke vo vodách stred­ne tvr­dých. Vhod­ná dáv­ka pre gup­ky je 2 – 3 poliev­ko­vé lyži­ce soli na 40 lit­rov vody. Pre black­mol­ly – typic­ký bra­kic­ký druh ešte o nie­čo viac – 5 lyžíc na 40 lit­rov vody. Soľ môže­me pou­žiť kuchyn­skú aj mor­skú, kto­rú dostať v potra­vi­nách. Ak začí­na­me s apli­ká­ci­ou soli, buď­me zo začiat­ku opatr­ný, postu­puj­me obo­zret­ne, na soľ ryby zvy­kaj­me rad­šej postup­ne, pre­to­že osmo­tic­ký tlak je zrad­ný. Pri náh­lej zme­ne vodi­vos­ti spô­so­be­nej náh­lym prí­ras­tkom NaCl dôj­de k nega­tív­ne­mu stre­su – naj­mä povrch – koža rýb je náchyl­ná na poško­de­nie. Táto vlast­nosť sa využí­va pri lieč­be.


To inc­re­a­se pH, baking soda – NaHCO3 is used. Howe­ver, when it comes to rai­sing pH, this pure­ly che­mi­cal met­hod is used to a much les­ser extent. Natu­ral­ly, pH can be best inc­re­a­sed by using a sub­stra­te. Car­bo­na­tes con­tai­ned in limes­to­ne, tra­ver­ti­ne com­mon­ly shift pH valu­es​to levels abo­ve 8. A very sim­ple water adjus­tment is the use of salt. If we want to achie­ve a cons­tant level of salt, do not for­get to add salt during water chan­ges and top-​ups. Salt is used for some types of fish, espe­cial­ly for brac­kish spe­cies. Brac­kish spe­cies live in natu­re at the inter­sec­ti­on of fresh and salt­wa­ter, for exam­ple, at the mouths of lar­ge rivers into the sea. Salt is also recom­men­ded for some live­be­a­rers. Live­be­a­rers live in waters of mode­ra­te hard­ness in South and North Ame­ri­ca. The app­rop­ria­te dosa­ge for gup­pies is 2 – 3 tab­les­po­ons of salt per 40 liters of water. For black mol­lies – a typi­cal brac­kish spe­cies – even a litt­le more, 5 tab­les­po­ons per 40 liters of water. We can use both tab­le and sea salt, which can be obtai­ned in sto­res. When star­ting with salt app­li­ca­ti­on, let’s be cau­ti­ous at first, pro­ce­ed care­ful­ly, and let the fish gra­du­al­ly get used to the salt, as osmo­tic pre­ssu­re is tric­ky. A sud­den chan­ge in con­duc­ti­vi­ty cau­sed by a sud­den inc­re­a­se in NaCl will lead to nega­ti­ve stress – espe­cial­ly the sur­fa­ce – the fis­h’s skin is sus­cep­tib­le to dama­ge. This pro­per­ty is uti­li­zed in treatment.


Um den pH-​Wert zu erhöhen, wird Back­pul­ver – NaHCO3 ver­wen­det. Wenn es jedoch darum geht, den pH-​Wert zu erhöhen, wird die­se rein che­mis­che Met­ho­de in viel gerin­ge­rem Maße ver­wen­det. Natür­lich kann der pH-​Wert am bes­ten durch die Ver­wen­dung eines Sub­strats erhöht wer­den. Car­bo­na­te, die in Kalks­te­in und Tra­ver­tin ent­hal­ten sind, vers­chie­ben die pH-​Werte häu­fig auf Wer­te über 8. Eine sehr ein­fa­che Mög­lich­ke­it der Was­se­ran­pas­sung ist die Ver­wen­dung von Salz. Wenn wir einen kons­tan­ten Salz­ge­halt erre­i­chen wol­len, soll­ten wir nicht ver­ges­sen, beim Was­ser­wech­sel und Nach­fül­len Salz hin­zu­zu­fügen. Salz wird für eini­ge Fis­char­ten ver­wen­det, ins­be­son­de­re für Brack­was­se­rar­ten. Brack­was­se­rar­ten leben in der Natur an der Schnitts­tel­le von Süß- und Sal­zwas­ser, zum Beis­piel an den Mün­dun­gen gro­ßer Flüs­se ins Meer. Auch für eini­ge lebend­ge­bä­ren­de Arten wird Salz emp­foh­len. Lebend­ge­bä­ren­de Arten leben in Gewäs­sern mitt­le­rer Här­te in Süd- und Nor­da­me­ri­ka. Die rich­ti­ge Dosie­rung für Gup­pys bet­rägt 2 – 3 Ess­löf­fel Salz pro 40 Liter Was­ser. Für sch­war­ze Mol­lys – eine typis­che Brack­was­se­rart – etwas mehr, 5 Ess­löf­fel pro 40 Liter Was­ser. Wir kön­nen sowohl Tafel- als auch Meer­salz ver­wen­den, das in Ges­chäf­ten erhält­lich ist. Wenn wir mit der Anwen­dung von Salz begin­nen, soll­ten wir zuerst vor­sich­tig vor­ge­hen, vor­sich­tig vor­ge­hen und die Fis­che all­mäh­lich an das Salz gewöh­nen, da der osmo­tis­che Druck tüc­kisch ist. Eine plötz­li­che Ände­rung der Leit­fä­hig­ke­it durch einen plötz­li­chen Ans­tieg von NaCl führt zu nega­ti­vem Stress – ins­be­son­de­re die Oberf­lä­che – die Haut der Fis­che ist anfäl­lig für Schä­den. Die­se Eigen­schaft wird bei der Behand­lung genutzt.


Soľ sa odpo­rú­ča afric­kých jazer­ným cich­li­dám. Obsa­hu­jú pomer­ne vyso­ké kon­cen­trá­cie sodí­ka – Na. V lite­ra­tú­re sa uvá­dza až 0.5 kg na 100 lit­rov vody, ja odpo­rú­čam jed­nu poliev­ko­vú lyži­cu na 40 lit­rov vody. Soľ pôso­bí zrej­me ako tran­s­por­tér meta­bo­lic­kých pro­ce­sov a kata­ly­zá­tor. NaCl naj­skôr diso­ciu­je na kati­ón sodí­ka a ani­ón chló­ru. Chlór pôso­bí ako dez­ifen­kcia a sodík sa podie­ľa na bio­lo­gic­kých reak­ciách. Orga­nic­ké far­bi­vá, lie­či­vá môže­me úspeš­ne odstrá­niť aktív­nym uhlím, čias­toč­ne raše­li­nou. Aktív­ne uhlie vôbec má širo­ké pole uplat­ne­nia. Je pomer­ne účin­nou pre­ven­ci­ou voči náka­ze, pre­to­že adsor­bu­je na seba množ­stvo škod­li­vín. Fun­gu­je ako fil­ter. Má takú štruk­tú­ru, že oplý­va obrov­ským povr­chom, jeden mm3 posky­tu­je až 100150 m² plo­chy. Pou­ží­va sa aj v komerč­ne pre­dá­va­ných fil­troch. Doká­že čias­toč­ne zní­žiť aj tvrdo­sť vody. Tre­ba si však uve­do­miť, že jeho pôso­be­nie je naj­mä v nádr­žiach s rast­li­na­mi nežia­du­ce prá­ve kvô­li svo­jej adsorpč­nej schop­nos­ti. Aktív­ne uhlie totiž okrem iné­ho odo­be­rá rast­li­nám živi­ny. Samoz­rej­me, jeho schop­nos­ti sú vyčer­pa­teľ­né – po istom čase sa kapa­ci­ta nasý­ti a je nut­né aktív­ne uhlie buď rege­ne­ro­vať, ale­bo vyme­niť. Rege­ne­rá­cia je pro­ces che­mic­ký, pre akva­ris­tu prí­liš náklad­ný, vlast­ne zby­toč­ný. Čias­toč­ne by sa dalo rege­ne­ro­vať aktív­ne uhlie varom, ale aj to je dosť neprie­chod­né. Ak máme k dis­po­zí­cii práš­ko­vú for­mu aktív­ne­ho uhlia, máme vyhra­né – jeho účin­nosť je prak­tic­ky naj­vyš­šia a môže­me ho teda pou­žiť naj­men­ší objem. Rie­še­ním je imple­men­tá­cia do fil­tra, ale aj napr. nasy­pa­nie do pan­ču­chy a umiest­ne­nie do nádr­že. Ak sa nám časť rozp­tý­li, nezú­faj­me, aktív­ne uhlie je neškod­né, vodu nekalí.


Salt is recom­men­ded for Afri­can lake cich­lids. They con­tain rela­ti­ve­ly high con­cen­tra­ti­ons of sodium – Na. In lite­ra­tu­re, up to 0.5 kg per 100 liters of water is men­ti­oned, but I recom­mend one tab­les­po­on per 40 liters of water. Salt appe­ars to act as a tran­s­por­ter of meta­bo­lic pro­ces­ses and a cata­lyst. NaCl dis­so­cia­tes first into sodium cati­on and chlo­ri­ne ani­on. Chlo­ri­ne acts as a disin­fec­tant, and sodium par­ti­ci­pa­tes in bio­lo­gi­cal reac­ti­ons. Orga­nic dyes, drugs can be suc­cess­ful­ly remo­ved by acti­va­ted car­bon, par­tial­ly by peat. Acti­va­ted car­bon has a wide ran­ge of app­li­ca­ti­ons. It is a rela­ti­ve­ly effec­ti­ve pre­ven­ti­on against infec­ti­on becau­se it adsorbs a lot of harm­ful sub­stan­ces. It works as a fil­ter. It has such a struc­tu­re that it has a huge sur­fa­ce area, one mm3 pro­vi­des up to 100150 m² of area. It is also used in com­mer­cial­ly avai­lab­le fil­ters. It can also par­tial­ly redu­ce water hard­ness. Howe­ver, it should be rea­li­zed that its acti­on is unde­si­rab­le, espe­cial­ly in tanks with plants, due to its adsorp­ti­on capa­ci­ty. Acti­va­ted car­bon also remo­ves nut­rients from plants. Of cour­se, its capa­bi­li­ties are exhaus­tib­le – after some time, the capa­ci­ty beco­mes satu­ra­ted, and it is neces­sa­ry to eit­her rege­ne­ra­te or repla­ce the acti­va­ted car­bon. Rege­ne­ra­ti­on is a che­mi­cal pro­cess, too cost­ly for the aqu­arist, actu­al­ly unne­ces­sa­ry. Acti­va­ted car­bon could be par­tial­ly rege­ne­ra­ted by boiling, but this is quite imprac­ti­cal. If we have powde­red acti­va­ted car­bon avai­lab­le, we have won – its effi­cien­cy is prac­ti­cal­ly the hig­hest, and the­re­fo­re we can use the smal­lest volu­me. The solu­ti­on is to imple­ment it into the fil­ter, but also for exam­ple, to pour it into a stoc­king and pla­ce it in the tank. If some of it dis­per­ses, do not des­pair, acti­va­ted car­bon is harm­less, it does not cloud the water.


Salz wird afri­ka­nis­chen See­bunt­bars­chen emp­foh­len. Sie ent­hal­ten rela­tiv hohe Natrium­kon­zen­tra­ti­onen – Na. In der Lite­ra­tur wird bis zu 0,5 kg pro 100 Liter Was­ser erwähnt, aber ich emp­feh­le einen Ess­löf­fel pro 40 Liter Was­ser. Salz sche­int als Tran­s­por­te­ur von Stof­fwech­selp­ro­zes­sen und als Kata­ly­sa­tor zu wir­ken. NaCl dis­so­zi­iert zuerst in Natrium-​Kation und Chlorid-​Anion. Chlor wir­kt als Desin­fek­ti­ons­mit­tel, und Natrium nimmt an bio­lo­gis­chen Reak­ti­onen teil. Orga­nis­che Farb­stof­fe, Medi­ka­men­te kön­nen erfolg­re­ich durch Aktiv­koh­le, tei­lwe­i­se durch Torf ent­fernt wer­den. Aktiv­koh­le hat eine Viel­zahl von Anwen­dun­gen. Es ist eine rela­tiv effek­ti­ve Vor­be­ugung gegen Infek­ti­onen, da es vie­le schäd­li­che Sub­stan­zen adsor­biert. Es funk­ti­oniert wie ein Fil­ter. Es hat eine Struk­tur, die eine rie­si­ge Oberf­lä­che bie­tet, ein mm3 bie­tet bis zu 100150 m² Flä­che. Es wird auch in kom­mer­ziell erhält­li­chen Fil­tern ver­wen­det. Es kann auch den Här­teg­rad des Was­sers tei­lwe­i­se redu­zie­ren. Es soll­te jedoch erkannt wer­den, dass sei­ne Wir­kung in Tanks mit Pflan­zen uner­wün­scht ist, aufg­rund sei­ner Adsorp­ti­on­ska­pa­zi­tät. Aktiv­koh­le ent­fernt auch Nährs­tof­fe aus Pflan­zen. Natür­lich sind ihre Fähig­ke­i­ten beg­renzt – nach eini­ger Zeit wird die Kapa­zi­tät gesät­tigt, und es ist not­wen­dig, die Aktiv­koh­le zu rege­ne­rie­ren oder zu erset­zen. Die Rege­ne­ra­ti­on ist ein che­mis­cher Pro­zess, zu teuer für den Aqu­aria­ner, eigen­tlich unnötig. Aktiv­koh­le könn­te tei­lwe­i­se durch Kochen rege­ne­riert wer­den, aber das ist ziem­lich unp­rak­tisch. Wenn etwas davon zers­tre­ut wird, ver­zwe­i­feln Sie nicht, Aktiv­koh­le ist harm­los, sie trübt das Was­ser nicht.


Vo vode z vodo­vod­nej sie­te sa nachá­dza­jú rôz­ne plyn­né zlož­ky, kto­ré sú urče­né pre­dov­šet­kým pre dez­ifen­kciu. Pre člo­ve­ka sú nut­nos­ťou, ale z hľa­dis­ka živo­ta v akvá­ria je ich vplyv nežia­du­ci. Jed­ným z tých­to ply­nov je vše­obec­ne zná­my chlór. Je do jedo­va­tý plyn, aj pre člo­ve­ka, kto­rý však v níz­kych dáv­kach člo­ve­ku neško­dí a zabí­ja bak­té­rie. Pit­ná voda ho obsa­hu­je oby­čaj­ne 0.10.2 mg/​l, maxi­mál­ne do 0.5 mg/​l. Chlór ško­dí naj­mä žiab­ram rýb. Na to, aby sme sa chló­ru zba­vi­li, je napr. odstá­tie vhod­né. Exis­tu­jú na trhu príp­rav­ky na báze thi­osí­ra­nu sod­né­ho – Na2S2O3, kto­ré doká­žu zba­viť vody chló­ru. Odstá­tím vody sa zba­ví­me chló­ru pri­bliž­ne za jeden deň. Vode len musí­me dovo­liť, aby ply­ny mali kade uni­kať – tak­že žiad­ne uzav­re­té ban­das­ky. Čias­toč­ne pri okam­ži­tom napúš­ťa­ní vody, pomô­že čo naj­dl­h­ší tran­s­port vody v hadi­ci. Znač­ná časť chló­ru sa tak­to odpa­rí. Vo vode sa nachá­dza­jú aj iné ply­ny – k doko­na­lé­mu odply­ne­niu odstá­tím dôj­de po šty­roch dňoch. Pre výte­ry nie­kto­rých dru­hov sa pou­ží­va­jú rôz­ne výlu­hy, napr. výlu­hy vod­ných rast­lín. Tie doká­žu vodu doslo­va pri­pra­viť – sta­bi­li­zo­vať, poskyt­núť žia­da­né lát­ky, napr. sto­po­vé lát­ky, resp. doká­že snáď via­zať prí­pad­ne škod­li­vej­šie súčas­ti. Pou­ží­va sa aj dre­vo, dub, jel­ša, vŕba. Hodí sa aj hne­dé uhlie. Raše­li­na fun­gu­je ako čias­toč­ný adsor­bent. Na dru­hej stra­ne vode dodá­va humí­no­vé kyse­li­ny a iné orga­nic­ké lát­ky. Naj­mä v posled­nej dobe sa využí­va svet­lo ultra­fia­lo­vé na úpra­vu vody. Čas­to aj na jej ste­ri­li­zá­ciu od cho­ro­bo­plod­ných zárod­kov. Môže sa využiť aj tým spô­so­bom – kedy zasa­hu­je celý objem vody – napr. v prí­pa­de akút­nej cho­ro­by, no zväč­ša sa UV lam­pa pou­ží­va ako fil­ter, kto­rý účin­ne zba­vu­je vodu roz­lič­ných zárod­kov orga­niz­mov. Voda ošet­re­ná dosta­toč­ne sil­nou UV lam­pou sa napr. neza­ria­su­je. Jej pou­ži­tie eli­mi­nu­je mik­ro­biál­ne náka­zy na mini­mum. UV lam­py mož­no dostať bež­ne na trhu s akva­ris­tic­ký­mi potre­ba­mi. Ako sil­nú lam­pu – s akým prí­ko­nom nám urču­je objem nádr­že. UV lam­pu neod­po­rú­čam pou­ží­vať nepretržite.


In the water from the muni­ci­pal water supp­ly, vari­ous gase­ous com­po­nents are pre­sent, pri­ma­ri­ly inten­ded for disin­fec­ti­on. They are essen­tial for humans, but the­ir impact on aqu­arium life is unde­si­rab­le. One of the­se gases is chlo­ri­ne, which is a well-​known toxic gas, even for humans, but in low doses, it is harm­less to humans and kills bac­te­ria. Drin­king water usu­al­ly con­tains chlo­ri­ne in the ran­ge of 0.10.2 mg/​l, with a maxi­mum of up to 0.5 mg/​l. Chlo­ri­ne is par­ti­cu­lar­ly harm­ful to fish gills. To rid water of chlo­ri­ne, for exam­ple, let­ting it stand is suitab­le. The­re are pro­ducts on the mar­ket based on sodium thi­osul­fa­te – Na2S2O3, which can remo­ve chlo­ri­ne from water. Allo­wing water to stand will rid it of chlo­ri­ne in app­ro­xi­ma­te­ly one day. We just need to allow gases to esca­pe – so no clo­sed con­tai­ners. Par­tial­ly, imme­dia­te water fil­ling will help, with the lon­gest possib­le tran­s­port of water in the hose. A sig­ni­fi­cant por­ti­on of chlo­ri­ne will eva­po­ra­te this way. The­re are also other gases in the water – com­ple­te degas­sing by stan­ding occurs after four days. Vari­ous infu­si­ons are used for the swabs of some spe­cies, such as infu­si­ons of aqu­atic plants. The­se can lite­ral­ly pre­pa­re water – sta­bi­li­ze it, pro­vi­de desi­red sub­stan­ces, such as tra­ce ele­ments, or possib­ly bind more harm­ful com­po­nents. Wood is also used, oak, alder, wil­low. Bro­wn coal is also suitab­le. Peat acts as a par­tial adsor­bent. On the other hand, it adds humic acids and other orga­nic sub­stan­ces to the water. Espe­cial­ly recen­tly, ultra­vi­olet light has been used for water tre­at­ment. Often also for its ste­ri­li­za­ti­on from pat­ho­gens. It can also be used in such a way – when the enti­re volu­me of water is affec­ted – for exam­ple, in the case of an acu­te dise­a­se, but usu­al­ly, the UV lamp is used as a fil­ter, which effec­ti­ve­ly rids the water of vari­ous orga­nism pat­ho­gens. Water tre­a­ted with a suf­fi­cien­tly strong UV lamp, for exam­ple, does not beco­me clou­dy. Its use mini­mi­zes mic­ro­bial infec­ti­ons. UV lamps are rea­di­ly avai­lab­le on the mar­ket for aqu­arium supp­lies. As for a strong lamp – the wat­ta­ge is deter­mi­ned by the volu­me of the tank. I do not recom­mend using the UV lamp continuously.


Im Was­ser aus der städ­tis­chen Was­ser­ver­sor­gung sind vers­chie­de­ne gas­för­mi­ge Bes­tand­te­i­le vor­han­den, die haupt­säch­lich zur Desin­fek­ti­on bes­timmt sind. Sie sind für Men­schen uner­läss­lich, aber ihr Ein­fluss auf das Aqu­arium­le­ben ist uner­wün­scht. Eines die­ser Gase ist Chlor, das ein bekann­tes gif­ti­ges Gas ist, auch für Men­schen, aber in gerin­gen Dosen ist es für Men­schen harm­los und tötet Bak­te­rien ab. Trink­was­ser ent­hält nor­ma­ler­we­i­se Chlor im Bere­ich von 0,10,2 mg/​l, maxi­mal bis zu 0,5 mg/​l. Chlor ist beson­ders schäd­lich für die Kie­men der Fis­che. Um Was­ser von Chlor zu bef­re­ien, ist es beis­piel­swe­i­se gee­ig­net, es ste­hen zu las­sen. Es gibt Pro­duk­te auf dem Mar­kt, die auf Natriumt­hi­osul­fat – Na2S2O3, basie­ren und Chlor aus Was­ser ent­fer­nen kön­nen. Das Ste­hen­las­sen von Was­ser wird es in unge­fähr einem Tag von Chlor bef­re­ien. Wir müs­sen nur den Gasen erlau­ben zu ent­we­i­chen – also kei­ne gesch­los­se­nen Behäl­ter. Tei­lwe­i­se wird das sofor­ti­ge Befül­len mit Was­ser hel­fen, mit dem läng­stmög­li­chen Tran­s­port von Was­ser im Sch­lauch. Auf die­se Wei­se ver­duns­tet ein erheb­li­cher Teil des Chlors. Es gibt auch ande­re Gase im Was­ser – das volls­tän­di­ge Entga­sen durch Ste­hen­las­sen erfolgt nach vier Tagen. Für Abs­tri­che eini­ger Arten wer­den vers­chie­de­ne Infu­si­onen ver­wen­det, wie z.B. Infu­si­onen von Was­serpf­lan­zen. Die­se kön­nen das Was­ser buchs­täb­lich vor­be­re­i­ten – es sta­bi­li­sie­ren, gewün­sch­te Sub­stan­zen bere­its­tel­len, wie z.B. Spu­re­ne­le­men­te, oder mög­li­cher­we­i­se schäd­li­che­re Kom­po­nen­ten bin­den. Auch Holz wird ver­wen­det, Eiche, Erle, Wei­de. Braun­koh­le ist eben­falls gee­ig­net. Torf wir­kt als tei­lwe­i­ser Adsor­bens. Auf der ande­ren Sei­te fügt es dem Was­ser Humin­sä­u­ren und ande­re orga­nis­che Sub­stan­zen hin­zu. Beson­ders in letz­ter Zeit wird ultra­vi­olet­tes Licht zur Was­se­rauf­be­re­i­tung ver­wen­det. Oft auch zur Ste­ri­li­sa­ti­on von Kran­khe­it­ser­re­gern. Es kann auch so ver­wen­det wer­den – wenn das gesam­te Was­ser­vo­lu­men bet­rof­fen ist – zum Beis­piel im Fall einer aku­ten Kran­khe­it, aber in der Regel wird die UV-​Lampe als Fil­ter ver­wen­det, der das Was­ser effek­tiv von vers­chie­de­nen Organismus-​Erregern bef­re­it. Was­ser, das mit einer aus­re­i­chend star­ken UV-​Lampe behan­delt wird, wird zum Beis­piel nicht trüb. Ihr Ein­satz mini­miert mik­ro­biel­le Infek­ti­onen. UV-​Lampen sind auf dem Mar­kt für Aqu­arium­zu­be­hör leicht erhält­lich. Was eine star­ke Lam­pe bet­rifft – die Leis­tung wird durch das Volu­men des Tanks bes­timmt. Ich emp­feh­le nicht, die UV-​Lampe kon­ti­nu­ier­lich zu verwenden.

Use Facebook to Comment on this Post

Akvaristika, Biológia, Technika

Vzduchovanie a kyslík vo vode

Hits: 35489

Kys­lík je plyn, kto­rý sa v našich mys­liach spá­ja so živo­tom. Pri­már­nym zdro­jom kys­lí­ka sú rast­li­ny. Vo vode je ho ove­ľa menej ako vo vzdu­chu. Kon­cen­trá­cia kys­lí­ka vo vode je závis­lá od tep­lo­ty vody. Čím je tep­lo­ta v akvá­riu vyš­šia, tým je kon­cen­trá­cia O2 niž­šia. Pri tep­lo­te 10°C pri bež­nom tla­ku je vo vode roz­pus­te­ných asi 11.3 mg O2 v lit­ri, pri tep­lo­te 25°C – 8.3 mg/​l a pri 30°C – 7.6 mg/​l. Do vody sa kys­lík okrem pôso­be­nia vod­ných rast­lín dostá­va aj difú­zi­ou zo vzdu­chu, pre­mie­ša­va­ním, čere­ním hla­di­ny. Kys­lík sa spot­re­bú­va v akvá­riu hlav­ne roz­klad­nou čin­nos­ťou mik­ro­or­ga­niz­mov – v sub­strá­te dna. Ak je dno málo pre­vzduš­ne­né, môže dôjsť k jeho defi­ci­tu a tým k jeho vyčer­pa­niu pre ryby a rast­li­ny. Kys­lík napo­má­ha roz­kla­du hmo­ty. Čis­tý, 100 % kon­cen­tro­va­ný kys­lík je pre ľud­ský orga­niz­mus jedo­va­tý, tak­že ak hovo­rím o kys­lí­ku v súvis­los­ti so vzdu­cho­va­ním, ide samoz­rej­me o vzduch. Vzduch obsa­hu­je aj veľa dusí­kaCO2. Rast­li­nám kys­lík až tak veľ­mi nevo­nia”, naj­mä nie cez deň a za dosta­toč­né­ho prí­su­nu sve­tel­nej ener­gie. Aj ak spô­so­bu­je vzdu­cho­va­nie veľ­ký pohyb vody, rast­li­nám to nepro­spie­va. Naopak cez noc, kedy rast­li­ny kys­lík pri­jí­ma­jú by bol pre ne kys­lík víta­ný. Cez deň rast­li­ny pri­jí­ma­jú oxid uhli­či­tý – ide o pro­ces foto­syn­té­zy a z nej vyplý­va­jú­cich pro­ce­sov ako napr. Kreb­sov cyk­lus, cyk­lus C, N, apod. Vzdu­cho­va­nie homo­ge­ni­zu­je vodu v akvá­riu, zabez­pe­ču­je pohyb vody, mie­ša­nie jed­not­li­vých vrs­tiev, naj­mä ver­ti­kál­nym sme­rom. Množ­stvo kys­lí­ka, kto­ré doká­že vzdu­cho­va­nie odo­vzdať akvá­riu je pomer­ne níz­ke – difú­zia ply­nov vo vode je rádo­vo šty­ri krát niž­šia ako vo vzdu­chu. Dar­mo bude­me vytvá­rať veľ­ké bub­lin­ky, tie síce viac rozp­rú­dia vodu, ale množ­stvo pri­ja­té­ho kys­lí­ka vodou bude niž­šie ako keby sme pro­du­ko­va­li men­šie bub­lin­ky. Množ­stvo tak­to pri­ja­té­ho kys­lí­ka závi­sí na povr­chu bub­li­niek, kto­rý je vyš­ší pri men­ších bublinkách.

Vzdu­cho­va­cí kameň môže mať rôz­ny tvar. Môže to byť valec, gulič­ka, môže byť podl­ho­vas­tý, až 105 cm dlhý. Exis­tu­jú kame­ne tva­ru obvo­du kru­hu. Podob­ne ako vzdu­cho­va­cí kameň je mož­né pou­žiť lipo­vé driev­ko, kto­ré tvo­rí malé bub­lin­ky. Jeho nevý­ho­da je vtom, že sa póry v ňom rých­lo uzav­rú. Pou­ží­va sa skôr pri difú­zii CO2 – pri hno­je­ní rast­lín. Navy­še sa lipo­vé driev­ko roz­kla­dá a obras­tá ria­sa­mi. Urči­te neopo­me­nu­teľ­ným spô­so­bom tran­s­por­tu kys­lí­ka do vody je čere­nie hla­di­ny, kto­ré spô­so­bu­je buď vzdu­cho­va­nie cez kameň, ale­bo fil­ter. Väč­ši­na návo­dov na pou­ží­va­nie fil­tra odpo­rú­ča umiest­niť fil­ter tak, aby vývod vody bol na hla­di­nou ale­bo tes­ne pod ňou. Aj tak­to sa dostá­va kys­lík do vody. Na vzdu­cho­va­nie sa v akva­ris­ti­ke pou­ží­va­jú dmy­chad­lá, z kto­rých je vzduch pohá­ňa­ný vzduch do hadi­čiek buď do vzdu­cho­va­cích kame­ňov, ale­bo do fil­trov. Ja pou­ží­vam nie­koľ­ko typov motor­če­kov o rôz­nej sile. Dmy­chad­lo by malo byť umiest­ne­né nad všet­ký­mi hla­di­na­mi, do kto­rých vhá­ňa vzduch, aby sa pre­d­iš­lo pri výpad­ku prú­du samos­pá­do­vé­mu vnik­nu­tiu vody do kom­pre­so­ra. V prí­pa­de, že nie je mož­né kom­pre­sor tak­to umiest­niť, hadič­ku na jej ces­te od kom­pre­so­ra ku akvá­riám najprv vedie­me meter nad úro­veň naj­vyš­šej hla­di­ny, ale­bo zabez­pe­čí­me iné tech­nic­ké rie­še­nie, kto­ré zabrá­ni nasá­va­niu vody, napr. pou­ži­jem spät­ný ven­til. Ak sa nie­ke­dy stret­ne­te s poj­mom koryt­nač­ka, tak vedz­te že mož­no pôj­de o väč­šie dmy­chad­lo, kto­ré je pre väč­ší prie­mer trub­ky, resp. hadi­ce (napr. záh­rad­nej). Čas­to sa pou­ží­va tam, kde je via­cej nádr­ží. Dru­há mož­nosť je vzdu­cho­vať cez fil­ter. Nie­kto­ré fil­tre doká­žu otvo­rom vo vrch­nej čas­ti fil­tra nasá­vať cez pri­po­je­nú hadič­ku vzduch. Ja to využí­vam, a pova­žu­jem ten­to spô­sob sa lep­ší, funkč­nej­ší. Hadič­ka sa dá pri­škr­tiť pod­ľa potre­by, aby posky­to­va­la vzduch ako vám vyho­vu­je. Tak­to pris­pô­so­be­né vzdu­cho­va­nie má lep­ší efekt, pre­to­že bub­lin­ky sú vhá­ňa­né do vody vodo­rov­ne a sú men­šie ak to potre­bu­je­me. Zrej­me aj tým, že majú istú zotr­vač­nosť a malý objem, ich pre­sun na hla­di­nu a teda vypa­re­nie trvá ove­ľa dlh­šie než pri vzdu­cho­va­ní kame­ňom. Difú­zia ply­nov do vody je účin­nej­šia, pre­to­že trvá dlh­šie a pre­bie­ha na väč­šom povrchu.


Oxy­gen is a gas that we asso­cia­te with life in our minds. Plants are the pri­ma­ry sour­ce of oxy­gen. The­re is much less oxy­gen in water than in the air. The con­cen­tra­ti­on of oxy­gen in water depends on the water tem­pe­ra­tu­re. The hig­her the tem­pe­ra­tu­re in the aqu­arium, the lower the con­cen­tra­ti­on of O2. At a tem­pe­ra­tu­re of 10°C at nor­mal pre­ssu­re, the­re are about 11.3 mg of O2 dis­sol­ved in a liter of water, at a tem­pe­ra­tu­re of 25°C – 8.3 mg/​l, and at 30°C – 7.6 mg/​l. Oxy­gen enters the water not only through the acti­on of aqu­atic plants but also through dif­fu­si­on from the air, mixing, and sur­fa­ce agi­ta­ti­on. Oxy­gen is main­ly con­su­med in the aqu­arium by the decom­po­si­ti­on acti­vi­ty of mic­ro­or­ga­nisms in the sub­stra­te. If the sub­stra­te is poor­ly aera­ted, this can lead to a defi­cien­cy and dep­le­ti­on of oxy­gen for fish and plants. Oxy­gen pro­mo­tes the bre­ak­do­wn of mat­ter. Pure, 100% con­cen­tra­ted oxy­gen is toxic to the human body, so when I talk about oxy­gen in the con­text of aera­ti­on, I’m refer­ring, of cour­se, to air. Air also con­tains a lot of nit­ro­gen and CO2. Plants don’t like” oxy­gen all that much, espe­cial­ly not during the day and with suf­fi­cient supp­ly of light ener­gy. Even though aera­ti­on cau­ses sig­ni­fi­cant water move­ment, it is not bene­fi­cial for plants. On the con­tra­ry, oxy­gen would be wel­co­me for them during the night when plants absorb oxy­gen. During the day, plants absorb car­bon dioxi­de – this is the pro­cess of pho­to­synt­he­sis and the resul­ting pro­ces­ses such as the Krebs cyc­le, the C cyc­le, N cyc­le, etc. Aera­ti­on homo­ge­ni­zes the water in the aqu­arium, pro­vi­des water move­ment, and mixes indi­vi­du­al lay­ers, espe­cial­ly ver­ti­cal­ly. The amount of oxy­gen that aera­ti­on can deli­ver to the aqu­arium is rela­ti­ve­ly low – the dif­fu­si­on of gases in water is orders of mag­ni­tu­de lower than in air. It is poin­tless to cre­a­te lar­ge bubb­les; alt­hough they may agi­ta­te the water more, the amount of oxy­gen absor­bed by the water will be lower than if we pro­du­ced smal­ler bubb­les. The amount of oxy­gen absor­bed in this way depends on the sur­fa­ce area of the bubb­les, which is hig­her with smal­ler bubbles.

An airs­to­ne can have vari­ous sha­pes. It can be cylin­dri­cal, sphe­ri­cal, or elon­ga­ted, up to 105 cm long. The­re are sto­nes sha­ped like the cir­cum­fe­ren­ce of a circ­le. Simi­lar­ly to an airs­to­ne, a wood dif­fu­ser can be used, which cre­a­tes small bubb­les. Its disad­van­ta­ge is that the pores in it clo­se quick­ly. It is used more for CO2 dif­fu­si­on – for plant fer­ti­li­za­ti­on. More­over, the wood dif­fu­ser decom­po­ses and beco­mes cove­red with algae. Anot­her essen­tial way to tran­s­port oxy­gen into the water is sur­fa­ce agi­ta­ti­on, which eit­her aera­tes through the sto­ne or fil­ter. Most fil­ter usa­ge ins­truc­ti­ons recom­mend pla­cing the fil­ter so that the water out­let is at or just below the sur­fa­ce. This way, oxy­gen gets into the water. In aqu­aris­tics, air pumps are used for aera­ti­on, from which air is dri­ven through tubes eit­her to airs­to­nes or fil­ters. I use seve­ral types of air pumps of vary­ing power. The air pump should be posi­ti­oned abo­ve all water levels into which it deli­vers air to pre­vent water from ente­ring the com­pres­sor in the event of a power outa­ge. If it is not possib­le to pla­ce the com­pres­sor in this way, the tube on its way from the com­pres­sor to the aqu­arium is first led one meter abo­ve the hig­hest water level, or anot­her tech­ni­cal solu­ti­on is pro­vi­ded to pre­vent water from ente­ring, for exam­ple, I use a check val­ve. If you ever come across the term turt­le,” it might refer to a lar­ger air pump desig­ned for a lar­ger pipe or hose (e.g., gar­den). It is often used whe­re the­re are mul­tip­le tanks. Anot­her opti­on is to aera­te through the fil­ter. Some fil­ters can draw air through a con­nec­ted tube into the upper part of the fil­ter. I use this met­hod and con­si­der it bet­ter and more func­ti­onal. The tube can be adjus­ted as needed to pro­vi­de air as you like. This adap­ted aera­ti­on has a bet­ter effect becau­se the bubb­les are intro­du­ced into the water hori­zon­tal­ly and are smal­ler if needed. Pro­bab­ly also becau­se they have a cer­tain iner­tia and a small volu­me, the­ir move­ment to the sur­fa­ce and the­re­fo­re eva­po­ra­ti­on takes much lon­ger than with sto­ne aera­ti­on. Gas dif­fu­si­on into the water is more effec­ti­ve becau­se it takes lon­ger and occurs over a lar­ger sur­fa­ce area.


Sau­ers­toff ist ein Gas, das wir in unse­ren Köp­fen mit Leben ver­bin­den. Pflan­zen sind die pri­mä­re Quel­le für Sau­ers­toff. Im Was­ser gibt es viel weni­ger Sau­ers­toff als in der Luft. Die Kon­zen­tra­ti­on von Sau­ers­toff im Was­ser hängt von der Was­ser­tem­pe­ra­tur ab. Je höher die Tem­pe­ra­tur im Aqu­arium ist, des­to gerin­ger ist die Kon­zen­tra­ti­on von O2. Bei einer Tem­pe­ra­tur von 10°C bei nor­ma­lem Druck gibt es etwa 11,3 mg O2 pro Liter Was­ser, bei einer Tem­pe­ra­tur von 25°C – 8,3 mg/​l und bei 30°C – 7,6 mg/​l. Sau­ers­toff gelangt nicht nur durch die Wir­kung von Was­serpf­lan­zen ins Was­ser, son­dern auch durch Dif­fu­si­on aus der Luft, durch Ver­mis­chung und Oberf­lä­chen­be­we­gung. Sau­ers­toff wird im Aqu­arium haupt­säch­lich durch die Zer­set­zung­sak­ti­vi­tät von Mik­ro­or­ga­nis­men im Sub­strat verb­raucht. Ist das Sub­strat sch­lecht belüf­tet, kann dies zu einem Man­gel und einer Ers­chöp­fung von Sau­ers­toff für Fis­che und Pflan­zen füh­ren. Sau­ers­toff för­dert den Abbau von Mate­rie. Rei­ner, 100% kon­zen­trier­ter Sau­ers­toff ist für den men­sch­li­chen Kör­per gif­tig, daher mei­ne ich, wenn ich über Sau­ers­toff im Zusam­men­hang mit Belüf­tung spre­che, natür­lich Luft. Luft ent­hält auch viel Sticks­toff und CO2. Pflan­zen mögen” Sau­ers­toff nicht so sehr, beson­ders nicht tag­süber und bei aus­re­i­chen­der Lich­te­ner­gie. Auch wenn die Belüf­tung zu einer erheb­li­chen Was­ser­be­we­gung führt, ist dies nicht för­der­lich für Pflan­zen. Im Gegen­te­il, Sau­ers­toff wäre für sie wäh­rend der Nacht, in der Pflan­zen Sau­ers­toff auf­neh­men, will­kom­men. Tag­süber neh­men Pflan­zen Koh­len­di­oxid auf – dies ist der Pro­zess der Pho­to­synt­he­se und der daraus resul­tie­ren­den Pro­zes­se wie dem Cit­rat­zyk­lus, dem C‑Zyklus, dem N‑Zyklus usw. Belüf­tung homo­ge­ni­siert das Was­ser im Aqu­arium, sorgt für Was­ser­be­we­gung und mischt ein­zel­ne Schich­ten, ins­be­son­de­re ver­ti­kal. Die Men­ge an Sau­ers­toff, die Belüf­tung dem Aqu­arium zufüh­ren kann, ist rela­tiv gering – die Dif­fu­si­on von Gasen im Was­ser ist um Größe­nord­nun­gen gerin­ger als in der Luft. Es ist sinn­los, gro­ße Bla­sen zu erze­ugen; obwohl sie das Was­ser mehr bewe­gen kön­nen, ist die Men­ge an Sau­ers­toff, die das Was­ser auf­nimmt, gerin­ger als bei kle­i­ne­ren Bla­sen. Die Men­ge an auf die­se Wei­se auf­ge­nom­me­nem Sau­ers­toff hängt von der Oberf­lä­che der Bla­sen ab, die bei kle­i­ne­ren Bla­sen höher ist.

Ein Lufts­te­in kann vers­chie­de­ne For­men haben. Er kann zylin­drisch, kugel­för­mig oder län­glich bis zu 105 cm lang sein. Es gibt Ste­i­ne in Form des Umfangs eines Kre­i­ses. Ähn­lich wie ein Lufts­te­in kann ein Holz­dif­fu­sor ver­wen­det wer­den, der kle­i­ne Bla­sen erze­ugt. Sein Nach­te­il ist, dass sich die Poren darin schnell sch­lie­ßen. Es wird eher für die CO2-​Diffusion – zur Pflan­zen­dün­gung ver­wen­det. Außer­dem zer­setzt sich der Holz­dif­fu­sor und wird von Algen über­zo­gen. Eine wei­te­re wich­ti­ge Mög­lich­ke­it, Sau­ers­toff ins Was­ser zu tran­s­por­tie­ren, ist die Oberf­lä­chen­be­we­gung, die ent­we­der durch den Ste­in oder den Fil­ter belüf­tet. Die meis­ten Anwe­i­sun­gen zur Fil­ter­ver­wen­dung emp­feh­len, den Fil­ter so zu plat­zie­ren, dass der Was­se­rab­lauf auf oder knapp unter der Oberf­lä­che liegt. So gelangt Sau­ers­toff ins Was­ser. In der Aqu­aris­tik wer­den Luft­kom­pres­so­ren zur Belüf­tung ver­wen­det, aus denen Luft durch Sch­lä­u­che ent­we­der zu Lufts­te­i­nen oder Fil­tern gele­i­tet wird. Ich ver­wen­de meh­re­re Arten von Luft­kom­pres­so­ren unters­chied­li­cher Leis­tung. Der Luft­kom­pres­sor soll­te über allen Was­sers­tän­den plat­ziert wer­den, in die er Luft abgibt, um zu ver­hin­dern, dass Was­ser bei einem Stro­maus­fall in den Kom­pres­sor gelangt. Ist es nicht mög­lich, den Kom­pres­sor auf die­se Wei­se zu plat­zie­ren, wird das Rohr auf sei­nem Weg vom Kom­pres­sor zum Aqu­arium zunächst einen Meter über dem höchs­ten Was­sers­tand gefü­hrt, oder es wird eine ande­re tech­nis­che Lösung bere­it­ges­tellt, um das Ein­drin­gen von Was­ser zu ver­hin­dern, zum Beis­piel ver­wen­de ich ein Rücksch­lag­ven­til. Wenn Sie jemals auf den Beg­riff Schildk­röte” sto­ßen, könn­te dies sich auf eine größe­re Luft­pum­pe für ein größe­res Rohr oder einen Sch­lauch (z.B. Gar­ten) bez­ie­hen. Es wird oft dort ver­wen­det, wo es meh­re­re Tanks gibt. Eine ande­re Mög­lich­ke­it ist die Belüf­tung durch den Fil­ter. Eini­ge Fil­ter kön­nen Luft durch einen angesch­los­se­nen Sch­lauch in den obe­ren Teil des Fil­ters zie­hen. Ich ver­wen­de die­se Met­ho­de und hal­te sie für bes­ser und funk­ti­ona­ler. Der Sch­lauch kann je nach Bedarf ange­passt wer­den, um Luft zu lie­fern, wie es Ihnen gefällt. Die­se ange­pass­te Belüf­tung hat eine bes­se­re Wir­kung, weil die Bla­sen hori­zon­tal in das Was­ser ein­ge­fü­hrt wer­den und kle­i­ner sind, wenn nötig. Wahrs­che­in­lich auch, weil sie eine gewis­se Träg­he­it und ein kle­i­nes Volu­men haben, dau­ert ihre Bewe­gung zur Oberf­lä­che und damit die Ver­duns­tung viel län­ger als bei Ste­in­be­lüf­tung. Die Gas­dif­fu­si­on ins Was­ser ist effek­ti­ver, weil sie län­ger dau­ert und über eine größe­re Oberf­lä­che stattfindet.

Use Facebook to Comment on this Post

Akvaristika, Organizmy, Príroda, Údržba, Živočíchy

Založenie akvária

Hits: 57596

Pri zakla­da­ní akvá­ria je ide­ál­ne, ak si akva­ris­ta najprv zaob­sta­rá samot­nú nádrž a sto­jan, vyba­ví sa potreb­nou tech­ni­kou a až potom si zado­vá­ži vod­né rast­li­nyryby. Pred zado­vá­že­ním nádr­že pre vaše rybič­ky sto­jí­me pred základ­nou otáz­kou, aké veľ­ké bude vaše nové akvá­ri­um. Kaž­do­pád­ne je dob­ré, ak chce­me cho­vať ryby, aby sme pred­tým roz­mýš­ľa­li, kde bude ich život­ný pries­tor, v čom budú exis­to­vať. Nuž a to so sebou pri­ne­sie aj odpo­ve­de na otáz­ky, aký bude zabe­rať pries­tor samot­ná nádrž, či bude nut­ný sto­jan, akú pou­žiť elek­tro­in­šta­lá­ciu, tech­ni­ku, pomôc­ky. Ako zalo­žiť akvá­ri­um, aby fun­go­va­lo pod­ľa vašich pred­stáv? Ak máme novú nádrž, kto­rá je čerstvo zle­pe­ná, odpo­rú­čam umyť naj­mä spo­je octom a násled­ne celú nádrž oplách­nuť vodou. Do nádr­že nasyp­me na dno štrk. Štrk by mal byť skôr hlad­ký. Na ostrých hra­nách sa ryby môžu pora­niť. Dno akvá­ria je veľ­mi dôle­ži­té. Ryby pro­du­ku­jú exkre­men­ty, kto­rý spra­cú­va naj­mä mik­rof­ló­ra a neskôr z neho čer­pa­jú živi­ny rast­li­ny. Ide­ál­ne je pou­žiť rieč­ny štrk. Ak pou­ži­je­me mor­ský a záro­veň kre­mi­či­tý štrk, nemu­sí­me sa sta­rať o uvoľ­ňo­va­nie vápe­na­tých a horeč­na­tých solí do vody, čiže štrk vám nebu­de zvy­šo­vať tvrdo­sť vody.

Ak chce­me úspeš­ne pes­to­vať rast­li­ny, odpo­rú­čam jem­ný štrk s veľ­kos­ťou frak­cie 14 mm. Samoz­rej­me jed­not­li­vé dru­hy rýb majú rôz­ne náro­ky na veľ­kosť štr­ku. Štrk dosta­ne­me kúpiť v akva­ris­tic­kom obcho­de, ale­bo si ho zado­vá­ži­me vlast­ný­mi pros­tried­ka­mi. Ak máme mož­nosť, pou­ži­me tzv. sta­rý štrk z nádr­že od zná­me­ho, prí­pad­ne si pomô­že­me z iné­ho už zabe­hnu­té­ho akvá­ria. Taký­to štrk už v sebe obsa­hu­je mik­ro­or­ga­niz­my, kto­ré napo­mô­žu úspeš­né­mu roz­vo­ju vašej nádr­že. Vaše akvá­ri­um tak­to sa rých­lej­šie zabeh­ne. Štrk z obcho­du ale­bo z prí­ro­dy pred pou­ži­tím pre­my­me vo vode. Štrk sám je chu­dob­ný na využi­teľ­né živi­ny, ale je sub­strá­tom pre roz­voj mik­ro­or­ga­niz­mov. Štrk na vami poža­do­va­nú veľ­kosť si môže­me sami pre­osiať. Do jem­nej­šie­ho štr­ku sa aj rast­li­ny sadia lep­šie. Do štr­ku môže­me pri zakla­da­ní akvá­ria hneď pri­dať aj hno­ji­vo, sub­strát pre rast­li­ny, napr. kús­ky dre­va, jel­šo­vé šiš­ky, raše­li­nu, pev­né komerč­né ale­bo vlast­né hno­ji­vo. Všet­ko pod­ľa náro­kov a mož­nos­tí váš­ho budú­ce­ho akvá­ria. Mini­mál­ne množ­stvo štr­ku, kto­ré si dob­ré akvá­ri­um vyža­du­je, je 5 cm po plo­che celé­ho dna. Ak však chce­me docie­liť per­fekt­ný rast rast­lín, je vhod­ná 10 cm vrstva štr­ku. Všet­ko závi­sí na tom, čo chce­me a aké máme pros­tried­ky. Do men­šie­ho akvá­ria prav­de­po­dob­ne dáme niž­šiu vrstvu štr­ku ako do väč­šie­ho. Vhod­nosť závi­sí aj od dru­hov vod­ných rast­lín, kto­ré chce­me pes­to­vať. Mohut­nej­šie rast­li­ny vyža­du­jú vyš­šiu vrstvu štrku.

Dno môže­me tva­ro­vať, v zása­de vza­du je kraj­šie a prak­tic­kej­šie mať vyš­šiu vrstvu ako vpre­du. Štrk sa však časom začne hýbať“, a pre­to môže­me vytvo­riť tera­sy ale­bo pou­žiť iné tech­nic­ké rie­še­nia, kto­ré zafi­xu­jú tvar dna. Pie­sok do akvá­ria v zása­de nepat­rí. Ak pred­sa len pie­sok chce­me, tak pou­ži­me hru­bo­zrn­ný. Jem­ný pie­sok tvo­rí ťaž­ké, zľa­hnu­té, málo prie­pust­né dno. Do akvá­ria urči­te chce­me nasa­diť ryby a rast­li­ny. Len­že na to, aby sa ryby a rast­li­ny moh­li v akvá­riu cítiť dob­re, a aby sa vám akvá­ri­um páči­lo, je nut­né pou­žiť deko­rá­ciu a potreb­nú tech­ni­ku. Zalo­žiť akvá­ri­um bez tech­ni­ky, prí­pad­ne s mini­mom tech­ni­ky mož­né je, začia­toč­ní­kom to však neod­po­rú­čam. Ak už máte v nádr­ži štrk, osaď­te tech­ni­ku a deko­rá­ciu. Tech­ni­ka sa dá zakryť deko­rá­ci­ou, prav­da­že aj rast­li­na­mi a je vhod­né na to mys­lieť dopre­du. Ako deko­rá­ci­ou sa dá pou­žiť ska­la, dre­vo, kera­mic­ká jas­kyn­ka apod. Viac o tom v samos­tat­nom člán­ku.

Tech­ni­ku tvo­rí napr. fil­ter, ohrie­vač, vzdu­cho­va­cí kameň, tep­lo­mer. V prí­pa­de ak pou­ži­je­te 3D poza­die, je urči­te vhod­nej­šie ho inšta­lo­vať do nena­pus­te­nej nádr­že. Tape­ta na zadnú ste­nu sa rov­na­ko ľah­šie nale­pu­je na prázd­ne akvá­ri­um, aj keď ja som pro­ti tape­tám v bež­nej akva­ris­tic­kej pra­xi. Na cel­kom prázd­ne akvá­ri­um sa výbor­ne nale­pu­je samo­le­pia­ca fólia, pre­fe­ru­jem čier­nu a lepím ju čas­to aj na boč­né ste­ny. Samoz­rej­me, pat­rí na zadnú ste­nu. Keď ste tie­to kro­ky absol­vo­va­li, pri­stúp­me ku napus­te­niu nádr­že vodou. Viac sa hodí stu­de­ná voda. Ak je k dis­po­zí­cii, je vhod­né pou­žiť aj zabe­hnu­tú vodu z iné­ho akvá­ria. Napr. od neja­ké­ho akva­ris­tu, prí­pad­ne z akvá­ria kto­ré už neja­ký čas máme. Celý pro­ces zabe­hnu­tia akvá­ria to uľah­čí a urých­li. Po napus­te­ní vody zapni­me fil­ter a nechaj­me vodu fil­tro­vať aspoň týž­deň. Ana­lo­gic­ky, ak máme mož­nosť, infi­kuj­me fil­trač­nú hmo­tu vodou z iné­ho akvá­ria. Napr. tak, že sta­rú vlož­ku vyper­me vo vode z akvá­ria a novú vlož­ku v tej­to zaka­la­nej vode umy­me“. Tým sa mik­ro­oga­niz­my naoč­ku­jú do novej vlož­ky a urých­li sa pro­ces zave­de­nia filtra.

S rast­li­na­mi a ryba­mi zatiaľ trpez­li­vo vyčkaj­me. Po týžd­ni vypus­ti­me tre­ti­nu vody a nasaď­me rast­li­ny – ide­ál­ne rých­lo­ras­tú­ce dru­hy ako Sagit­ta­ria subu­la­ta, Hyg­rop­hi­la polys­pe­ma a zapni­me osvet­le­nie vzdu­cho­va­nie. Vzdu­cho­va­nie je veľ­mi účin­ný nástroj na potla­če­nie mno­hých nepriaz­ni­vých situ­ácií. Osvet­le­nie nechaj­me zapnu­té po dobu 12 hodín den­ne. Ten­to stav pone­chaj­me ďal­ších aspoň 5 dní. Cyk­lus dusí­ka trvá nie­čo vyše mesia­ca. Po dvoch týžd­ňoch od napus­te­nia vody je kon­cen­trá­cia amo­nia­ku naj­vyš­šia. V prí­pa­de, že sme nie­čo zaned­ba­li, môže sa nám stať, že zací­ti­me amo­niak. To ale zna­me­ná, že sme nie­kde spra­vi­li chy­bu. Ak sme dovte­dy nena­sa­di­li rast­li­ny, tak teraz je tá správ­na chví­ľa. Navy­še tre­ba zapnúť vzdu­cho­va­nie. Po troch – šty­roch týžd­ňoch môže­me nasa­diť ryby. Sta­rost­li­vo sle­duj­me ich sprá­va­nie, prí­pad­né zna­ky cho­ro­by ale­bo otra­vy neza­ned­baj­me. V prí­pa­de veľ­kých prob­lé­mov vyme­ní­me časť vody, pri­daj­me vzdu­cho­va­nie, v extrém­nom prí­pa­de vylov­te ryby do inej vody, tre­bárs aj čerstvej.

Koľ­ko rýb však vo svo­jom akvá­riu cho­vať? V prvom rade neod­po­rú­čam pre­ryb­ňo­vať nádrž. Tre­ba uvá­žiť, že ryby časom vyras­tú, pri­čom ras­tú celý život. Iné náro­ky vyža­du­jú väč­šie dru­hy rýb ako men­šie. Situ­ácia závi­sí aj od tech­ni­ky, od špe­ci­fic­kých vlast­nos­tí jed­not­li­vých dru­hov. Veľ­mi zhru­ba sa dá pove­dať, že na cen­ti­me­ter dĺž­ky tela ryby by sme mali rátať s lit­rom vody. Pove­dz­me, že máme 1 000 lit­ro­vé akvá­ri­um. Moh­lo by v ňom byť napr. 200300 neóniek, ale­bo 50 väč­ších dru­hov rýb veľ­kos­ti 1020 cm. V prí­pa­de, že nasa­dí­te prí­liš malý počet rýb, vaše ryby môžu vyka­zo­vať zme­ny v sprá­va­ní od nor­má­lu. Napr. veľ­kú vyľa­ka­nosť strach. V takom prí­pa­de je dob­ré uva­žo­vať o zvý­še­ní počtu rýb s ohľa­dom na ich budú­cu veľ­kosť. Pomô­že aj vytvo­re­nie via­ce­rých úkry­tov. Vaše akvá­ri­um, ryby, osa­den­stvo aj tech­ni­ka si bude vyža­do­vať váš čas a vedo­mos­ti, bez toho to nepôj­de. Na dru­hej stra­ne vám doká­že uká­zať nád­her­né veci a vie byť pek­ným dopl­n­kom vo vašej domác­nos­ti. Kým sa akvá­ri­um zabeh­ne, uply­nie pol roka. Mož­no nasta­nú prob­lé­my, nene­chaj­me sa však odra­diť. Udr­žia­vať akvá­ri­um nie je jed­no­du­ché, naj­mä pre začia­toč­ní­ka. Akvá­ri­um závi­sí od mno­hých fak­to­rov. Tre­ba sa im len sna­žiť poro­zu­mieť. Skús­me sa na to pozrieť tak, že even­tu­ál­ne stra­ty, ku kto­rým sami nein­for­mo­va­nos­ťou ale­bo zľah­če­ním môže­me dospieť, sa ude­jú z náš­ho vrec­ka. Často­krát počú­vam postu­py, kto­ré sa sna­žia o bles­ko­vé zave­de­nie rýb. Zväč­ša sa to potom kon­čí mojím kon­šta­to­va­ním: Veď vy ste tie ryby otrá­vi­li”. Bon­mo­ty naučil som ryby plá­vať znak.” nie sú pre ryby šťast­né. Akvá­ri­um si vyža­du­je, aby sa mu člo­vek veno­val a ono sa mu potom odvďa­čí. Želám všet­kým akva­ris­tom veľa úspe­chov s ich akváriami.


When set­ting up an aqu­arium, it’s ide­al for the aqu­arist to first acqu­ire the tank itself and a stand, equ­ip it with the neces­sa­ry equ­ip­ment, and then pro­cu­re aqu­atic plants and fish. Befo­re obtai­ning the tank for your fish, you face the fun­da­men­tal ques­ti­on of how lar­ge your new aqu­arium will be. Nevert­he­less, it’s good prac­ti­ce, if we intend to keep fish, to con­si­der befo­re­hand whe­re the­ir living spa­ce will be, how they will exist. This will lead to answers about the size of the tank itself, whet­her a stand will be neces­sa­ry, what elect­ri­cal ins­tal­la­ti­on, equ­ip­ment, and tools to use. How to set up an aqu­arium to make it work accor­ding to your pre­fe­ren­ces? If we have a new tank that has just been sea­led, I recom­mend was­hing the joints with vine­gar and then rin­sing the enti­re tank with water. Fill the bot­tom of the tank with gra­vel. The gra­vel should be smo­oth rat­her than sharp-​edged to pre­vent fish from get­ting inju­red. The bot­tom of the aqu­arium is very impor­tant. Fish pro­du­ce was­te, which is main­ly pro­ces­sed by mic­rof­lo­ra and later absor­bed by plants. It’s ide­al to use river gra­vel. If we use mari­ne and sili­ce­ous gra­vel, we don’t need to wor­ry about the rele­a­se of cal­cium and mag­ne­sium salts into the water, so the gra­vel won’t inc­re­a­se water hardness.

If we want to suc­cess­ful­ly grow plants, I recom­mend using fine gra­vel with a par­tic­le size of 14 mm. Of cour­se, dif­fe­rent types of fish have dif­fe­rent requ­ire­ments for gra­vel size. Gra­vel can be pur­cha­sed at a pet sto­re or obtai­ned by other means. If possib­le, use so-​called old gra­vel from a tank belo­n­ging to a friend or from anot­her estab­lis­hed aqu­arium. Such gra­vel alre­a­dy con­tains mic­ro­or­ga­nisms that will help the suc­cess­ful deve­lop­ment of your tank. Your aqu­arium will thus estab­lish itself more quick­ly. Gra­vel from a sto­re or from natu­re should be rin­sed in water befo­re use. Gra­vel itself is poor in usab­le nut­rients but ser­ves as a sub­stra­te for the deve­lop­ment of mic­ro­or­ga­nisms. We can sift the gra­vel to the desi­red size. Finer gra­vel is bet­ter for plan­ting. We can also add fer­ti­li­zer, sub­stra­te for plants, such as pie­ces of wood, alder cones, peat, solid com­mer­cial or home­ma­de fer­ti­li­zer, direct­ly into the gra­vel when set­ting up the aqu­arium. All accor­ding to the requ­ire­ments and possi­bi­li­ties of your futu­re aqu­arium. The mini­mum amount of gra­vel requ­ired for a good aqu­arium is 5 cm across the enti­re bot­tom area. Howe­ver, if we want to achie­ve per­fect plant gro­wth, a lay­er of gra­vel 10 cm deep is suitab­le. It all depends on what we want and what resour­ces we have. For a smal­ler aqu­arium, we pro­bab­ly use a lower lay­er of gra­vel than for a lar­ger one. Suita­bi­li­ty also depends on the types of aqu­atic plants we want to grow. Lar­ger plants requ­ire a thic­ker lay­er of gravel.

We can sha­pe the bot­tom; in gene­ral, it’s nicer and more prac­ti­cal to have a hig­her lay­er at the back than at the front. Howe­ver, over time, the gra­vel will start to move,” so we can cre­a­te ter­ra­ces or use other tech­ni­cal solu­ti­ons to fix the sha­pe of the bot­tom. Sand does not belo­ng in the aqu­arium. If we still want to use sand, we should use coarse-​grained sand. Fine sand forms a den­se, com­pact, and poor­ly per­me­ab­le bot­tom. We defi­ni­te­ly want to stock fish and plants in our aqu­arium. Howe­ver, to ensu­re that fish and plants feel good in the aqu­arium and that you like your aqu­arium, it’s neces­sa­ry to use deco­ra­ti­ons and the neces­sa­ry equ­ip­ment. Set­ting up an aqu­arium wit­hout tech­no­lo­gy or with mini­mal tech­no­lo­gy is possib­le, but I don’t recom­mend it for begin­ners. Once you have the gra­vel in the tank, ins­tall the tech­no­lo­gy and deco­ra­ti­on. The tech­no­lo­gy can be cove­red with deco­ra­ti­on, pre­fe­rab­ly also with plants, and it’s good to plan this in advan­ce. Deco­ra­ti­on can inc­lu­de rocks, wood, cera­mic caves, etc. More about this in a sepa­ra­te article.

The equ­ip­ment inc­lu­des, for exam­ple, a fil­ter, hea­ter, air sto­ne, and ther­mo­me­ter. If you use a 3D backg­round, it’s defi­ni­te­ly bet­ter to ins­tall it in an emp­ty tank. Wall­pa­per on the back wall is also easier to app­ly to an emp­ty aqu­arium, alt­hough I am against wall­pa­pers in regu­lar aqu­arium prac­ti­ce. Self-​adhesive film adhe­res very well to a com­ple­te­ly emp­ty aqu­arium, espe­cial­ly if it’s black, and I often stick it to the side walls. Of cour­se, it’s for the back wall. Once you­’ve com­ple­ted the­se steps, let’s pro­ce­ed to fill the tank with water. Cold water is more suitab­le, if avai­lab­le, it’s advi­sab­le to use sea­so­ned water from anot­her aqu­arium, for exam­ple, from anot­her aqu­arist or from an aqu­arium that you­’ve had for some time. This will faci­li­ta­te and spe­ed up the enti­re pro­cess of set­ting up the aqu­arium. After fil­ling the tank with water, turn on the fil­ter and let the water fil­ter for at least a week. Simi­lar­ly, if possib­le, infect the fil­ter mate­rial with water from anot­her aqu­arium. For exam­ple, rin­se the old fil­ter car­trid­ge in water from the aqu­arium and cle­an” the new car­trid­ge in this mur­ky water. This will ino­cu­la­te mic­ro­or­ga­nisms into the new car­trid­ge and spe­ed up the pro­cess of intro­du­cing the filter.

Let’s patien­tly wait with plants and fish for now. After a week, drain one-​third of the water and plant the plants – ide­al­ly fast-​growing spe­cies such as Sagit­ta­ria subu­la­ta, Hyg­rop­hi­la polys­per­ma, and turn on the ligh­ting and aera­ti­on. Aera­ti­on is a very effec­ti­ve tool for supp­res­sing many unfa­vo­rab­le situ­ati­ons. Lea­ve the ligh­ting on for 12 hours a day. Main­tain this sta­te for at least anot­her 5 days. The nit­ro­gen cyc­le takes just over a month. After two weeks from fil­ling the water, the con­cen­tra­ti­on of ammo­nia is hig­hest. If we have neg­lec­ted somet­hing, we may expe­rien­ce ammo­nia spi­kes. Howe­ver, this means that we have made a mis­ta­ke some­whe­re. If we have­n’t plan­ted any plants by then, now is the right time. Also, make sure to turn on aera­ti­on. After three to four weeks, we can add fish. Care­ful­ly moni­tor the­ir beha­vi­or and don’t neg­lect any signs of dise­a­se or poiso­ning. In case of major prob­lems, chan­ge part of the water, add aera­ti­on, and in extre­me cases, remo­ve the fish to dif­fe­rent water, even fresh water.

But how many fish should we keep in our aqu­arium? First of all, I don’t recom­mend overs­toc­king the tank. Con­si­der that fish will grow over time, and they grow throug­hout the­ir lives. Lar­ger fish spe­cies requ­ire dif­fe­rent con­di­ti­ons than smal­ler ones. The situ­ati­on also depends on the tech­no­lo­gy and the spe­ci­fic cha­rac­te­ris­tics of each spe­cies. Rough­ly spe­a­king, we should cal­cu­la­te one liter of water per cen­ti­me­ter of fish body length. Let’s say we have a 1,000-liter aqu­arium. It could con­tain, for exam­ple, 200300 neon tetras, or 50 lar­ger fish spe­cies ran­ging in size from 10 to 20 cm. If you start with too few fish, your fish may show chan­ges in beha­vi­or from the norm, such as gre­at timi­di­ty or even fear. In such cases, it’s good to con­si­der inc­re­a­sing the num­ber of fish with regard to the­ir futu­re size. Cre­a­ting mul­tip­le hiding pla­ces can also help. Your aqu­arium, fish, inha­bi­tants, and tech­no­lo­gy will requ­ire your time and kno­wled­ge, it won’t work wit­hout them. On the other hand, it can show you won­der­ful things and be a nice addi­ti­on to your home. It takes about six months for the aqu­arium to sta­bi­li­ze. The­re may be prob­lems, but don’t let them dis­cou­ra­ge you. Main­tai­ning an aqu­arium is not easy, espe­cial­ly for a begin­ner. An aqu­arium depends on many fac­tors. We just need to try to unders­tand them. Let’s look at it in a way that any poten­tial los­ses resul­ting from our igno­ran­ce or neg­li­gen­ce will come from our own poc­ket. I often hear about pro­ce­du­res that aim for a quick intro­duc­ti­on of fish. It usu­al­ly ends with my obser­va­ti­on: Well, you­’ve poiso­ned tho­se fish.” The quips I taught the fish to swim sign” are not luc­ky for the fish. The aqu­arium requ­ires atten­ti­on from a per­son, and then it will repay them. I wish all aqu­arists suc­cess with the­ir aquariums.


Beim Ein­rich­ten eines Aqu­ariums ist es ide­al, wenn der Aqu­aria­ner zuerst das eigen­tli­che Bec­ken und einen Stän­der besorgt, es mit der not­wen­di­gen Aus­rüs­tung auss­tat­tet und dann erst Was­serpf­lan­zen und Fis­che bes­chafft. Bevor man das Bec­ken für die Fis­che bes­chafft, steht man vor der grund­le­gen­den Fra­ge, wie groß das neue Aqu­arium sein wird. Trotz­dem ist es rat­sam, wenn wir Fis­che hal­ten wol­len, im Voraus zu über­le­gen, wo ihr Lebens­raum sein wird, wie sie exis­tie­ren wer­den. Dies wird Ant­wor­ten auf Fra­gen lie­fern, wie groß das Bec­ken selbst sein wird, ob ein Stän­der erfor­der­lich sein wird, wel­che elek­tris­che Ins­tal­la­ti­on, wel­che Aus­rüs­tung und Werk­ze­uge ver­wen­det wer­den sol­len. Wie rich­tet man ein Aqu­arium ein, damit es nach Ihren Vors­tel­lun­gen funk­ti­oniert? Wenn wir ein neues Bec­ken haben, das gera­de ver­sie­gelt wur­de, emp­feh­le ich, die Fugen vor allem mit Essig zu rei­ni­gen und das gesam­te Bec­ken ansch­lie­ßend mit Was­ser zu spülen. Fül­len Sie den Boden des Bec­kens mit Kies. Der Kies soll­te eher glatt als scharf­kan­tig sein, um zu ver­hin­dern, dass sich die Fis­che ver­let­zen. Der Boden des Aqu­ariums ist sehr wich­tig. Fis­che pro­du­zie­ren Abfall, der haupt­säch­lich von Mik­rof­lo­ra verar­be­i­tet und spä­ter von Pflan­zen auf­ge­nom­men wird. Es ist ide­al, Fluss­kies zu ver­wen­den. Wenn wir mari­nen und kie­sel­sä­u­re­hal­ti­gen Kies ver­wen­den, müs­sen wir uns kei­ne Gedan­ken über die Fre­i­set­zung von Calcium- und Mag­ne­sium­sal­zen ins Was­ser machen, sodass der Kies die Was­ser­här­te nicht erhöht.

Wenn wir Pflan­zen erfolg­re­ich anbau­en wol­len, emp­feh­le ich fei­nen Kies mit einer Par­ti­kelg­röße von 14 mm. Natür­lich haben vers­chie­de­ne Fis­char­ten unters­chied­li­che Anfor­de­run­gen an die Kiesg­röße. Kies kann in einem Zoofach­ges­chäft gekauft oder ander­we­i­tig bes­chafft wer­den. Wenn mög­lich, ver­wen­den Sie so genann­ten alten Kies aus einem Aqu­arium eines Fre­un­des oder aus einem ande­ren etab­lier­ten Aqu­arium. Sol­cher Kies ent­hält bere­its Mik­ro­or­ga­nis­men, die die erfolg­re­i­che Ent­wick­lung Ihres Bec­kens för­dern wer­den. Ihr Aqu­arium wird sich so schnel­ler etab­lie­ren. Kies aus einem Ges­chäft oder aus der Natur soll­te vor Geb­rauch in Was­ser ges­pült wer­den. Kies selbst ist arm an ver­wert­ba­ren Nährs­tof­fen, dient jedoch als Sub­strat für die Ent­wick­lung von Mik­ro­or­ga­nis­men. Wir kön­nen den Kies auf die gewün­sch­te Größe sie­ben. Fei­ner Kies eig­net sich bes­ser zum Pflan­zen. Bei der Ein­rich­tung des Aqu­ariums kön­nen wir auch Dün­ger, Sub­strat für Pflan­zen wie Holzs­tüc­ke, Erlen­kätz­chen, Torf, fes­te kom­mer­ziel­le oder haus­ge­mach­te Dün­ger direkt in den Kies geben. Alles nach den Anfor­de­run­gen und Mög­lich­ke­i­ten Ihres zukünf­ti­gen Aqu­ariums. Die Min­des­tmen­ge an Kies, die ein gutes Aqu­arium benötigt, bet­rägt 5 cm über die gesam­te Boden­flä­che. Wenn wir jedoch ein per­fek­tes Pflan­zen­wachs­tum erre­i­chen wol­len, ist eine Schicht Kies von 10 cm gee­ig­net. Es hängt alles davon ab, was wir wol­len und wel­che Res­sour­cen wir haben. Für ein kle­i­ne­res Aqu­arium ver­wen­den wir wahrs­che­in­lich eine dün­ne­re Kies­chicht als für ein größe­res. Die Eig­nung hängt auch von den Arten von Was­serpf­lan­zen ab, die wir anbau­en möch­ten. Größe­re Pflan­zen benöti­gen eine dic­ke­re Kieschicht.

Wir kön­nen den Boden for­men; im All­ge­me­i­nen ist es schöner und prak­tis­cher, hin­ten eine höhe­re Schicht zu haben als vor­ne. Der Kies wird jedoch im Lau­fe der Zeit wan­dern”, daher kön­nen wir Ter­ras­sen ers­tel­len oder ande­re tech­nis­che Lösun­gen ver­wen­den, um die Form des Bodens zu fixie­ren. Sand gehört nicht ins Aqu­arium. Wenn wir trotz­dem Sand ver­wen­den möch­ten, soll­ten wir grob­kör­ni­gen Sand ver­wen­den. Fei­ner Sand bil­det einen dich­ten, kom­pak­ten und sch­lecht durch­läs­si­gen Boden. Wir wol­len auf jeden Fall Fis­che und Pflan­zen in unse­rem Aqu­arium unterb­rin­gen. Damit sich Fis­che und Pflan­zen im Aqu­arium wohl­füh­len kön­nen und Ihnen das Aqu­arium gefällt, ist es jedoch not­wen­dig, Deko­ra­ti­on und die erfor­der­li­che Tech­nik zu ver­wen­den. Ein Aqu­arium ohne Tech­nik oder mit mini­ma­ler Tech­nik ein­zu­rich­ten ist mög­lich, aber ich emp­feh­le es Anfän­gern nicht. Wenn Sie bere­its Kies im Bec­ken haben, ins­tal­lie­ren Sie die Tech­nik und Deko­ra­ti­on. Die Tech­nik kann mit Deko­ra­ti­on ver­dec­kt wer­den, auch mit Pflan­zen, und es ist rat­sam, dies im Voraus zu beden­ken. Als Deko­ra­ti­on kön­nen Ste­i­ne, Holz, kera­mis­che Höh­len usw. ver­wen­det wer­den. Mehr darüber in einem sepa­ra­ten Artikel.

Zur Tech­nik gehören zum Beis­piel Fil­ter, Hei­zung, Lufts­te­in, Ther­mo­me­ter. Wenn Sie 3D-​Hintergründe ver­wen­den, ist es defi­ni­tiv bes­ser, sie in ein lee­res Bec­ken zu ins­tal­lie­ren. Tape­ten an der Rück­wand las­sen sich eben­falls leich­ter auf ein lee­res Aqu­arium kle­ben, obwohl ich gegen Tape­ten in der her­kömm­li­chen Aqu­aris­tik bin. Selb­s­t­kle­ben­de Folie klebt auf einer kom­plett lee­ren Oberf­lä­che her­vor­ra­gend und ich bevor­zu­ge sch­war­ze und kle­be sie oft auch an die Sei­ten­wän­de. Natür­lich gehört sie an die Rück­wand. Wenn Sie die­se Sch­rit­te abgesch­los­sen haben, fül­len Sie das Bec­ken mit Was­ser. Kal­tes Was­ser ist bes­ser gee­ig­net. Wenn ver­füg­bar, ist es rat­sam, auch ver­wen­de­tes Was­ser aus einem ande­ren Aqu­arium zu ver­wen­den. Zum Beis­piel von einem ande­ren Aqu­aria­ner oder aus einem Aqu­arium, das Sie schon eine Wei­le haben. Der gesam­te Pro­zess der Ein­füh­rung eines Aqu­ariums wird dadurch erle­ich­tert und besch­le­unigt. Nach dem Befül­len des Was­sers schal­ten Sie den Fil­ter ein und las­sen Sie das Was­ser min­des­tens eine Woche fil­tern. Ana­log dazu kön­nen wir die Fil­ter­me­dien mit Was­ser aus einem ande­ren Aqu­arium infi­zie­ren, indem wir beis­piel­swe­i­se den alten Ein­satz im Was­ser aus dem Aqu­arium spülen und den neuen Ein­satz in die­sem trüben Was­ser was­chen”. Dadurch wer­den Mik­ro­or­ga­nis­men in den neuen Ein­satz ein­ge­fügt und der Pro­zess der Fil­te­re­in­füh­rung beschleunigt.

Las­sen Sie uns vorerst gedul­dig auf Pflan­zen und Fis­che war­ten. Nach einer Woche las­sen wir ein Drit­tel des Was­sers ab und pflan­zen Pflan­zen ein – ide­a­ler­we­i­se schnell wach­sen­de Arten wie Sagit­ta­ria subu­la­ta, Hyg­rop­hi­la polys­per­ma – und schal­ten Sie das Licht und die Belüf­tung ein. Belüf­tung ist ein sehr effek­ti­ves Mit­tel zur Unterd­rüc­kung vie­ler ungüns­ti­ger Situ­ati­onen. Las­sen Sie das Licht 12 Stun­den am Tag ein­ges­chal­tet. Behal­ten Sie die­sen Zus­tand min­des­tens wei­te­re 5 Tage bei. Der Sticks­toffk­re­is­lauf dau­ert etwas mehr als einen Monat. Nach zwei Wochen nach dem Befül­len des Was­sers ist die Ammo­niak­kon­zen­tra­ti­on am höchs­ten. Wenn wir etwas ver­nach­läs­sigt haben, kann es sein, dass wir Ammo­niaks­pit­zen erle­ben. Das bede­utet jedoch, dass wir irgen­dwo einen Feh­ler gemacht haben. Wenn wir bis dahin noch kei­ne Pflan­zen gepf­lanzt haben, ist jetzt der rich­ti­ge Zeit­punkt. Stel­len Sie außer­dem sicher, dass die Belüf­tung ein­ges­chal­tet ist. Nach drei bis vier Wochen kön­nen wir Fis­che ein­set­zen. Über­wa­chen Sie ihr Ver­hal­ten sorg­fäl­tig und ver­nach­läs­si­gen Sie kei­ne Anze­i­chen von Kran­khe­it oder Ver­gif­tung. Im Fal­le größe­rer Prob­le­me wech­seln Sie einen Teil des Was­sers, fügen Sie Belüf­tung hin­zu, und ent­fer­nen Sie im Extrem­fall die Fis­che in ein ande­res Was­ser, viel­le­icht sogar in fris­ches Wasser.

Aber wie vie­le Fis­che soll­ten wir in unse­rem Aqu­arium hal­ten? Zunächst ein­mal emp­feh­le ich, das Aqu­arium nicht zu über­be­set­zen. Beden­ken Sie, dass die Fis­che im Lau­fe der Zeit wach­sen und ihr gan­zes Leben lang wach­sen. Größe­re Fis­char­ten haben ande­re Anfor­de­run­gen als kle­i­ne­re. Die Situ­ati­on hängt auch von der Tech­no­lo­gie und den spe­zi­fis­chen Merk­ma­len jeder Art ab. Grob gesagt soll­ten wir pro Zen­ti­me­ter Fisch­kör­per­län­ge einen Liter Was­ser berech­nen. Neh­men wir an, wir haben ein 1.000-Liter-Aquarium. Es könn­te zum Beis­piel 200300 Neons oder 50 größe­re Fis­char­ten in Größen von 10 bis 20 cm ent­hal­ten. Wenn Sie mit zu weni­gen Fis­chen begin­nen, kön­nen Ihre Fis­che Ver­hal­ten­sän­de­run­gen von der Norm zei­gen, wie gro­ße Schüch­tern­he­it oder sogar Angst. In sol­chen Fäl­len ist es rat­sam, die Anzahl der Fis­che im Hinb­lick auf ihre zukünf­ti­ge Größe zu erhöhen. Das Schaf­fen meh­re­rer Vers­tec­ke kann eben­falls hilf­re­ich sein. Ihr Aqu­arium, Ihre Fis­che, die Ein­rich­tung und die Tech­nik erfor­dern Zeit und Wis­sen von Ihnen; ohne die­se wird es nicht funk­ti­onie­ren. Auf der ande­ren Sei­te kann es Ihnen wun­ders­chöne Din­ge zei­gen und eine schöne Ergän­zung zu Ihrem Zuhau­se sein. Es dau­ert etwa ein hal­bes Jahr, bis sich das Aqu­arium ein­ge­fah­ren hat. Es kön­nen Prob­le­me auft­re­ten, aber las­sen Sie sich davon nicht absch­rec­ken. Ein Aqu­arium zu pfle­gen ist nicht ein­fach, beson­ders für Anfän­ger. Ein Aqu­arium hängt von vie­len Fak­to­ren ab. Wir müs­sen ver­su­chen, sie zu vers­te­hen. Bet­rach­ten wir es so, dass mög­li­che Ver­lus­te, die durch unse­re Unkenn­tnis oder Leicht­fer­tig­ke­it verur­sacht wer­den kön­nen, aus unse­rer eige­nen Tas­che kom­men. Oft höre ich von Ver­fah­ren, die darauf abzie­len, Fis­che schnell ein­zu­set­zen. Nor­ma­ler­we­i­se endet dies mit mei­ner Fests­tel­lung: Aber Sie haben die Fis­che ver­gif­tet.” Die Anek­do­ten ich habe die Fis­che das Sch­wim­men gele­hrt” sind für die Fis­che nicht glück­lich. Ein Aqu­arium erfor­dert, dass man sich ihm wid­met, und es wird sich dann revan­chie­ren. Ich wün­sche allen Aqu­aria­nern viel Erfolg mit ihren Aquarien.

Use Facebook to Comment on this Post

Akvaristika, Biológia

Chemické procesy v akváriu

Hits: 20915

Ché­mie sa netre­ba báť, má svo­je pev­né záko­ni­tos­ti, ale bez jej aspoň malých vedo­mos­tí sa dá len veľ­mi ťaž­ko zaobísť pri úspeš­nom cho­ve, ale­bo pes­to­va­ní rast­lín. Bio­lo­gic­ké pro­ce­sy úzko súvi­sia aj s fyzi­kál­ny­mi zákon­mi. V prí­ro­de sa len veľ­mi málo látok v kva­pal­nom ale­bo plyn­nom sta­ve nachá­dza v stá­lom, neut­rál­nom sta­ve. Drvi­vá väč­ši­na látok je diso­ci­ova­ná na ióny. Schop­nosť via­zať sa na lát­ky, prv­ky je špe­ci­fic­ká, závi­sí od množ­stva che­mic­kých, ale aj fyzi­kál­nych fak­to­rov. Aj samot­ná voda sa vyzna­ču­je ioni­zá­ci­ou – veď kaž­dý z nás vie, že je vodi­čom elek­tric­ké­ho prú­du. O pH počul asi kaž­dý akva­ris­ta. Čo popi­su­je pH? Roz­diel­nu kon­cen­trá­ciu che­mic­ky čis­tých zlo­žiek vody – jed­not­li­vých zlo­žiek” tvo­ria­cich vodu. Voda posky­tu­je mož­nos­ti pre množ­stvo che­mic­kých reak­cií. Pre tie­to reak­cie je mož­né opí­sať rov­no­váž­ne kon­štan­ty. Nie je to nič nenor­mál­ne, nič ťaž­ko pocho­pi­teľ­né. Keď pou­ži­jem ana­ló­giu, je to pres­ne ako medzi ľuď­mi, aj tam exis­tu­je medzi nami urči­tá rov­no­vá­ha, urči­té napä­tie (tlak), kto­ré sa raz pri­klo­ní na jed­nu stra­nu, ino­ke­dy na opač­nú. A k pod­mien­kam, kto­ré urču­jú ten­to stav rov­na­ko pat­rí aj taká malič­kosť, ako odkiaľ fúka vie­tor”. Spo­meň­me si na osmó­zu, ale aj na to, čo sa sta­ne, keď uvoľ­ní­me ven­til na pneuma­ti­ke – časom sa vyrov­ná tlak. Che­mic­ká väz­ba je kreh­ká vec, podob­ne ako vzťa­hy medzi ľuď­mi. Aj medzi nami exis­tu­jú kata­ly­zá­to­ry, enzý­my podob­ne ako sa popi­su­jú v ché­mii a bio­ló­gii, kto­ré dovo­ľu­jú usku­toč­niť neja­ký pro­ces, neja­kú reak­ciu. Samoz­rej­me aj spo­ma­ľo­va­če – inhi­bí­to­ry.

Prí­ro­da má jed­not­ný základ, Aris­to­te­les ju chá­pe ako vznik, pod­sta­tu a vývoj vecí, a ja to vidím rov­na­ko. Ak sa k tomu posta­ví­me spo­loč­ne, máme väč­šiu šan­cu poro­zu­mieť aj akva­ris­ti­ke. Pocho­pe­nie súvis­los­tí rôz­nych ved­ných odbo­rov popi­su­je ter­mín kon­zi­lien­cia. Základ­ným sta­veb­ným prv­kov živých sústav je uhlík. Uhlík pat­rí spo­lu s vodí­kom, kys­lí­kom, dusí­kom, fos­fo­rom, sírou ku bio­gén­nym prv­kom. Ché­mia uhlí­ka tvo­rí samos­tat­ne sto­ja­cu dis­cip­lí­nu – orga­nic­kú ché­miu (neza­obe­rá sa len oxid­mi uhlí­ka). Uhlík tvo­rí naj­väč­šiu časť suši­ny rýb, rast­lín, aj mik­ro­or­ga­niz­mov. Asi kaž­dý z vás sa v živo­te stre­tol s poj­mom foto­syn­té­za. Aj táto reak­cia, kto­rá aj nám, ľuďom dovo­ľu­je exis­to­vať, sa točí oko­lo uhlí­ka. V akvá­riu sa uhlík vysky­tu­je naj­mä vo for­me oxi­du uhli­či­té­ho, uhli­či­ta­nov, hyd­ro­ge­nuh­li­či­ta­nov a kyse­li­ny uhli­či­tej. V akom pome­re závi­sí naj­mä od pH. Uhlík sa nachá­dza aj vo for­me biel­ko­vín v potra­ve, v dre­ve kde postup­ným roz­kla­dom dochá­dza ku štie­pe­niu biel­ko­vín na ami­no­ky­se­li­ny a násled­ne ku nit­ri­fi­ká­cii a denit­ri­fi­ká­cii, čo posú­va pH sme­rom dole – pro­stre­die sa okys­ľu­je. V denit­ri­fi­ká­cii nit­ri­fi­ká­cii hrá naj­dô­le­ži­tej­šiu úlo­hu dusík. V akvá­riu dochá­dza najprv ku nit­ri­fi­ká­cii. Najprv oxi­du­je amo­niak na dusi­ta­ny a dusič­na­ny pôso­be­ním nit­ri­fi­kač­ných bak­té­rií Nit­ro­so­mo­nas. Ako nám už naho­vá­ra pred­chá­dza­jú­ca veta, ten­to pro­ces je aerób­ny (za prí­stu­pu vzdu­chu). V ana­e­rób­nych pod­mien­kach dochá­dza k opač­né­mu pro­ce­su (redukč­né­mu) – ku denit­ri­fi­ká­cii. Dochá­dza ku reduk­cii zlú­če­nín dusí­ka na oxi­dy dusí­ka – N2O, NO, prí­pad­ne na až N2 pri pH vyš­šom ako 6 pôso­be­ním bak­té­rií Nit­ro­bac­ter. Keď­že ide o ply­ny, denit­ri­fi­ká­cia doká­že odstrá­niť z vody (akvá­ria) zlú­če­ni­ny dusí­ka. Tie­to pro­ce­sy sú pre akva­ris­ti­ku veľ­mi dôle­ži­té a v zása­de pozi­tív­ne naklo­ne­né. Toxi­ci­ta pro­duk­tov látok cyk­lu dusí­ka kle­sá v tom­to rade: NH3NO2NO3. Vyš­ší obsah dusič­na­nov nezná­ša­jú nie­kto­ré cit­li­vej­šie dru­hy – napr. ame­ric­ké Apis­to­gram­my. Toxi­ci­ta amo­nia­ku je vyš­šia pri vyš­šom pH. Viac amo­nia­ku sa nachá­dza vo vode s vyš­ším pH a vyš­šou tep­lo­tou.

Dusík pochá­dza zo štie­pe­nia biel­ko­vín, kto­ré dodá­va­me potra­vou. Najprv sa tvo­ria ami­no­ky­se­li­ny, neskôr amo­niak. Dusič­na­ny je mož­né účin­ne eli­mi­no­vať rast­li­na­mi, prí­pad­ne reverz­nou osmó­zou v zdro­jo­vej vode , ale­bo selek­tív­ny­mi ion­to­me­nič­mi. Fos­fo­reč­na­ny ( PO4) a ťaž­ké kovy ako napr. olo­vo, zinok sú takis­to toxic­ké. Nie­kto­ré kovy sú v sto­po­vom množ­stve žia­du­ce, ale vo vyš­šej kon­cen­trá­cií pôso­bia ako jedy. V prí­pa­de, že pri roz­kla­de hmo­ty je kys­lí­ko­vý defi­cit, pro­duk­ty hni­tia sú metán ( CH4), amo­niak, sul­fán ( H2S), kyse­li­na mlieč­na. Dru­hy nezná­ša­jú­ce prí­liš mäk­kú vodu čas­to trpia na vod­na­teľ­nosť. To je spô­so­be­né osmo­tic­kým tla­kom – z ich tela sa soli vypla­vu­jú a viac čis­tej vody pre­ni­ká do ich tela ako je únos­né. Oxid uhli­či­tý je nevy­hnut­ná anor­ga­nic­ká lát­ka, kto­rá však pri vyso­kej kon­cen­trá­cii pôso­bí ako nar­ko­ti­kum a ryby dusí. Nie­ke­dy sa tie­to účin­ky dajú využiť. Ak chce­me napr. ryby humán­ne usmr­tiť, sta­čí na to mine­rál­ka – tá by mala obsa­ho­vať viac ako 5% roz­pus­te­né­ho CO2. Medzi uhli­či­ta­no­vou tvrdo­s­ťou, pHoxi­dom uhli­či­tým je závis­losť. Obsah CO2 je nepria­mo úmer­ný ku pH a tep­lo­te a pria­mo úmer­ný ku uhli­či­ta­no­vej tvrdosti.


Che­mis­try should­n’t be fea­red; it has its solid laws, but wit­hout at least some kno­wled­ge of it, it’s very dif­fi­cult to suc­ce­ed in fish­ke­e­ping or plant cul­ti­va­ti­on. Bio­lo­gi­cal pro­ces­ses are clo­se­ly rela­ted to phy­si­cal laws as well. In natu­re, very few sub­stan­ces are found in a liqu­id or gase­ous sta­te in a stab­le, neut­ral sta­te. The vast majo­ri­ty of sub­stan­ces are dis­so­cia­ted into ions. The abi­li­ty to bind to sub­stan­ces, ele­ments, is spe­ci­fic and depends on many che­mi­cal and phy­si­cal fac­tors. Water itself is cha­rac­te­ri­zed by ioni­za­ti­on – as we all know, it con­ducts elect­ric cur­rent. Almost eve­ry aqu­arist has heard of pH. What does pH desc­ri­be? The dif­fe­ren­tial con­cen­tra­ti­on of che­mi­cal­ly pure com­po­nents in water – the indi­vi­du­al com­po­nents” that make up water. Water pro­vi­des oppor­tu­ni­ties for many che­mi­cal reac­ti­ons. Equ­ilib­rium cons­tants can desc­ri­be the­se reac­ti­ons. It’s not­hing abnor­mal, not­hing dif­fi­cult to unders­tand. Using an ana­lo­gy, it’s exact­ly like among peop­le; the­re­’s a cer­tain balan­ce among us, a cer­tain ten­si­on (pre­ssu­re) that some­ti­mes tilts to one side, some­ti­mes to the other. And the con­di­ti­ons that deter­mi­ne this sta­te inc­lu­de even such a tri­via­li­ty as whe­re the wind blo­ws from”. Let’s remem­ber osmo­sis, but also what hap­pens when we rele­a­se air from a tire val­ve – pre­ssu­re is equ­ali­zed over time. Che­mi­cal bon­ding is a fra­gi­le thing, just like rela­ti­ons­hips bet­we­en peop­le. Among us, the­re are cata­lysts, enzy­mes, as desc­ri­bed in che­mis­try and bio­lo­gy, which allow for some pro­cess, some reac­ti­on to take pla­ce. Of cour­se, the­re are also retar­dants – inhibitors.

Natu­re has a uni­fied foun­da­ti­on; Aris­tot­le unders­tands it as the ori­gin, essen­ce, and deve­lop­ment of things, and I see it the same way. If we app­ro­ach it toget­her, we have a gre­a­ter chan­ce of unders­tan­ding aqu­atics as well. Unders­tan­ding the con­nec­ti­ons bet­we­en dif­fe­rent scien­ti­fic dis­cip­li­nes is desc­ri­bed by the term con­ci­lien­ce. The basic buil­ding block of living sys­tems is car­bon. Car­bon, along with hyd­ro­gen, oxy­gen, nit­ro­gen, phosp­ho­rus, and sul­fur, belo­ngs to the bio­ge­nic ele­ments. Car­bon che­mis­try forms a sepa­ra­te dis­cip­li­ne – orga­nic che­mis­try (it’s not just about car­bon oxi­des). Car­bon cons­ti­tu­tes the lar­gest part of the dry mat­ter of fish, plants, and mic­ro­or­ga­nisms. Almost eve­ry­o­ne has encoun­te­red the con­cept of pho­to­synt­he­sis in life. Even this reac­ti­on, which allo­ws us humans to exist, revol­ves around car­bon. In the aqu­arium, car­bon occurs main­ly in the form of car­bon dioxi­de, car­bo­na­tes, bicar­bo­na­tes, and car­bo­nic acid. The ratio depends main­ly on pH. Car­bon is also found in the form of pro­te­ins in food, in wood whe­re gra­du­al decom­po­si­ti­on leads to the cle­a­va­ge of pro­te­ins into ami­no acids and sub­se­qu­en­tly to nit­ri­fi­ca­ti­on and denit­ri­fi­ca­ti­on, which lowers the pH – the envi­ron­ment beco­mes more aci­dic. Nit­ro­gen pla­ys the most impor­tant role in denit­ri­fi­ca­ti­on and nit­ri­fi­ca­ti­on. Nit­ri­fi­ca­ti­on occurs first in the aqu­arium. Ammo­nia is first oxi­di­zed to nit­ri­tes and nit­ra­tes by the acti­on of nit­ri­fy­ing bac­te­ria Nit­ro­so­mo­nas. As the pre­vi­ous sen­ten­ce sug­gests, this pro­cess is aero­bic (with access to air). Under ana­e­ro­bic con­di­ti­ons, the oppo­si­te (reduc­ti­ve) pro­cess occurs – denit­ri­fi­ca­ti­on. Com­pounds of nit­ro­gen are redu­ced to nit­ro­gen oxi­des – N2O, NO, or even to N2 at pH hig­her than 6 by the acti­on of Nit­ro­bac­ter bac­te­ria. Sin­ce the­se are gases, denit­ri­fi­ca­ti­on can remo­ve nit­ro­gen com­pounds from the water (aqu­arium). The­se pro­ces­ses are very impor­tant for aqu­aris­tics and are fun­da­men­tal­ly posi­ti­ve. The toxi­ci­ty of nit­ro­gen cyc­le pro­ducts dec­re­a­ses in this order: NH3NO2NO3. Some more sen­si­ti­ve spe­cies do not tole­ra­te hig­her levels of nit­ra­tes – for exam­ple, Ame­ri­can Apis­to­gram­mas. The toxi­ci­ty of ammo­nia is hig­her at hig­her pH. More ammo­nia is found in water with hig­her pH and temperature.

Nit­ro­gen comes from the bre­ak­do­wn of pro­te­ins pro­vi­ded by food. First, ami­no acids are for­med, later ammo­nia. Nit­ra­tes can be effec­ti­ve­ly eli­mi­na­ted by plants, rever­se osmo­sis in sour­ce water, or selec­ti­ve ion exchan­gers. Phosp­ha­tes (PO4) and hea­vy metals such as lead, zinc are also toxic. Some metals are desi­rab­le in tra­ce amounts but act as poisons in hig­her con­cen­tra­ti­ons. If the­re is an oxy­gen defi­cit during the decom­po­si­ti­on of mat­ter, the pro­ducts of rot­ting are met­ha­ne (CH4), ammo­nia, hyd­ro­gen sul­fi­de (H2S), lac­tic acid. Spe­cies not tole­ra­ting very soft water often suf­fer from flab­bi­ness. This is due to osmo­tic pre­ssu­re – salts are flus­hed out of the­ir bodies, and more pure water penet­ra­tes the­ir bodies than is tole­rab­le. Car­bon dioxi­de is a neces­sa­ry inor­ga­nic sub­stan­ce, but at high con­cen­tra­ti­ons, it acts as a nar­co­tic and suf­fo­ca­tes fish. Some­ti­mes the­se effects can be uti­li­zed. If, for exam­ple, we want to huma­ne­ly eut­ha­ni­ze fish, mine­ral water is suf­fi­cient – it should con­tain more than 5% dis­sol­ved CO2. The­re is a depen­den­ce bet­we­en car­bo­na­te hard­ness, pH, and car­bon dioxi­de. The con­tent of CO2 is inver­se­ly pro­por­ti­onal to pH and tem­pe­ra­tu­re and direct­ly pro­por­ti­onal to car­bo­na­te hardness.


Che­mie soll­te nicht gefürch­tet wer­den; sie hat ihre fes­ten Geset­ze, aber ohne zumin­dest etwas Wis­sen darüber ist es sehr sch­wer, beim erfolg­re­i­chen Fisch­hal­ten oder der Pflan­zen­zucht aus­zu­kom­men. Bio­lo­gis­che Pro­zes­se sind auch eng mit phy­si­ka­lis­chen Geset­zen ver­bun­den. In der Natur sind nur sehr weni­ge Sub­stan­zen in einem flüs­si­gen oder gas­för­mi­gen Zus­tand in einem sta­bi­len, neut­ra­len Zus­tand zu fin­den. Der über­wie­gen­de Teil der Sub­stan­zen ist in Ionen dis­so­zi­iert. Die Fähig­ke­it, sich an Sub­stan­zen und Ele­men­te zu bin­den, ist spe­zi­fisch und hängt von vie­len che­mis­chen und phy­si­ka­lis­chen Fak­to­ren ab. Was­ser selbst zeich­net sich durch Ioni­sie­rung aus – wie wir alle wis­sen, lei­tet es elek­tris­chen Strom. Fast jeder Aqu­aria­ner hat von pH gehört. Was besch­re­ibt der pH-​Wert? Die dif­fe­ren­tiel­le Kon­zen­tra­ti­on che­misch rei­ner Kom­po­nen­ten im Was­ser – die ein­zel­nen Kom­po­nen­ten”, die das Was­ser bil­den. Was­ser bie­tet Mög­lich­ke­i­ten für vie­le che­mis­che Reak­ti­onen. Gle­ich­ge­wicht­skons­tan­ten kön­nen die­se Reak­ti­onen besch­re­i­ben. Es ist nichts Abnor­ma­les, nichts Sch­wie­ri­ges zu vers­te­hen. Mit einer Ana­lo­gie ist es genau wie unter Men­schen; es gibt ein bes­timm­tes Gle­ich­ge­wicht zwis­chen uns, eine bes­timm­te Span­nung (Druck), die manch­mal auf die eine, manch­mal auf die ande­re Sei­te kippt. Und die Bedin­gun­gen, die die­sen Zus­tand bes­tim­men, umfas­sen selbst Kle­i­nig­ke­i­ten wie woher der Wind weht”. Den­ken wir an die Osmo­se, aber auch daran, was pas­siert, wenn wir Luft aus einem Rei­fen­ven­til ablas­sen – der Druck wird im Lau­fe der Zeit aus­geg­li­chen. Die che­mis­che Bin­dung ist eine fra­gi­le Sache, genau wie Bez­ie­hun­gen zwis­chen Men­schen. Unter uns gibt es Kata­ly­sa­to­ren, Enzy­me, wie sie in der Che­mie und Bio­lo­gie besch­rie­ben wer­den, die es ermög­li­chen, einen bes­timm­ten Pro­zess, eine bes­timm­te Reak­ti­on dur­ch­zu­füh­ren. Natür­lich gibt es auch Ver­zöge­rer – Inhibitoren.

Die Natur hat eine ein­he­it­li­che Grund­la­ge; Aris­to­te­les vers­teht sie als den Urs­prung, die Essenz und die Ent­wick­lung der Din­ge, und ich sehe das genau­so. Wenn wir uns geme­in­sam damit ause­i­nan­der­set­zen, haben wir eine größe­re Chan­ce, auch die Aqu­aris­tik zu vers­te­hen. Das Vers­tänd­nis der Zusam­men­hän­ge zwis­chen vers­chie­de­nen wis­sen­schaft­li­chen Dis­zip­li­nen wird durch den Beg­riff Kon­zi­lienz besch­rie­ben. Der grund­le­gen­de Baus­te­in leben­der Sys­te­me ist Koh­lens­toff. Koh­lens­toff gehört zusam­men mit Was­sers­toff, Sau­ers­toff, Sticks­toff, Phosp­hor und Sch­we­fel zu den bio­ge­nen Ele­men­ten. Die Koh­lens­toff­che­mie bil­det eine eigens­tän­di­ge Dis­zip­lin – die orga­nis­che Che­mie (es geht nicht nur um Koh­lens­tof­fo­xi­de). Koh­lens­toff macht den größten Teil der Troc­ken­mas­se von Fis­chen, Pflan­zen und Mik­ro­or­ga­nis­men aus. Fast jeder ist im Leben auf den Beg­riff Pho­to­synt­he­se ges­to­ßen. Auch die­se Reak­ti­on, die es uns Men­schen ermög­licht zu exis­tie­ren, dreht sich um Koh­lens­toff. Im Aqu­arium kommt Koh­lens­toff haupt­säch­lich in Form von Koh­len­di­oxid, Car­bo­na­ten, Bicar­bo­na­ten und Koh­len­sä­u­re vor. Das Ver­hält­nis hängt haupt­säch­lich vom pH-​Wert ab. Koh­lens­toff kommt auch in Form von Pro­te­i­nen in der Nahrung, im Holz vor, wo der all­mäh­li­che Zer­fall zur Spal­tung von Pro­te­i­nen in Ami­no­sä­u­ren und ansch­lie­ßend zur Nit­ri­fi­ka­ti­on und Denit­ri­fi­ka­ti­on führt, was den pH-​Wert senkt – die Umge­bung wird sau­rer. Sticks­toff spielt bei der Denit­ri­fi­ka­ti­on und Nit­ri­fi­ka­ti­on die wich­tigs­te Rol­le. Zuerst erfolgt in den Aqu­arien die Nit­ri­fi­ka­ti­on. Ammo­niak wird zunächst durch die Wir­kung von Nit­ri­fi­zie­rungs­bak­te­rien Nit­ro­so­mo­nas zu Nit­ri­ten und Nit­ra­ten oxi­diert. Wie der vor­he­ri­ge Satz nahe­legt, ist die­ser Pro­zess aerob (mit Zugang zu Luft). Unter ana­e­ro­ben Bedin­gun­gen tritt der umge­ke­hr­te (reduk­ti­ve) Pro­zess auf – die Denit­ri­fi­ka­ti­on. Sticks­toff­ver­bin­dun­gen wer­den zu Stic­ko­xi­den – N2O, NO oder sogar zu N2 bei einem pH-​Wert über 6 durch die Wir­kung von Nitrobacter-​Bakterien redu­ziert. Da es sich um Gase han­delt, kann die Denit­ri­fi­ka­ti­on Sticks­toff­ver­bin­dun­gen aus dem Was­ser (Aqu­arium) ent­fer­nen. Die­se Pro­zes­se sind für die Aqu­aris­tik sehr wich­tig und im Grun­de genom­men posi­tiv. Die Toxi­zi­tät der Pro­duk­te des Sticks­toffk­re­is­laufs nimmt in die­ser Rei­hen­fol­ge ab: NH3NO2NO3. Eini­ge emp­find­li­che­re Arten ver­tra­gen kei­ne höhe­ren Nit­rat­wer­te – zum Beis­piel ame­ri­ka­nis­che Apis­to­gram­mas. Die Toxi­zi­tät von Ammo­niak ist bei höhe­rem pH-​Wert höher. Mehr Ammo­niak wird in Was­ser mit höhe­rem pH-​Wert und Tem­pe­ra­tur gefunden.

Sticks­toff stammt aus dem Abbau von Pro­te­i­nen, die mit der Nahrung gelie­fert wer­den. Zuerst wer­den Ami­no­sä­u­ren gebil­det, spä­ter Ammo­niak. Nit­ra­te kön­nen effek­tiv von Pflan­zen, durch Umkeh­ros­mo­se im Aus­gang­swas­ser oder durch selek­ti­ve Ione­naus­taus­cher eli­mi­niert wer­den. Phosp­ha­te (PO4) und Sch­wer­me­tal­le wie Blei, Zink sind eben­falls gif­tig. Eini­ge Metal­le sind in Spu­ren­men­ge erwün­scht, wir­ken aber in höhe­ren Kon­zen­tra­ti­onen als Gif­te. Wenn es bei der Zer­set­zung von Mate­rie an Sau­ers­toff man­gelt, sind die Pro­duk­te der Fäul­nis Met­han (CH4), Ammo­niak, Was­sers­toff­sul­fid (H2S), Milch­sä­u­re. Arten, die kein sehr wei­ches Was­ser ver­tra­gen, lei­den oft unter Sch­laff­he­it. Dies ist auf den osmo­tis­chen Druck zurück­zu­füh­ren – Sal­ze wer­den aus ihren Kör­pern aus­ges­pült, und mehr rei­nes Was­ser dringt in ihre Kör­per ein, als tole­rier­bar ist. Koh­len­di­oxid ist eine not­wen­di­ge anor­ga­nis­che Sub­stanz, wir­kt aber in hohen Kon­zen­tra­ti­onen als Nar­ko­ti­kum und ers­tic­kt Fis­che. Manch­mal kön­nen die­se Effek­te genutzt wer­den. Wenn wir zum Beis­piel Fis­che auf huma­ne Wei­se töten wol­len, reicht Mine­ra­lwas­ser aus – es soll­te mehr als 5% gelös­tes CO2 ent­hal­ten. Es gibt eine Abhän­gig­ke­it zwis­chen Kar­bo­nat­här­te, pH-​Wert und Koh­len­di­oxid. Der Gehalt an CO2 ist indi­rekt pro­por­ti­onal zum pH-​Wert und zur Tem­pe­ra­tur und direkt pro­por­ti­onal zur Karbonathärte.

Use Facebook to Comment on this Post

Akvaristika, Biológia, Výživa

Nitenky – najznámejšie živé krmivo medzi širokou verejnosťou

Hits: 12615

Niten­ky - Tubi­fex tubi­fex sa v minu­los­ti pomer­ne hoj­ne vysky­to­va­li v oblas­tiach, kde bol vypúš­ťa­ný odpad – orga­nic­ké zne­čis­te­nie do vod­ných tokov – v blíz­kos­ti pivo­va­rov, sla­dov­ní, sódov­kár­ni, celu­ló­zok, prie­my­sel­ných pod­ni­kov. Žijú v bah­ne pomal­šie tečú­cich, resp. pokoj­nej­ších tokov. V tokoch sú zavŕ­ta­né do bah­na, vedia sa veľ­mi ostra­ži­to vtiah­nuť hlbo­ko do dna. Tubi­fex sa dá nájsť tak­mer v kaž­dom toku u nás, ale nie v množ­stve, kto­ré je pre akva­ris­tu zau­jí­ma­vé. Dnes už je voda čas­to pred­tým trans­for­mo­va­ná v čis­tič­kách, odpa­du je menej, živi­ny chý­ba­jú. Niten­ky ako ich pozna­jú akva­ris­ti majú hne­do­čer­ve­nú far­bu. V prí­ro­de je ich far­ba varia­bil­ná a závi­sí od množ­stva kys­lí­ka vo vode. Niten­ky v prí­ro­de môžu byť aj bie­lej farby.

Skr­mo­va­nie niteniek

Niten­ky sú veľ­mi vhod­ná potra­va napr. pre sum­co­vi­té ryby, pan­cier­ni­ky, prí­sav­ní­ky, sum­če­ky. Vo svo­jich čre­vách im kolu­je bah­no ešte dlho po ich odlo­ve­ní. Pre­to sa musia riad­ne pre­mý­vať a po nalo­ve­ní nechať aspoň tri dni vytrá­viť. Sú veľ­mi závis­lé od čerstvej vody, ove­ľa viac ako živé patent­ky, pre­to sa musia čas­to pre­pla­cho­vať vodou, prí­pad­ne sa pre ne nechá­va neus­tá­ly prí­tok a odtok vody. Vhod­né je ucho­vá­vať ich napr. v plo­chých mis­kách napr. na spod­ku chlad­nič­ky. Doká­žu sa zavŕ­tať do dna, kde môžu buď hniť, ale­bo sa nie­ke­dy môže stať, že sa po čase maso­vej­šie vyro­ja. Ak si zože­nie­te živé niten­ky, odpo­rú­čam hneď časť skŕ­miť a zvy­šok sami zamraz­te. Nemu­sí­te sa báť. Ak si ich zamra­zí­te samy, zosta­nú v sta­ve akcep­to­va­teľ­nom. Ide o to, že som nepo­čul ešte o mra­ze­ných niten­kách z obcho­du, kto­ré by nevy­ze­ra­li po rozm­ra­ze­ní skôr ako bla­to :-(.

Lov nite­niek

Niten­ky sa chy­ta­jú tak, že sa podo­be­rie celý sub­strát, na kto­rom ich vidí­me, pre­to­že sa veľ­mi rých­lo bojaz­li­vo vťa­hu­jú do sub­strá­tu. Z neho ich dosta­ne­me tak, že navrch nasy­pe­me čis­tý pie­sok. Niten­ky postup­ne pre­le­zú nad pie­sok, z kto­ré­ho ich už ľah­šie dosta­ne­me. Iný spô­sob (Neubau­er in verb, 2009): nalo­ve­ný mate­riál dáme napr. do níz­kej nádo­by, napr. do pre­prav­ky na zákus­ky. Maxi­mál­ne 5 – 7 cm vrstvu. Zakry­je­me ich sta­rou zác­lo­nou, nale­je­me vlaž­nú vodu aby bola asi dva cm nad sub­strát. Nechá­me ich v tma­vej miest­nos­ti s izbo­vou tep­lo­tou. Niten­ky sa začnú dusiť a zhru­ba za hodi­nu – dve začnú pre­lie­zať cez zác­lo­nu. Zo zác­lo­ny ich ľah­ko vez­me­me hus­tým hre­be­ňom na vlasy.


Niten­ky – Tubi­fex tubi­fex used to be quite abun­dant in are­as whe­re was­te was dis­char­ged – orga­nic pol­lu­ti­on into water­cour­ses – near bre­we­ries, mal­tings, soda fac­to­ries, pulp mills, indus­trial plants. They live in mud in slo­wer flo­wing or calm stre­ams. In stre­ams, they bur­row into the mud and can very cau­ti­ous­ly bur­row deep into the bot­tom. Tubi­fex can be found in almost eve­ry stre­am in our coun­try, but not in quan­ti­ties that are inte­res­ting for aqu­arists. Today, the water is often trans­for­med in tre­at­ment plants, the­re is less was­te, and nut­rients are lac­king. Niten­ky as aqu­arists know them have a brown-​red color. In natu­re, the­ir color is variab­le and depends on the amount of oxy­gen in the water. Niten­ky in natu­re can also be white.

Fee­ding Tubifex

Tubi­fex are very suitab­le food, for exam­ple, for cat­fish, loaches, suc­ker­fish, and small cat­fish. Mud still cir­cu­la­tes in the­ir intes­ti­nes long after they are caught. The­re­fo­re, they must be tho­rough­ly rin­sed and allo­wed to digest for at least three days after cat­ching. They are very depen­dent on fresh water, much more so than live Tubi­fex, so they must be rin­sed fre­qu­en­tly with water, or a cons­tant flow and drai­na­ge of water are pro­vi­ded for them. It is suitab­le to keep them, for exam­ple, in shal­low bowls, for exam­ple, at the bot­tom of the ref­ri­ge­ra­tor. They can bur­row into the bot­tom, whe­re they can eit­her rot or some­ti­mes it may hap­pen that they mass spa­wn after a whi­le. If you get live Tubi­fex, I recom­mend fee­ding part of them imme­dia­te­ly and fre­e­zing the rest your­self. You don’t have to wor­ry. If you fre­e­ze them your­self, they will remain in an accep­tab­le con­di­ti­on. The point is that I have not heard of fro­zen Tubi­fex from a sto­re that did­n’t look like mud after thawing :-(.

Cat­ching Tubifex

Tubi­fex are caught by taking the enti­re sub­stra­te on which we see them, becau­se they quick­ly and cau­ti­ous­ly bur­row into the sub­stra­te. We can get them out by sprink­ling cle­an sand on top. Tubi­fex will gra­du­al­ly cra­wl over the sand, making them easier to remo­ve. Anot­her met­hod (Neubau­er in verb, 2009): put the caught mate­rial, for exam­ple, into a shal­low con­tai­ner, for exam­ple, into a cake tran­s­por­ter. Maxi­mum 5 – 7 cm lay­er. Cover them with an old cur­tain, pour warm water to be about two cm abo­ve the sub­stra­te. Lea­ve them in a dark room with room tem­pe­ra­tu­re. Tubi­fex will start to suf­fo­ca­te, and about an hour or two later, they will start cra­wling through the cur­tain. We can easi­ly take them from the cur­tain with a den­se hair comb.


Niten­ky – Tubi­fex tubi­fex kamen v der Ver­gan­gen­he­it rela­tiv häu­fig in Gebie­ten vor, wo Abfall abge­las­sen wur­de – orga­nis­che Versch­mut­zung in Flie­ßge­wäs­ser – in der Nähe von Brau­e­re­ien, Mäl­ze­re­ien, Limo­na­den­fab­ri­ken, Zells­toff­müh­len, Indus­trie­an­la­gen. Sie leben im Sch­lamm in lang­sa­mer flie­ßen­den oder ruhi­gen Bächen. In Bächen gra­ben sie sich in den Sch­lamm und kön­nen sehr vor­sich­tig tief in den Boden gra­ben. Tubi­fex fin­den sich in fast jedem Bach in unse­rem Land, aber nicht in Men­gen, die für Aqu­aria­ner inte­res­sant sind. Heute wird das Was­ser oft in Klä­ran­la­gen umge­wan­delt, es gibt weni­ger Abfall und es feh­len Nährs­tof­fe. Niten­ky, wie Aqu­aria­ner sie ken­nen, haben eine braun­ro­te Far­be. In der Natur ist ihre Far­be varia­bel und hängt von der Sau­ers­toff­men­ge im Was­ser ab. Niten­ky in der Natur kön­nen auch weiß sein.

Füt­te­rung von Tubifex

Tubi­fex sind sehr gee­ig­ne­tes Fut­ter, zum Beis­piel für Wels, Sch­mer­len, Sau­gwel­se und kle­i­ne Wel­se. Sch­lamm zir­ku­liert auch lan­ge nach ihrem Fang noch in ihren Där­men. Des­halb müs­sen sie gründ­lich ges­pült und nach dem Fang min­des­tens drei Tage ver­daut wer­den. Sie sind sehr abhän­gig von fris­chem Was­ser, viel mehr als leben­de Tubi­fex, daher müs­sen sie häu­fig mit Was­ser ges­pült wer­den, oder es wird ihnen ein kons­tan­ter Was­serf­luss und ‑ablauf bere­it­ges­tellt. Es ist rat­sam, sie zum Beis­piel in fla­chen Schüs­seln auf­zu­be­wah­ren, zum Beis­piel am Boden des Kühls­chranks. Sie kön­nen sich in den Boden gra­ben, wo sie ent­we­der ver­rot­ten oder manch­mal nach einer Wei­le mas­sen­haft spa­wnen kön­nen. Wenn Sie leben­de Tubi­fex bekom­men, emp­feh­le ich, einen Teil von ihnen sofort zu füt­tern und den Rest selbst ein­zuf­rie­ren. Sie müs­sen sich kei­ne Sor­gen machen. Wenn Sie sie selbst ein­frie­ren, ble­i­ben sie in akzep­tab­lem Zus­tand. Der Punkt ist, dass ich noch nie von gef­ro­re­nen Tubi­fex aus einem Ges­chäft gehört habe, die nach dem Auf­tau­en nicht wie Sch­lamm aussehen :-(.

Tubi­fex fangen

Tubi­fex wer­den gefan­gen, indem der gesam­te Unter­grund genom­men wird, auf dem wir sie sehen, da sie schnell und vor­sich­tig in den Unter­grund gra­ben. Wir kön­nen sie heraus­neh­men, indem wir sau­be­ren Sand darauf stre­uen. Tubi­fex wer­den all­mäh­lich über den Sand krie­chen, was es ein­fa­cher macht, sie zu ent­fer­nen. Eine ande­re Met­ho­de (Neubau­er in verb, 2009): Legen Sie das gefan­ge­ne Mate­rial, zum Beis­piel in einen fla­chen Behäl­ter, zum Beis­piel in einen Kuchen­tran­s­por­ter. Maxi­mal 5 – 7 cm Schicht. Bedec­ken Sie sie mit einem alten Vor­hang, gie­ßen Sie war­mes Was­ser, das etwa zwei cm über dem Sub­strat liegt. Las­sen Sie sie in einem dunk­len Raum mit Zim­mer­tem­pe­ra­tur. Tubi­fex begin­nen zu ers­tic­ken, und etwa eine oder zwei Stun­den spä­ter begin­nen sie durch den Vor­hang zu krie­chen. Wir kön­nen sie leicht mit einem dich­ten Haar­kamm vom Vor­hang nehmen.


Use Facebook to Comment on this Post